Prashnikaप्रश्निका
Code
About
ChemistryImprovementClass 12

ISC Chemistry 2026 Improvement Paper with Answers

The ISC Chemistry 2026 Improvement Paper for Class 12: all 55 questions, 70 marks in all, in printed order and in full. It is free to download: tap "Show answer" under a question to see its answer, or use the download button to save the questions as a PDF, with or without answers; "Print this paper" below prints it as it was set.

55questions
70marks
15chapters
Q1(A)(ii)1 mark · Fill inOpen: For a particular reaction, the value of rate constant is 0·81 s⁻¹. Hence, the…

Fill in the blank with the correct word.

For a particular reaction, the value of rate constant is $0\cdot81\text{ s}^{-1}$. Hence, the reaction is of ____ order whereas in another reaction, the value of rate constant is $2\cdot5\text{ mol L}^{-1}\text{s}^{-1}$. Thus, the order of this reaction is ____.
Show answer

Answer

Blanks: first; zero

(ii) first, zero
Q1(A)(iii)1 mark · Fill inOpen: The reaction of aqueous KOH with bromopropane is an example of ____ reaction…

Fill in the blank with the correct word.

The reaction of aqueous $\text{KOH}$ with bromopropane is an example of ____ reaction while the reaction of alcoholic $\text{KOH}$ with the same compound is evidence of ____ reaction.
Show answer

Answer

Blanks: substitution; dehydrohalogenation

(iii) substitution, dehydrohalogenation
Q1(B)(i)1 mark · MCQOpen: In the complexes, [Fe(CN)₆]⁴⁻ and [Pt(en)(H₂O)₂Br(NO₂)]²⁺, the respective…

Choose the correct option.

In the complexes, $[\text{Fe}(\text{CN})_6]^{4-}$ and $[\text{Pt}(\text{en})(\text{H}_2\text{O})_2\text{Br}(\text{NO}_2)]^{2+}$, the respective oxidation numbers of central metal atoms are:
  • (a)+3 and +4
  • (b)+2 and +2
  • (c)+2 and +4
  • (d)+3 and +2
Show answer

Answer

Correct option: (c)

Answer: (c) +2 and +4 In $[\mathrm{Fe(CN)_6}]^{4-}$: $x - 6 = -4$, so $x = +2$. In $[\mathrm{Pt(en)(H_2O)_2Br(NO_2)}]^{2+}$: $x + 0 + 0 - 1 - 1 = +2$, so $x = +4$.
Q1(B)(ii)1 mark · MCQOpen: Which one of the following properties of transition metals enables them to…

Choose the correct option.

Which one of the following properties of transition metals enables them to behave as catalysts?
  • (a)Presence of vacant d-orbitals
  • (b)Formation of coloured ions
  • (c)High ionisation enthalpy
  • (d)High melting point
Show answer

Answer

Correct option: (a)

Answer: (a) Presence of vacant d-orbitals Vacant d-orbitals and variable oxidation states let transition metals form intermediates with reactants, so they act as catalysts.
Q1(B)(iii)1 mark · MCQOpen: The reactivity orders of alkyl halides for dehydrohalogenation reaction are…

Choose the correct option.

The reactivity orders of alkyl halides for dehydrohalogenation reaction are given below: (P) $\text{R-I} > \text{R-Br}$ (Q) $\text{R-Cl} > \text{R-F}$ (R) $\text{R-I} < \text{R-Br}$ (S) $\text{R-Cl} < \text{R-F}$ Which one of the following combinations represents the correct order for dehydrohalogenation reaction?
  • (a)Only (P) and (Q)
  • (b)Only (P) and (S)
  • (c)Only (Q) and (R)
  • (d)Only (Q) and (S)
Show answer

Answer

Correct option: (a)

Answer: (a) Only (P) and (Q) The C-X bond strength is C-F > C-Cl > C-Br > C-I, so the reactivity order is R-I > R-Br > R-Cl > R-F. Hence (P) and (Q) are correct.
Q1(B)(iv)1 mark · MCQOpen: Samantha suffers from deformity of bones. The doctor has advised her to consume…

Choose the correct option.

Samantha suffers from deformity of bones. The doctor has advised her to consume a particular vitamin. Identify the vitamin that the doctor has prescribed to her.
  • (a)Vitamin A
  • (b)Vitamin D
  • (c)Vitamin C
  • (d)Vitamin B
Show answer

Answer

Correct option: (b)

Answer: (b) Vitamin D Deficiency of vitamin D causes rickets (deformity of bones) in children and osteomalacia in adults.
Q1(B)(v)1 mark · MCQOpen: Identify the end product [B] in the following sequence of chemical reaction…

Choose the correct option.

Identify the end product [B] in the following sequence of chemical reaction: $\text{CH}_3\text{CHO} \xrightarrow{[\text{O}]} \text{CH}_3\text{COOH} \xrightarrow{\text{Ca(OH)}_2} [\text{A}] \xrightarrow{\text{dry distillation}} [\text{B}]$
  • (a)Formaldehyde
  • (b)Acetaldehyde
  • (c)Acetic acid
  • (d)Acetone
Show answer

Answer

Correct option: (d)

Answer: (d) Acetone Calcium acetate [A], $(\mathrm{CH_3COO})_2\mathrm{Ca}$, on dry distillation gives acetone [B], $\mathrm{CH_3COCH_3}$, and $\mathrm{CaCO_3}$.
Q1(B)(vi)1 mark · Assertion-reasonOpen: Primary, secondary and tertiary alcohols can be distinguished with the help of…

Study the Assertion and Reason and choose the correct option.

Assertion: Primary, secondary and tertiary alcohols can be distinguished with the help of Lucas reagent.

Reason: Lucas reagent is an equimolar mixture of $\text{ZnCl}_2$ and concentrated $\text{NaOH}$ solution.

  • (a)Both Assertion and Reason are true and Reason is the correct explanation for Assertion.
  • (b)Both Assertion and Reason are true but Reason is not the correct explanation for Assertion.
  • (c)Assertion is true and Reason is false.
  • (d)Both Assertion and Reason are false.
Show answer

Answer

Correct option: (c)

Answer: (c) Assertion is true and Reason is false. Primary, secondary and tertiary alcohols are distinguished by the different rates at which turbidity appears with Lucas reagent, so the Assertion is true. Lucas reagent is an equimolar mixture of anhydrous $\mathrm{ZnCl_2}$ and concentrated $\mathrm{HCl}$, not $\mathrm{NaOH}$, so the Reason is false.
Q1(B)(vii)1 mark · Assertion-reasonOpen: Osmotic pressure of 0·5 molar KCl solution is more than that of 0·5 molar urea…

Study the Assertion and Reason and choose the correct option.

Assertion: Osmotic pressure of $0\cdot5\text{ molar}$ $\text{KCl}$ solution is more than that of $0\cdot5\text{ molar}$ urea solution.

Reason: $\text{KCl}$ solution has a greater number of particles than urea solution.

  • (a)Both Assertion and Reason are true and Reason is the correct explanation for Assertion.
  • (b)Both Assertion and Reason are true but Reason is not the correct explanation for Assertion.
  • (c)Assertion is true and Reason is false.
  • (d)Both Assertion and Reason are false.
Show answer

Answer

Correct option: (a)

Answer: (a) Both Assertion and Reason are true and Reason is the correct explanation for Assertion. KCl dissociates into $\mathrm{K^+}$ and $\mathrm{Cl^-}$ ($i \approx 2$) while urea does not dissociate ($i = 1$). Osmotic pressure is a colligative property depending on the number of particles, so KCl has the higher osmotic pressure.
Q1(C)3 marks · Case basedOpen: In the year 1832, Michael Faraday performed many experiments on electrolysis…

Answer the following.

In the year 1832, Michael Faraday performed many experiments on electrolysis. He established a relationship between the amount of products liberated at the electrodes and the quantity of electricity passed through the solution to carry out electrolysis. He formulated two laws of electrolysis that are known as Faraday’s First Law and Second Law of Electrolysis. Eva, a class XII student, studied these laws and tried to find a particular amount of charge in faraday to get $27\text{ g}$ of aluminium in an experiment involving $\text{Al}^{3+} / \text{Al}$ cell.
(i)[1]
State Faraday’s First Law of Electrolysis.
(ii)[1]
How much charge in faraday would Eva need to get a coating of $27\text{ g}$ of aluminium at electrode, if she follows the following reaction? $\text{Al}^{3+} + 3\text{e}^- \rightarrow \text{Al}$ (Atomic mass of $\text{Al} = 27\text{ g mol}^{-1}$)
(iii)[1]
How much mass of zinc in grams will be obtained if the amount of charge, calculated in subpart (ii), is passed through $\text{Zn}^{2+} / \text{Zn}$ cell for the same duration? $\text{Zn}^{2+} + 2\text{e}^- \rightarrow \text{Zn}$ (Atomic mass of $\text{Zn} = 65\text{ g mol}^{-1}$)
Show answer

Answer (i)

The mass of a substance deposited or liberated at an electrode is directly proportional to the quantity of electricity passed through the electrolyte, $w \propto Q$.

Answer (ii)

Formula used: Faraday's first law: w = M*Q/(n*F) with F = 96500 C mol^-1, M = 27 g mol^-1, n = 3.0, w = 27 g, so Q = 289500 C

$\mathrm{Al^{3+} + 3e^- \rightarrow Al}$: 3 mol of electrons (3 F) deposit 1 mol (27 g) of Al.

Final answer: 3 F

Answer (iii)

Formula used: Faraday's first law: w = M*Q/(n*F) with F = 96500 C mol^-1, M = 65 g mol^-1, Q = 289500 C, n = 2.0, so w = 97.5 g

Charge = 3 F. For $\mathrm{Zn^{2+} + 2e^- \rightarrow Zn}$, 2 F deposit 65 g, so 3 F deposit $\frac{65}{2} \times 3 = 97.5$ g.

Final answer: 97.5 g

Q2(i)0.5 marks · Short answerOpen: Consider the mechanism given below derived from spectrochemical analysis of the…

Answer the following.

Consider the mechanism given below derived from spectrochemical analysis of the reaction between NO and $\mathrm{F_2}$: $\mathrm{NO + F_2 \longrightarrow NOF_2}$ (slow step) $\mathrm{NOF_2 + NO \longrightarrow 2NOF}$ (fast step) The overall reaction is: $\mathrm{2NO + F_2 \longrightarrow 2NOF}$ Write the rate law for this reaction.
Show answer

Answer

Rate $= k[\mathrm{NO}][\mathrm{F_2}]$ The rate is decided by the slow step, $\mathrm{NO + F_2 \longrightarrow NOF_2}$.
Q2(ii)0.5 marks · Short answerOpen: Consider the mechanism given below derived from spectrochemical analysis of the…

Answer the following.

Consider the mechanism given below derived from spectrochemical analysis of the reaction between NO and $\mathrm{F_2}$: $\mathrm{NO + F_2 \longrightarrow NOF_2}$ (slow step) $\mathrm{NOF_2 + NO \longrightarrow 2NOF}$ (fast step) The overall reaction is: $\mathrm{2NO + F_2 \longrightarrow 2NOF}$ What is the overall order of this reaction?
Show answer

Answer

Overall order $= 1 + 1 = 2$ (second order), from rate $= k[\mathrm{NO}][\mathrm{F_2}]$.
Q2(iii)1 mark · NumericalOpen: Consider the mechanism given below derived from spectrochemical analysis of the…

Answer the following.

Consider the mechanism given below derived from spectrochemical analysis of the reaction between NO and $\mathrm{F_2}$: $\mathrm{NO + F_2 \longrightarrow NOF_2}$ (slow step) $\mathrm{NOF_2 + NO \longrightarrow 2NOF}$ (fast step) The overall reaction is: $\mathrm{2NO + F_2 \longrightarrow 2NOF}$ Calculate the number of times the rate of reaction will increase if the concentration of $[\mathrm{NO}]$ is doubled and the concentration of $[\mathrm{F_2}]$ is tripled.
Show answer

Answer

Rate $= k[\mathrm{NO}][\mathrm{F_2}]$ New rate $= k(2[\mathrm{NO}])(3[\mathrm{F_2}]) = 6k[\mathrm{NO}][\mathrm{F_2}]$

Final answer: 6

Q3(i)1 mark · NumericalOpen: During an experiment, a scientist tried to determine the molecular mass of a…

Answer the following.

During an experiment, a scientist tried to determine the molecular mass of a protein by applying elevation of boiling point method but did not succeed. When she used osmotic pressure method, she found that $20\text{ g}$ of protein in $2$ litres solution had an osmotic pressure of $0\cdot0171\text{ atm}$ at $25^\circ\text{C}$. Based on the findings of the scientist, calculate the molecular mass of protein. ($R = 0\cdot0821\text{ dm}^3\text{ atm K}^{-1}\text{mol}^{-1}$)
Show answer

Answer

Formula used: Osmotic pressure: pi = i*C*R*T with R = 0.0821 L atm K^-1 mol^-1, T = 298 K, V = 2 L, i = 1, pi = 0.0171 atm, w2 = 20 g, so M2 = 14307 g mol^-1

$\pi = \frac{w_2 R T}{M_2 V}$, so $M_2 = \frac{w_2 R T}{\pi V}$ $T = 25 + 273 = 298\text{ K}$ $M_2 = \frac{20 \times 0.0821 \times 298}{0.0171 \times 2} = 14307\text{ g mol}^{-1}$

Final answer: 14307 g mol^-1

Q3(ii)1 mark · Short answerOpen: During an experiment, a scientist tried to determine the molecular mass of a…

Answer the following.

During an experiment, a scientist tried to determine the molecular mass of a protein by applying elevation of boiling point method but did not succeed. When she used osmotic pressure method, she found that $20\text{ g}$ of protein in $2$ litres solution had an osmotic pressure of $0\cdot0171\text{ atm}$ at $25^\circ\text{C}$. Why was the scientist unsuccessful in determining the molecular mass by using elevation of boiling point method?
Show answer

Answer

Because a protein has a very high molar mass, so a solution of it has a very small molality and the elevation of boiling point is too small to measure accurately; proteins are also unstable (denatured) at the boiling point.
Q42 marks · NumericalOpen: Calculate the value of Δ G° for the following cell at 298 K: 2Cr(s) + 3Cd²⁺(1M)…

Solve the following.

Calculate the value of $\Delta G^\circ$ for the following cell at $298\text{ K}$: $2\text{Cr(s)} + 3\text{Cd}^{2+}(1\text{M}) \rightarrow 2\text{Cr}^{3+}(1\text{M}) + 3\text{Cd(s)}$ Given $E^\circ_{\text{Cr}^{3+}/\text{Cr}} = -0\cdot74\text{ V}$, $E^\circ_{\text{Cd}^{2+}/\text{Cd}} = -0\cdot40\text{ V}$ $1\text{ faraday} = 96,500\text{ coulombs}$
Show answer

Answer

Formulas used: Standard emf of a cell: E0cell = E0cathode - E0anode with E0anode = -0.74 V, E0cathode = -0.40 V, so E0cell = 0.34 V Gibbs energy from emf: dG = -n*F*E with E = 0.34 V, F = 96500 C mol^-1, n = 6.0, so dG = -196860 J mol^-1

Cathode (reduction): $\mathrm{Cd^{2+}/Cd}$; anode (oxidation): $\mathrm{Cr/Cr^{3+}}$. $E^\circ_{cell} = E^\circ_{cathode} - E^\circ_{anode} = -0.40 - (-0.74) = 0.34\ \mathrm{V}$ $n = 6$ (2 Cr lose 6 electrons) $\Delta G^\circ = -nFE^\circ_{cell} = -6 \times 96500 \times 0.34 = -196860\ \mathrm{J\ mol^{-1}}$

Final answer: -196.86 kJ mol^-1

Q52 marks · NumericalOpen: Carbon dating method is a useful tool to estimate the age of fossils. A…

Solve the following.

Carbon dating method is a useful tool to estimate the age of fossils. A radioactive carbon-14 isotope decays with a half-life of 5730 years. An ancient wooden artifact was found to have only $80\%$ of its original C-14 content compared to a living plant. Calculate the age of the wooden artifact.
Show answer

Answer

$t = \dfrac{2.303}{k}\log\dfrac{[A]_0}{[A]}$, with $k = \dfrac{0.693}{t_{1/2}} = \dfrac{0.693}{5730} = 1.21 \times 10^{-4}\ \mathrm{yr^{-1}}$ $[A]_0 = 100$, $[A] = 80$ $t = \dfrac{2.303}{1.21 \times 10^{-4}} \log\dfrac{100}{80} = \dfrac{2.303 \times 0.0969}{1.209 \times 10^{-4}} \approx 1845\ \text{years}$

Final answer: 1845 years

Q6(i)1 mark · Short answerOpen: Co³⁺ readily loses one electron whereas Mn³⁺ readily gains one electron…

Give reasons for the following.

$\text{Co}^{3+}$ readily loses one electron whereas $\text{Mn}^{3+}$ readily gains one electron. (Atomic numbers of $\text{Co} = 27$ and $\text{Mn} = 25$)
Show answer

Answer

$\mathrm{Mn^{3+}}$ is $3d^4$: by gaining one electron it becomes $\mathrm{Mn^{2+}}$, $3d^5$, a half-filled d subshell that is extra stable, so $\mathrm{Mn^{3+}}$ readily gains an electron (it is a strong oxidising agent). The cobalt statement fits $\mathrm{Co^{2+}}$ (the printed "$\mathrm{Co^{3+}}$" appears to be a misprint): $\mathrm{Co^{2+}}$ ($3d^7$) readily loses one electron to form $\mathrm{Co^{3+}}$ ($3d^6$), which with strong-field ligands has the very stable low-spin $t_{2g}^6$ arrangement (high crystal field stabilisation energy), so Co(II) is easily oxidised to Co(III) in its complexes.
Q6(ii)1 mark · Short answerOpen: The complex ion [Ti(H₂O)₆]³⁺ is coloured. (Atomic number of Ti = 22)

Give reasons for the following.

The complex ion $[\text{Ti}(\text{H}_2\text{O})_6]^{3+}$ is coloured. (Atomic number of $\text{Ti} = 22$)
Show answer

Answer

$\mathrm{Ti^{3+}}$ has the configuration $3d^1$. In the octahedral field of water the d-orbitals split into $t_{2g}$ and $e_g$; the single electron in $t_{2g}$ absorbs visible light (d-d transition) and jumps to $e_g$, so the complex shows the complementary colour (purple).
Q7(i)1 mark · Coordination complexOpen: hexaaquairon(II) chloride

Answer the following about the coordination compound.

hexaaquairon(II) chloride
Show answer

Answer

Formula[Fe(H2O)6]Cl2
Hexaaqua = 6 $\mathrm{H_2O}$ ligands, Fe(II) gives a $2+$ complex ion, balanced by two chloride ions.
Q7(ii)1 mark · Coordination complexOpen: potassium tetrachloridoplatinate(II)

Answer the following about the coordination compound.

potassium tetrachloridoplatinate(II)
Show answer

Answer

FormulaK2[PtCl4]
Tetrachloridoplatinate(II) is $[\mathrm{PtCl_4}]^{2-}$, balanced by two $\mathrm{K^+}$.
Q8(i)1 mark · ConversionOpen: Chlorobenzene to benzoic acid

How will you bring about the following conversion?

Chlorobenzene to benzoic acid
Show answer

Answer

Equations: $\mathrm{C_{6}H_{5}Cl} + \mathrm{Mg} \xrightarrow{\text{dry}\text{ }\text{ether}} \mathrm{C_{6}H_{5}MgCl}$ $\mathrm{C_{6}H_{5}MgCl} + \mathrm{CO_{2}} \xrightarrow{\text{dry}\text{ }\text{ether}} \mathrm{C_{6}H_{5}COOMgCl}$ $\mathrm{C_{6}H_{5}COOMgCl} + \mathrm{H_{2}O} \xrightarrow{\mathrm{H_{3}O}^{+}} \mathrm{C_{6}H_{5}COOH} + \mathrm{Mg(OH)Cl}$

Chlorobenzene to benzoic acid: Grignard reagent, then carbon dioxide, then hydrolysis.
Q8(ii)1 mark · ConversionOpen: 1-bromopropane to 2-bromopropane

How will you bring about the following conversion?

1-bromopropane to 2-bromopropane
Show answer

Answer

Equations: $\mathrm{CH_{3}CH_{2}CH_{2}Br} + \mathrm{KOH} \xrightarrow{\text{alc.}\text{ }\text{KOH}\text{,}\text{ }\text{heat}} \mathrm{CH_{3}CH=CH_{2}} + \mathrm{KBr} + \mathrm{H_{2}O}$ $\mathrm{CH_{3}CH=CH_{2}} + \mathrm{HBr} \longrightarrow \mathrm{CH_{3}CHBrCH_{3}}$

1-Bromopropane to 2-bromopropane: dehydrohalogenation, then Markovnikov addition of HBr.
Q9(i)2 marks · ReactionOpen: Acetyl chloride is hydrogenated over palladium in presence of barium sulphate…

Answer the following.

Acetyl chloride is hydrogenated over palladium in presence of barium sulphate in boiling xylene. Write the balanced chemical equation and name the reaction that takes place.
Show answer

Answer

Equation: $\mathrm{CH_{3}COCl} + \mathrm{H_{2}} \xrightarrow{\text{Pd}\text{ }\text{/}\text{ }\mathrm{BaSO_{4}}\text{,}\text{ }\text{boiling}\text{ }\text{xylene}} \mathrm{CH_{3}CHO} + \mathrm{HCl}$

Reaction: Rosenmund reduction

Product: ethanal

Acetyl chloride is reduced to ethanal (acetaldehyde) by hydrogen over poisoned palladium: Rosenmund reduction.
Q9(ii)2 marks · ConversionOpen: Write chemical equations to convert each of the following: Toluene to…

Answer the following.

Write chemical equations to convert each of the following:
(a)[1]
Toluene to benzaldehyde
(b)[1]
Acetic acid to acetamide
Show answer

Answer (a)

Equations: $\mathrm{C_{6}H_{5}CH_{3}} \xrightarrow{\mathrm{CrO_{3}}\text{,}\text{ }\mathrm{(CH_{3}CO)_{2}O}\text{,}\text{ }\text{273-283}\text{ }\text{K}} \mathrm{C_{6}H_{5}CH(OCOCH_{3})_{2}}$ $\mathrm{C_{6}H_{5}CH(OCOCH_{3})_{2}} + \mathrm{H_{2}O} \xrightarrow{\mathrm{H_{3}O}^{+}} \mathrm{C_{6}H_{5}CHO} + 2\mathrm{CH_{3}COOH}$

Toluene to benzaldehyde: oxidation with chromic oxide in acetic anhydride (Etard-type oxidation) gives benzylidene diacetate, which is hydrolysed.

Answer (b)

Equations: $\mathrm{CH_{3}COOH} + \mathrm{NH_{3}} \longrightarrow \mathrm{CH_{3}COONH_{4}}$ $\mathrm{CH_{3}COONH_{4}} \xrightarrow{\text{heat}} \mathrm{CH_{3}CONH_{2}} + \mathrm{H_{2}O}$

Acetic acid to acetamide: ammonolysis to ammonium acetate, then heating.
Q10(i)1 mark · DifferentiateOpen: Phenol and acetic acid

Give a chemical test to distinguish between the following.

Phenol and acetic acid
Show answer

Answer

sodium bicarbonate test test: reagent: NaHCO3 solution; positive: acetic acid; observation: brisk effervescence of CO2; other: no change

TestPhenolAcetic acid
Sodium bicarbonate ($\mathrm{NaHCO_3}$) solutionNo effervescence (phenol is too weak an acid)Brisk effervescence of $\mathrm{CO_2}$
Q10(ii)1 mark · DifferentiateOpen: Ethanol and methanol

Give a chemical test to distinguish between the following.

Ethanol and methanol
Show answer

Answer

iodoform test: reagent: I2 / NaOH, warm; positive: ethanol; observation: yellow precipitate of iodoform (CHI3); other: no yellow precipitate

TestEthanolMethanol
Iodoform test ($\mathrm{I_2}$ / NaOH, warm)Yellow precipitate of iodoform ($\mathrm{CHI_3}$)No yellow precipitate
Q11(i)1 mark · ReactionOpen: Carbylamine reaction

Write the chemical equation for the following.

Carbylamine reaction
Show answer

Answer

Equation: $\mathrm{CH_{3}NH_{2}} + \mathrm{CHCl_{3}} + 3\mathrm{KOH} \xrightarrow{\text{alc.}\text{ }\text{KOH}\text{,}\text{ }\text{heat}} \mathrm{CH_{3}NC} + 3\mathrm{KCl} + 3\mathrm{H_{2}O}$

Reaction: Carbylamine reaction

Product: methyl isocyanide

Carbylamine reaction: a primary amine on heating with chloroform and alcoholic KOH gives an isocyanide (carbylamine) with a foul smell.
Q11(ii)1 mark · ReactionOpen: Mendius reaction

Write the chemical equation for the following.

Mendius reaction
Show answer

Answer

Equation: $\mathrm{CH_{3}CN} + 2\mathrm{H_{2}} \xrightarrow{\text{Na}\text{ }\text{/}\text{ }\mathrm{C_{2}H_{5}OH}} \mathrm{CH_{3}CH_{2}NH_{2}}$

Reaction: Mendius reaction

Product: ethylamine

Mendius reaction: an alkyl cyanide is reduced to a primary amine by sodium and alcohol (nascent hydrogen).
Q12(i)1.5 marks · CompleteOpen: Complete and balance the following reactions: (a) K₂Cr₂O₇ + H₂SO₄ + H₂S → + + +…

Answer the following.

Complete and balance the following reactions: (a) $\text{K}_2\text{Cr}_2\text{O}_7 + \text{H}_2\text{SO}_4 + \text{H}_2\text{S} \rightarrow \underline{\qquad} + \underline{\qquad} + \underline{\qquad} + \underline{\qquad}$ (b) $\text{KMnO}_4 + \text{H}_2\text{SO}_4 + \text{KI} \rightarrow \underline{\qquad} + \underline{\qquad} + \underline{\qquad} + \underline{\qquad}$
Show answer

Answer

Equations: $\mathrm{K_{2}Cr_{2}O_{7}} + 4\mathrm{H_{2}SO_{4}} + 3\mathrm{H_{2}S} \longrightarrow \mathrm{K_{2}SO_{4}} + \mathrm{Cr_{2}(SO_{4})_{3}} + 7\mathrm{H_{2}O} + 3\mathrm{S}$ $2\mathrm{KMnO_{4}} + 8\mathrm{H_{2}SO_{4}} + 10\mathrm{KI} \longrightarrow 6\mathrm{K_{2}SO_{4}} + 2\mathrm{MnSO_{4}} + 8\mathrm{H_{2}O} + 5\mathrm{I_{2}}$

(a) $\mathrm{K_2Cr_2O_7 + 4H_2SO_4 + 3H_2S \rightarrow K_2SO_4 + Cr_2(SO_4)_3 + 7H_2O + 3S}$ (b) $\mathrm{2KMnO_4 + 8H_2SO_4 + 10KI \rightarrow 6K_2SO_4 + 2MnSO_4 + 8H_2O + 5I_2}$
Q12(ii)1.5 marks · Short answerOpen: Why are transition metals used to make alloys?

Answer the following.

Why are transition metals used to make alloys?
Show answer

Answer

Transition metals have similar atomic sizes, so the atoms of one metal can easily replace those of another in the crystal lattice, forming alloys (interstitial or substitutional).
Q13(iii)1 mark · Short answerOpen: What is a zwitter ion? Draw a structure of glycine in zwitter ion form.

Answer the following.

What is a zwitter ion? Draw a structure of glycine in zwitter ion form.
Show answer

Answer

glycine (zwitterion):

A zwitter ion is a dipolar ion carrying both a positive charge (on $\mathrm{-NH_3^+}$) and a negative charge (on $\mathrm{-COO^-}$), formed when the acidic $\mathrm{-COOH}$ group of an amino acid transfers its proton to the basic $\mathrm{-NH_2}$ group. Glycine in zwitter ion form: $\mathrm{{}^+H_3N-CH_2-COO^-}$
Q14(i)1 mark · ReactionOpen: CH₃CH₂CH₂COOAg + Br₂ xrightarrow[Heat]CCl₄ \underline{\hspace{2em}}

Write the chemical equation for the following.

$\mathrm{CH_3CH_2CH_2COOAg + Br_2 \xrightarrow[Heat]{CCl_4}}$ \underline{\hspace{2em}}
Show answer

Answer

Equation: $\mathrm{CH_{3}CH_{2}CH_{2}COOAg} + \mathrm{Br_{2}} \xrightarrow{\mathrm{CCl_{4}}\text{,}\text{ }\text{heat}} \mathrm{CH_{3}CH_{2}CH_{2}Br} + \mathrm{AgBr} + \mathrm{CO_{2}}$

Product: 1-bromopropane

Hunsdiecker reaction: the silver salt loses $\mathrm{CO_2}$ and the main organic product is 1-bromopropane, $\mathrm{CH_3CH_2CH_2Br}$.
Q14(ii)1 mark · ReactionOpen: CH₃CH₂Br + AgCN (alc.) →

Write the chemical equation for the following.

$\text{CH}_3\text{CH}_2\text{Br} + \text{AgCN (alc.)} \rightarrow $
Show answer

Answer

Equation: $\mathrm{CH_{3}CH_{2}Br} + \mathrm{AgCN} \xrightarrow{\text{alc.}} \mathrm{CH_{3}CH_{2}NC} + \mathrm{AgBr}$

Product: ethyl isocyanide

Ethyl bromide with alcoholic AgCN (largely covalent) gives ethyl isocyanide as the main product.
Q14(iii)1 mark · ReactionOpen: CHCl₃ + Ag xrightarrowHeat

Write the chemical equation for the following.

$\text{CHCl}_3 + \text{Ag} \xrightarrow{\text{Heat}} $
Show answer

Answer

Equation: $2\mathrm{CHCl_{3}} + 6\mathrm{Ag} \xrightarrow{\text{heat}} \mathrm{HC≡CH} + 6\mathrm{AgCl}$

Product: ethyne

Chloroform on heating with silver powder gives ethyne (acetylene).
Q15(i)1 mark · ConversionOpen: Propan-1-ol to propyl cyanide

How will you bring about the following conversion?

Propan-1-ol to propyl cyanide
Show answer

Answer

Equations: $\mathrm{CH_{3}CH_{2}CH_{2}OH} + \mathrm{SOCl_{2}} \longrightarrow \mathrm{CH_{3}CH_{2}CH_{2}Cl} + \mathrm{SO_{2}} + \mathrm{HCl}$ $\mathrm{CH_{3}CH_{2}CH_{2}Cl} + \mathrm{KCN} \xrightarrow{\text{alc.}} \mathrm{CH_{3}CH_{2}CH_{2}CN} + \mathrm{KCl}$

Propan-1-ol to propyl cyanide: chlorination with thionyl chloride, then nucleophilic substitution with KCN.
Q15(ii)1 mark · ConversionOpen: Sodium methoxide to dimethyl ether

How will you bring about the following conversion?

Sodium methoxide to dimethyl ether
Show answer

Answer

Equation: $\mathrm{CH_{3}ONa} + \mathrm{CH_{3}Br} \longrightarrow \mathrm{CH_{3}OCH_{3}} + \mathrm{NaBr}$

Sodium methoxide to dimethyl ether: Williamson synthesis with methyl bromide.
Q15(iii)1 mark · ConversionOpen: Phenol to chlorobenzene

How will you bring about the following conversion?

Phenol to chlorobenzene
Show answer

Answer

Equations: $\mathrm{C_{6}H_{5}OH} + \mathrm{Zn} \xrightarrow{\text{heat}} \mathrm{C_{6}H_{6}} + \mathrm{ZnO}$ $\mathrm{C_{6}H_{6}} + \mathrm{Cl_{2}} \xrightarrow{\text{anhydrous}\text{ }\mathrm{FeCl_{3}}} \mathrm{C_{6}H_{5}Cl} + \mathrm{HCl}$

Phenol to chlorobenzene: reduction with zinc dust to benzene, then chlorination.
Q16(i)1.5 marks · IdentifyOpen: C₆H₅NO₂ xrightarrow[Heat]Sn / HCl [A] xrightarrow[0-5°C]HNO₂ + HCl [B]…

Identify the compounds in the following.

$\text{C}_6\text{H}_5\text{NO}_2 \xrightarrow[\text{Heat}]{\text{Sn / HCl}} [\text{A}] \xrightarrow[0-5^\circ\text{C}]{\text{HNO}_2 + \text{HCl}} [\text{B}] \xrightarrow{\text{CuCN / HCN}} [\text{C}]$
Show answer

Answer

A - aniline: C6H5NH2

B - benzenediazonium chloride: C6H5N2Cl

C - benzonitrile: C6H5CN

A = aniline ($\mathrm{C_6H_5NH_2}$) B = benzenediazonium chloride ($\mathrm{C_6H_5N_2^+Cl^-}$) C = benzonitrile ($\mathrm{C_6H_5CN}$)
Q16(ii)1.5 marks · IdentifyOpen: C₂H₅Cl xrightarrowalc. KCN [A] xrightarrow4[H] [B] xrightarrow[heat]CHCl₃ +…

Identify the compounds in the following.

$\text{C}_2\text{H}_5\text{Cl} \xrightarrow{\text{alc. KCN}} [\text{A}] \xrightarrow{4[\text{H}]} [\text{B}] \xrightarrow[\text{heat}]{\text{CHCl}_3 + \text{alc. KOH}} [\text{C}]$
Show answer

Answer

A - propanenitrile: CH3CH2CN

B - propan-1-amine: CH3CH2CH2NH2

C - 1-isocyanopropane (propyl isocyanide): CH3CH2CH2NC

A = propanenitrile ($\mathrm{C_2H_5CN}$) B = propan-1-amine ($\mathrm{CH_3CH_2CH_2NH_2}$) C = propyl isocyanide ($\mathrm{CH_3CH_2CH_2NC}$)
Q17(ii)1.5 marks · NumericalOpen: The rate constant for a reaction is 0·05 s⁻¹ at 300 K and 0·5 s⁻¹ at 310 K…

Answer the following.

The rate constant for a reaction is $0\cdot05\text{ s}^{-1}$ at $300\text{ K}$ and $0\cdot5\text{ s}^{-1}$ at $310\text{ K}$. Calculate the activation energy for the reaction. ($R = 8\cdot314\text{ J K}^{-1}\text{mol}^{-1}$)
Show answer

Answer

Formula used: Arrhenius equation at two temperatures: log10(k2/k1) = Ea/(2.303*R)*(T2 - T1)/(T1*T2) with R = 8.314 J K^-1 mol^-1, T1 = 300 K, T2 = 310 K, k1 = 0.05 s^-1, k2 = 0.5 s^-1, so Ea = 178000 J mol^-1

$\log\dfrac{k_2}{k_1} = \dfrac{E_a}{2.303R}\left(\dfrac{T_2 - T_1}{T_1 T_2}\right)$ $\log\dfrac{0.5}{0.05} = 1 = \dfrac{E_a}{2.303 \times 8.314}\times\dfrac{10}{300 \times 310}$ $E_a = \dfrac{2.303 \times 8.314 \times 300 \times 310}{10} = 1.78 \times 10^{5}\ \mathrm{J\ mol^{-1}}$

Final answer: 178 kJ mol^-1

Q18(i)3 marks · NumericalOpen: Answer the following: (1) Calculate the charge required in coulombs to deposit…

Solve the following.

Answer the following:
(a)[1.5]
(1) Calculate the charge required in coulombs to deposit $6\cdot35\text{ g}$ of copper at cathode from $\text{CuSO}_4$ solution. (2) How much time is required for deposition of copper if an electric current of $3\cdot5\text{ ampere}$ is passed through the electrolyte mentioned above? (Atomic Mass of $\text{Cu} = 63\cdot5\text{ g mol}^{-1}$)
(b)[1.5]
Can an aluminium vessel be used to store dil. $\text{HCl}$? Give a reason for your answer by referring to the values given below. $E^\circ_{\text{Al}^{3+}/\text{Al}} = -1\cdot66\text{ V}; E^\circ_{\text{H}^+/\frac{1}{2}\text{H}_2} = 0\cdot0\text{ V}$
Show answer

Answer (a)

Formulas used: Faraday's first law: w = M*Q/(n*F) with F = 96500 C mol^-1, M = 63.5 g mol^-1, n = 2.0, w = 6.35 g, so Q = 19300 C Faraday's first law: w = M*Q/(n*F) with I = 3.5 A, M = 63.5 g mol^-1, n = 2.0, w = 6.35 g, so t = 5514 s

(1) Moles of Cu $= \dfrac{6.35}{63.5} = 0.1$ mol. $\mathrm{Cu^{2+} + 2e^- \rightarrow Cu}$, so charge $= 0.1 \times 2 \times 96500 = 19300\ \mathrm{C}$. (2) $t = \dfrac{Q}{I} = \dfrac{19300}{3.5} = 5514\ \mathrm{s}$ (about 92 minutes).

Final answer: 19300 C

Answer (b)

Equation: $2\mathrm{Al} + 6\mathrm{HCl} \longrightarrow 2\mathrm{AlCl_{3}} + 3\mathrm{H_{2}}$

No. Because $E^\circ_{Al^{3+}/Al} = -1.66\ \mathrm{V}$ is much lower than $E^\circ_{H^+/H_2} = 0.0\ \mathrm{V}$, aluminium is a stronger reducing agent than hydrogen and is oxidised by dil. HCl, liberating hydrogen, so the vessel would be corroded. $E^\circ_{cell} = 0.0 - (-1.66) = +1.66\ \mathrm{V}$ (positive, reaction feasible).
Q18(ii)3 marks · NumericalOpen: Answer the following: Ionic conductance at infinite dilution of Al³⁺ and SO₄²⁻…

Solve the following.

Answer the following:
(a)[1.5]
Ionic conductance at infinite dilution of $\text{Al}^{3+}$ and $\text{SO}_4^{2-}$ ions are $189\text{ ohm}^{-1}\text{cm}^2\text{mol}^{-1}$ and $160\text{ ohm}^{-1}\text{cm}^2\text{mol}^{-1}$ respectively. Calculate the molar conductance of $\text{Al}_2(\text{SO}_4)_3$ at infinite dilution.
(b)[1.5]
The resistance of $0\cdot1\text{ N}$ solution of an electrolyte in a conducting cell was found to be $15\text{ ohm}$. Calculate the following if the cell constant is $0\cdot367\text{ cm}^{-1}$. (1) Conductance (C) (2) Specific conductance ($\kappa$) (3) Equivalent conductance ($\Lambda_{\text{eq}}$)
Show answer

Answer (a)

$\Lambda^\circ_m[\mathrm{Al_2(SO_4)_3}] = 2\lambda^\circ(\mathrm{Al^{3+}}) + 3\lambda^\circ(\mathrm{SO_4^{2-}}) = 2(189) + 3(160) = 378 + 480 = 858$

Final answer: 858 ohm^-1 cm^2 mol^-1

Answer (b)

Formula used: Conductivity from resistance: kappa = Gstar/Rcell with Gstar = 0.367 cm^-1, Rcell = 15 ohm, so kappa = 0.02447 S cm^-1

(1) $C = \dfrac{1}{R} = \dfrac{1}{15} = 0.0667\ \mathrm{ohm^{-1}}$ (S) (2) $\kappa = G^* \times C = 0.367 \times 0.0667 = 0.0245\ \mathrm{ohm^{-1}\ cm^{-1}}$ (3) $\Lambda_{eq} = \dfrac{\kappa \times 1000}{N} = \dfrac{0.02447 \times 1000}{0.1} = 244.7\ \mathrm{ohm^{-1}\ cm^2\ eq^{-1}}$

Final answer: 244.7 S cm^2 eq^-1

Q19(i)2.5 marks · ReactionOpen: What happens when (write chemical equations): (a) Benzaldehyde is heated with…

Answer the following.

What happens when (write chemical equations): (a) Benzaldehyde is heated with alcoholic $\text{KCN}$. (b) Formaldehyde is heated with conc. $\text{NaOH}$ solution. (c) Acetone is treated with hydroxylamine.
Show answer

Answer

Equations: $2\mathrm{C_{6}H_{5}CHO} \xrightarrow{\text{alc.}\text{ }\text{KCN}\text{,}\text{ }\text{heat}} \mathrm{C_{6}H_{5}CH(OH)COC_{6}H_{5}}$ $2\mathrm{HCHO} + \mathrm{NaOH} \xrightarrow{\text{conc.}\text{ }\text{NaOH}\text{,}\text{ }\text{heat}} \mathrm{CH_{3}OH} + \mathrm{HCOONa}$ $\mathrm{CH_{3}COCH_{3}} + \mathrm{NH_{2}OH} \longrightarrow \mathrm{(CH_{3})_{2}C=NOH} + \mathrm{H_{2}O}$

Products: benzoin, methanol and sodium formate, acetoxime

(a) Benzoin condensation: two molecules of benzaldehyde condense to give benzoin. (b) Cannizzaro reaction: formaldehyde (no $\alpha$-hydrogen) gives methanol and sodium formate. (c) Acetone condenses with hydroxylamine to give acetoxime (acetone oxime) and water.
Q19(ii)2.5 marks · IdentifyOpen: An aliphatic compound [A] with the molecular formula C₂H₄O is reduced to…

Answer the following.

An aliphatic compound [A] with the molecular formula $\text{C}_2\text{H}_4\text{O}$ is reduced to compound [B]. Compound [B] reacts with $\text{PCl}_5$ and forms compound [C]. Compound [C] on treatment with alcoholic $\text{KOH}$ forms compound [D] which is used to make a daily use plastic. Identify the compounds [A], [B], [C] and [D].
Show answer

Answer

Equations: $\mathrm{CH_{3}CHO} + \mathrm{H_{2}} \xrightarrow{\text{Ni}\text{,}\text{ }\text{reduction}} \mathrm{C_{2}H_{5}OH}$ $\mathrm{C_{2}H_{5}OH} + \mathrm{PCl_{5}} \longrightarrow \mathrm{C_{2}H_{5}Cl} + \mathrm{POCl_{3}} + \mathrm{HCl}$ $\mathrm{C_{2}H_{5}Cl} + \mathrm{KOH} \xrightarrow{\text{alc.}\text{ }\text{KOH}\text{,}\text{ }\text{heat}} \mathrm{CH_{2}=CH_{2}} + \mathrm{KCl} + \mathrm{H_{2}O}$

A - ethanal: CH3CHO

B - ethanol: C2H5OH

C - chloroethane: C2H5Cl

D - ethene: CH2=CH2

A = ethanal ($\mathrm{CH_3CHO}$) B = ethanol ($\mathrm{C_2H_5OH}$) C = chloroethane ($\mathrm{C_2H_5Cl}$) D = ethene ($\mathrm{CH_2=CH_2}$), which polymerises to polythene.
Q20(i)1.5 marks · NumericalOpen: An aqueous solution containing 1·25 g BaCl₂ (molecular mass 208·34 g mol⁻¹) in…

Answer the following.

An aqueous solution containing $1\cdot25\text{ g}$ $\text{BaCl}_2$ (molecular mass $208\cdot34\text{ g mol}^{-1}$) in $100\text{ g}$ of water boils at $100\cdot085^\circ\text{C}$. Calculate the degree of dissociation of $\text{BaCl}_2$. ($K_b$ for water $= 0\cdot52\text{ K kg mol}^{-1}$)
Show answer

Answer

Formulas used: Elevation of boiling point: dTb = i*Kb*m with Kb = 0.52 K kg mol^-1, M2 = 208.34 g mol^-1, w1 = 100 g, w2 = 1.25 g, dTb = 0.085 K, so i = 2.72 Degree of dissociation from i: alpha = (i - 1)/(nu - 1) with i = 2.72, nu = 3.0, so alpha = 0.86

$\Delta T_b = 100.085 - 100 = 0.085\ \mathrm{K}$; $m = \dfrac{1.25/208.34}{0.100} = 0.0600\ \mathrm{mol\ kg^{-1}}$ $\Delta T_b = i K_b m \Rightarrow i = \dfrac{0.085}{0.52 \times 0.06} = 2.72$ $\mathrm{BaCl_2 \rightarrow Ba^{2+} + 2Cl^-}$ ($\nu = 3$): $\alpha = \dfrac{i - 1}{\nu - 1} = \dfrac{2.72 - 1}{2} = 0.862$

Final answer: 0.862

Q20(ii)1.5 marks · Short answerOpen: What happens when red blood cells are placed in pure water?

Answer the following.

What happens when red blood cells are placed in pure water?
Show answer

Answer

The red blood cells swell and burst (haemolysis), because water enters them by endosmosis through the cell membrane: pure water is hypotonic to the cell fluid.
Q20(iii)2 marks · Short answerOpen: What are isotonic solutions? Why does the phenomenon of osmosis not occur when…

Answer the following.

What are isotonic solutions? Why does the phenomenon of osmosis not occur when two isotonic solutions are separated by a semi-permeable membrane?
Show answer

Answer

Isotonic solutions are solutions having the same osmotic pressure at the same temperature. Osmosis does not occur because there is no difference in osmotic pressure (concentration) across the semi-permeable membrane, so solvent passes through at equal rates in both directions and there is no net flow.
Q21(i)5 marks · Short answerOpen: Answer the following: On the basis of Valence Bond Theory (VBT), state the…

Answer the following.

Answer the following:
(a)[1.5]
On the basis of Valence Bond Theory (VBT), state the following regarding $[\text{CoF}_6]^{3-}$ complex ion: (Atomic Number of $\text{Co} = 27$) (1) Oxidation state of cobalt (2) Type of hybridisation of the central metal atom (3) Magnetic behaviour of the complex (4) IUPAC name of the complex
(b)[1.5]
Consider the complex ions $[\text{Fe}(\text{CN})_6]^{3-}$ and $[\text{Fe}(\text{CN})_6]^{4-}$. Which complex ion will be attracted towards applied magnetic field? Justify your answer with a reason. (Atomic Number of $\text{Fe} = 26$)
(c)[2]
What types of isomerism do the following pairs of compounds show? (1) $[\text{Co}(\text{NH}_3)_5\text{Br}]\text{SO}_4$ and $[\text{Co}(\text{NH}_3)_5\text{SO}_4]\text{Br}$ (2) $[\text{Cr}(\text{H}_2\text{O})_4\text{Cl}_2]\text{Cl}\cdot 2\text{H}_2\text{O}$ and $[\text{Cr}(\text{H}_2\text{O})_5\text{Cl}]\text{Cl}_2\cdot\text{H}_2\text{O}$
Show answer

Answer (a)

IUPAC namehexafluoridocobaltate(III) ion
Oxidation state3
Hybridisationsp3d2
Magnetic behaviourparamagnetic
(1) Oxidation state of Co: $x - 6 = -3$, so $+3$. (2) $\mathrm{Co^{3+}}$ is $3d^6$; $\mathrm{F^-}$ is a weak-field ligand, so no pairing occurs and the $4s$, $4p$ and two $4d$ orbitals are used: $sp^3d^2$ (outer orbital, octahedral). (3) 4 unpaired electrons: paramagnetic. (4) Hexafluoridocobaltate(III) ion.

Answer (b)

$[\mathrm{Fe(CN)_6}]^{3-}$ is attracted by the magnetic field. Because $\mathrm{Fe^{3+}}$ is $3d^5$ and $\mathrm{CN^-}$ is a strong-field ligand, the electrons pair up to give $t_{2g}^5$ with one unpaired electron (paramagnetic), whereas in $[\mathrm{Fe(CN)_6}]^{4-}$, $\mathrm{Fe^{2+}}$ is $3d^6$ giving $t_{2g}^6$ with no unpaired electrons (diamagnetic).

Answer (c)

(1) Ionisation isomerism (2) Hydrate isomerism
Q21(ii)5 marks · Short answerOpen: Answer the following: [NiCl₄]²⁻ is paramagnetic while [Ni(CO)₄] is diamagnetic…

Answer the following.

Answer the following:
(a)[1.5]
$[\text{NiCl}_4]^{2-}$ is paramagnetic while $[\text{Ni}(\text{CO})_4]$ is diamagnetic though both are tetrahedral. Explain the statement by referring to the Valence Bond Theory. (Atomic number of $\text{Ni} = 28$)
(b)[1.5]
Write the IUPAC name of complex compound $[\text{PtBr}_2(\text{en})_2]\text{Cl}_2$.
(c)[2]
Draw a diagram to show the splitting of d orbital in an octahedral crystal field for a complex having $d^6$ configuration in strong ligand field.
Show answer

Answer (a)

In $[\mathrm{NiCl_4}]^{2-}$, Ni is $+2$ ($3d^8$). $\mathrm{Cl^-}$ is a weak-field ligand, so the 3d electrons do not pair; two unpaired electrons remain and one $4s$ and three $4p$ orbitals hybridise to give $sp^3$ (tetrahedral): paramagnetic. In $[\mathrm{Ni(CO)_4}]$, Ni is $0$ ($3d^8 4s^2$). CO is a strong-field ligand, so the $4s$ electrons shift to 3d, giving $3d^{10}$ with all electrons paired; $sp^3$ hybridisation (tetrahedral): diamagnetic.

Answer (b)

IUPAC namedibromidobis(ethane-1,2-diamine)platinum(IV) chloride
Pt is $+4$: $x - 2 + 0 = +2$; ligands in alphabetical order (bromido, ethane-1,2-diamine).

Answer (c)

Octahedral crystal field splitting for $d^6$ in a strong ligand field (low spin): the five d orbitals split into a lower $t_{2g}$ set ($d_{xy}, d_{yz}, d_{zx}$) and a higher $e_g$ set ($d_{x^2-y^2}, d_{z^2}$) separated by $\Delta_o$; all six electrons pair up in $t_{2g}$ ($t_{2g}^6 e_g^0$), zero unpaired electrons (diamagnetic); CFSE $= -2.4\Delta_o$ (plus pairing energy).

About this improvement paper

The ISC Chemistry 2026 Improvement Paper is a improvement paper for Class 12: 55 questions in printed order, 70 marks in all, asked from 15 chapters. An improvement paper is the paper of the improvement examination, which candidates who sit a subject again to improve their marks take.

The layout of the current Chemistry paper (sections, marks, choices) is in the paper pattern guide.

By section

SectionQuestionsMarks printed*
A1214
B1922
C1724
D720

By kind of question

KindQuestionsMarks printed*
Short answer1423.5
Numerical815
Reaction79.5
Conversion67
Identify35.5
MCQ55
Fill in44
Case based13
Assertion-reason22
Differentiate22
Coordination complex22
Complete11.5

By chapter

ChapterQuestionsMarks printed*
Coordination Compounds513
Electrochemistry411
Aldehydes and Ketones510
Solutions79
Chemical Kinetics78
Haloalkanes and Haloarenes77
d-and f-Block Elements56
Aliphatic Amines44.5
Alcohols33
Phenols22
Vitamins22
Diazonium salts11.5
Aliphatic Ethers11
Nucleic Acids11
Proteins11

* Marks are those printed on each question; where a question offers an either-or choice, both options are counted, so the totals can come to more than the paper’s own total.

Common questions

How many questions are in the ISC Chemistry 2026 Improvement Paper?

55 questions, 70 marks in all, shown in full and in printed order on this page.

Which chapters does the ISC Chemistry 2026 Improvement Paper ask most about?

By number of questions: Solutions (7), Chemical Kinetics (7), Haloalkanes and Haloarenes (7) and Coordination Compounds (5).

Does this page have the answers to the ISC Chemistry 2026 Improvement Paper?

Tap “Show answer” under a question to see its answer. The download button saves the paper as a PDF, with or without the answers.