Prashnikaप्रश्निका
Code
About
ChemistryClass 12

Electrochemistry - ISC Class 12 Chemistry Questions with Answers

87 past-paper questions on Electrochemistry from ISC Class 12 Chemistry papers (2027-2018), newest first, in full. Questions 1-20 are on this page, 20 to a page. Tap "Show answer" under a question to see its answer. The syllabus covers Electrochemical cells, Galvanic cells, Measurement of potential, Standard hydrogen electrode, Standard electrode potential, Cell notation, Electrochemical series and Nernst equation and more.

87questions
9years
2027newest
20276 questions
3 marks · NumericalOpen: The molar conductivities at infinite dilution for NaI, CH₃COONa and (CH₃COO)₂Mg…

Solve the following.

The molar conductivities at infinite dilution for $\text{NaI}$, $\text{CH}_3\text{COONa}$ and $(\text{CH}_3\text{COO})_2\text{Mg}$ are $126\cdot9$, $91\cdot0$ and $187\cdot8\text{ ohm}^{-1}\text{ cm}^2\text{ mol}^{-1}$ respectively at $25^\circ\text{C}$. Find out the molar conductivity of $\text{MgI}_2$ at infinite dilution by using Kohlrausch’s law of independent migration of ions.
Show answer

Answer

Official answer key
$\Lambda^\circ_m(\mathrm{MgI_2}) = \Lambda^\circ_m[(\mathrm{CH_3COO})_2\mathrm{Mg}] + 2\Lambda^\circ_m(\mathrm{NaI}) - 2\Lambda^\circ_m(\mathrm{CH_3COONa})$ $= 187.8 + 2(126.9) - 2(91.0) = 259.6\text{ ohm}^{-1}\text{ cm}^2\text{ mol}^{-1}$

Final answer: 259.6 ohm^-1 cm^2 mol^-1

3 marks · NumericalOpen: Three electrolytic cells (X), (Y) and (Z) containing solutions of AgNO₃, CuSO₄…

Solve the following.

Three electrolytic cells (X), (Y) and (Z) containing solutions of $\text{AgNO}_3$, $\text{CuSO}_4$ and $\text{ZnSO}_4$ respectively are connected in series. A steady current of $1\cdot5\text{ ampere}$ is passed through these electrolytic cells until $1\cdot45\text{ g}$ of silver is deposited at the cathode of cell (X). (Atomic weight of $\text{Ag} = 108$, $\text{Cu} = 63\cdot5$ and $\text{Zn} = 65\cdot3$)
(a)[1.5]
How much of charge is given to the electrolyte solution?
(b)[1.5]
What mass of copper and zinc is deposited at the respective cathode?
Show answer

Answer (a)

Official answer key

Formula used: Faraday's first law: w = M*Q/(n*F) with M = 108 g mol^-1, n = 1, w = 1.45 g, so Q = 1295.6 C

$\mathrm{Ag^+ + e^- \rightarrow Ag}$: 108 g of Ag is deposited by 96500 C. $Q = \dfrac{96500\times 1.45}{108} = 1295.6\text{ C}$

Final answer: 1295.6 C

Answer (b)

Official answer key
Cell Y: $\mathrm{Cu^{2+} + 2e^- \rightarrow Cu}$; $2\times 96500$ C deposit 63.5 g of Cu. Mass of Cu $= \dfrac{63.5\times 1295.6}{2\times 96500} = 0.426\text{ g}$ Cell Z: $\mathrm{Zn^{2+} + 2e^- \rightarrow Zn}$; $2\times 96500$ C deposit 65.3 g of Zn. Mass of Zn $= \dfrac{65.3\times 1295.6}{2\times 96500} = 0.438\text{ g}$

Final answer: 0.426 g

1 mark · Assertion-reasonOpen: Magnesium metal can liberate H₂ gas from an aqueous solution of HCl.

Study the Assertion and Reason and choose the correct option.

Assertion: Magnesium metal can liberate $\text{H}_2$ gas from an aqueous solution of $\text{HCl}$.

Reason: Magnesium has positive value of standard reduction electrode potential.

  • aBoth Assertion and Reason are true, and Reason is the correct explanation for Assertion.
  • bBoth Assertion and Reason are true, but Reason is not the correct explanation for Assertion.
  • cAssertion is true and Reason is false.
  • dBoth Assertion and Reason are false.
Show answer

Answer

Official answer key

Correct option: c

(c) Assertion is true and Reason is false. Mg liberates $\text{H}_2$ from HCl because its standard reduction potential is negative ($-2\cdot37\text{ V}$), not positive.
2 marks · ArrangeOpen: The standard reduction electrode potential (E°) of some metals is given below…

Arrange the following in the order asked.

The standard reduction electrode potential ($E^\circ$) of some metals is given below:
Metal$E^\circ$
$\text{Ag}^+/\text{Ag}$$+0\cdot80\text{V}$
$\text{Mg}^{2+}/\text{Mg}$$-2\cdot37\text{V}$
$\text{Li}^+/\text{Li}$$-3\cdot05\text{V}$
$\text{Cu}^{2+}/\text{Cu}$$+0\cdot34\text{V}$
$\text{Fe}^{2+}/\text{Fe}$$-0\cdot44\text{V}$
Arrange these metals in the increasing order of their reducing power. Justify the order.
Show answer

Answer

Official answer key

Order, first to last: Ag, Cu, Fe, Mg, Li

Increasing order of reducing power: Ag < Cu < Fe < Mg < Li. Reducing power is inversely related to the reduction potential: the lower (more negative) the standard reduction potential, the greater the tendency of the metal to lose electrons, so the greater its reducing power.
1 mark · Fill inOpen: Electrochemical equivalent (Z) is the quantity of substance deposited or…

Fill in the blank with the correct word.

Electrochemical equivalent (Z) is the quantity of substance deposited or discharged by a charge of ________ coulomb, whereas the equivalent conductance (E) is the amount of substance deposited or discharged by a charge of _________ coulombs.
Show answer

Answer

Official answer key

Blanks: one; 96500

One, 96500
2 marks · NumericalOpen: Write the Nernst equation and calculate the emf of the following cell at 298K…

Solve the following.

Write the Nernst equation and calculate the emf of the following cell at 298K. $\text{Mg}(s) \mid \text{Mg}^{2+}(1\times 10^{-3}\text{M}) \parallel \text{Cu}^{2+}(1\times 10^{-4}\text{M}) \mid \text{Cu}(s)$ Given: $E^\circ(\text{Mg}^{2+}/\text{Mg}) = -2\cdot373\text{V}$, $E^\circ(\text{Cu}^{2+}/\text{Cu}) = +0\cdot337\text{V}$
Show answer

Answer

Official answer key

Formulas used: Standard emf of a cell: E0cell = E0cathode - E0anode with E0anode = -2.373 V, E0cathode = 0.337 V, so E0cell = 2.71 V Nernst equation at 298 K: E = E0 - 0.0591/n*log10(Q) with Q = 10, n = 2, E0 = 2.71 V, so E = 2.68 V

Nernst equation: $E_{cell} = E^\circ_{cell} - \dfrac{0.059}{n}\log\dfrac{[\mathrm{Mg^{2+}}]}{[\mathrm{Cu^{2+}}]}$ $E^\circ_{cell} = E^\circ_{cathode} - E^\circ_{anode} = 0.337 - (-2.373) = 2.71\text{ V}$ $E_{cell} = 2.71 - \dfrac{0.059}{2}\log\dfrac{10^{-3}}{10^{-4}} = 2.71 - 0.0295\times 1 = 2.6805\text{ V} \approx 2.68\text{ V}$

Final answer: 2.68 V

202612 questions
3 marks · NumericalOpen: Answer the following: (1) Calculate the charge required in coulombs to deposit…

Solve the following.

Answer the following:
(a)[1.5]
(1) Calculate the charge required in coulombs to deposit $6\cdot35\text{ g}$ of copper at cathode from $\text{CuSO}_4$ solution. (2) How much time is required for deposition of copper if an electric current of $3\cdot5\text{ ampere}$ is passed through the electrolyte mentioned above? (Atomic Mass of $\text{Cu} = 63\cdot5\text{ g mol}^{-1}$)
(b)[1.5]
Can an aluminium vessel be used to store dil. $\text{HCl}$? Give a reason for your answer by referring to the values given below. $E^\circ_{\text{Al}^{3+}/\text{Al}} = -1\cdot66\text{ V}; E^\circ_{\text{H}^+/\frac{1}{2}\text{H}_2} = 0\cdot0\text{ V}$
Show answer

Answer (a)

Formulas used: Faraday's first law: w = M*Q/(n*F) with F = 96500 C mol^-1, M = 63.5 g mol^-1, n = 2.0, w = 6.35 g, so Q = 19300 C Faraday's first law: w = M*Q/(n*F) with I = 3.5 A, M = 63.5 g mol^-1, n = 2.0, w = 6.35 g, so t = 5514 s

(1) Moles of Cu $= \dfrac{6.35}{63.5} = 0.1$ mol. $\mathrm{Cu^{2+} + 2e^- \rightarrow Cu}$, so charge $= 0.1 \times 2 \times 96500 = 19300\ \mathrm{C}$. (2) $t = \dfrac{Q}{I} = \dfrac{19300}{3.5} = 5514\ \mathrm{s}$ (about 92 minutes).

Final answer: 19300 C

Answer (b)

Equation: $2\mathrm{Al} + 6\mathrm{HCl} \longrightarrow 2\mathrm{AlCl_{3}} + 3\mathrm{H_{2}}$

No. Because $E^\circ_{Al^{3+}/Al} = -1.66\ \mathrm{V}$ is much lower than $E^\circ_{H^+/H_2} = 0.0\ \mathrm{V}$, aluminium is a stronger reducing agent than hydrogen and is oxidised by dil. HCl, liberating hydrogen, so the vessel would be corroded. $E^\circ_{cell} = 0.0 - (-1.66) = +1.66\ \mathrm{V}$ (positive, reaction feasible).
2 marks · NumericalOpen: The molar conductivities at infinite dilution (Λ_m^∞) for NaI, CH₃COONa and…

Solve the following.

The molar conductivities at infinite dilution ($\Lambda_m^\infty$) for $\text{NaI}$, $\text{CH}_3\text{COONa}$ and $(\text{CH}_3\text{COO})_2\text{Mg}$ are $126\cdot9$, $91\cdot0$ and $187\cdot8\text{ ohm}^{-1}\text{ cm}^2\text{ mol}^{-1}$ respectively at $25^\circ\text{C}$. What is the molar conductivity of $\text{MgI}_2$ at infinite dilution?
Show answer

Answer

Official answer key

Formula used: Kohlrausch's law: Lm0 = L1 + L2 - L3: Lm0 = L1 + L2 - L3 with L1 = 187.8 S cm^2 mol^-1, L2 = 253.8 S cm^2 mol^-1, L3 = 182.0 S cm^2 mol^-1, so Lm0 = 259.6 S cm^2 mol^-1

By Kohlrausch's law: $\Lambda_m^\circ(\mathrm{MgI_2}) = \Lambda_m^\circ[(\mathrm{CH_3COO})_2\mathrm{Mg}] + 2\Lambda_m^\circ(\mathrm{NaI}) - 2\Lambda_m^\circ(\mathrm{CH_3COONa}) = 187.8 + 2(126.9) - 2(91.0) = 259.6$

Final answer: 259.6 ohm^-1 cm^2 mol^-1

3 marks · Case basedOpen: In the year 1832, Michael Faraday performed many experiments on electrolysis…

Answer the following.

In the year 1832, Michael Faraday performed many experiments on electrolysis. He established a relationship between the amount of products liberated at the electrodes and the quantity of electricity passed through the solution to carry out electrolysis. He formulated two laws of electrolysis that are known as Faraday’s First Law and Second Law of Electrolysis. Eva, a class XII student, studied these laws and tried to find a particular amount of charge in faraday to get $27\text{ g}$ of aluminium in an experiment involving $\text{Al}^{3+} / \text{Al}$ cell.
(i)[1]
State Faraday’s First Law of Electrolysis.
(ii)[1]
How much charge in faraday would Eva need to get a coating of $27\text{ g}$ of aluminium at electrode, if she follows the following reaction? $\text{Al}^{3+} + 3\text{e}^- \rightarrow \text{Al}$ (Atomic mass of $\text{Al} = 27\text{ g mol}^{-1}$)
(iii)[1]
How much mass of zinc in grams will be obtained if the amount of charge, calculated in subpart (ii), is passed through $\text{Zn}^{2+} / \text{Zn}$ cell for the same duration? $\text{Zn}^{2+} + 2\text{e}^- \rightarrow \text{Zn}$ (Atomic mass of $\text{Zn} = 65\text{ g mol}^{-1}$)
Show answer

Answer (i)

The mass of a substance deposited or liberated at an electrode is directly proportional to the quantity of electricity passed through the electrolyte, $w \propto Q$.

Answer (ii)

Formula used: Faraday's first law: w = M*Q/(n*F) with F = 96500 C mol^-1, M = 27 g mol^-1, n = 3.0, w = 27 g, so Q = 289500 C

$\mathrm{Al^{3+} + 3e^- \rightarrow Al}$: 3 mol of electrons (3 F) deposit 1 mol (27 g) of Al.

Final answer: 3 F

Answer (iii)

Formula used: Faraday's first law: w = M*Q/(n*F) with F = 96500 C mol^-1, M = 65 g mol^-1, Q = 289500 C, n = 2.0, so w = 97.5 g

Charge = 3 F. For $\mathrm{Zn^{2+} + 2e^- \rightarrow Zn}$, 2 F deposit 65 g, so 3 F deposit $\frac{65}{2} \times 3 = 97.5$ g.

Final answer: 97.5 g

3 marks · Case basedOpen: Vishal set up an experiment to find the resistance of aqueous KCl solution for…

Answer the following.

Vishal set up an experiment to find the resistance of aqueous $\text{KCl}$ solution for different concentrations at $298\text{ K}$ using a conductivity cell connected to a Wheatstone bridge. He fed the Wheatstone bridge with A.C. power in the audio frequency range 550 to 5000 cycles per second. Once the resistance was calculated from null point, he also calculated the conductivity ($\kappa$) and molar conductivity ($\Lambda_m$) and recorded his readings in tabular form which is given below.
S.No.Conc. (M)$\kappa\text{ (S cm}^{-1}\text{)}$$\Lambda_m\text{ (S cm}^2\text{ mol}^{-1}\text{)}$
1.$1\cdot00$$111\cdot3 \times 10^{-3}$$111\cdot3$
2.$0\cdot10$$12\cdot9 \times 10^{-3}$$129\cdot0$
3.$0\cdot01$$1\cdot41 \times 10^{-3}$$141\cdot0$
(i)[1]
Why did the molar conductivity increase though the conductivity decreased with dilution?
(ii)[1]
If molar conductivity at infinite dilution ($\Lambda_m^\circ$) of $\text{KCl}$ is $150\cdot0\text{ S cm}^2\text{ mol}^{-1}$, calculate the degree of dissociation of $0\cdot01\text{ M KCl}$.
(iii)[1]
The conductivity of a $0\cdot01\text{ M}$ solution of acetic acid at $298\text{ K}$ is $1\cdot65 \times 10^{-4}\text{ S cm}^{-1}$. Calculate the molar conductivity of the solution.
Show answer

Answer (i)

Official answer key
Conductivity ($\kappa$) is the conductance of the ions in unit volume of solution; on dilution the number of ions per unit volume decreases, so $\kappa$ decreases. Molar conductivity $\Lambda_m = \kappa \times V_m$, where $V_m$ is the volume containing 1 mol of electrolyte; $V_m$ increases on dilution more than $\kappa$ falls, so $\Lambda_m$ increases.

Answer (ii)

Official answer key

Formula used: Degree of dissociation from molar conductivities: alpha = Lm/Lm0 with Lm = 141.0 S cm^2 mol^-1, Lm0 = 150.0 S cm^2 mol^-1, so alpha = 0.94

$\alpha = \Lambda_m^c/\Lambda_m^\circ = 141.0/150.0 = 0.94$, i.e. 94%.

Final answer: 0.94

Answer (iii)

Official answer key
$\Lambda_m = \dfrac{\kappa \times 1000}{\text{molarity}} = \dfrac{1.65\times10^{-4}\times1000}{0.01} = 16.5\ \mathrm{S\,cm^2\,mol^{-1}}$

Final answer: 16.5 S cm^2 mol^-1

3 marks · Short answerOpen: Answer the following: The molar conductivity at infinite dilution for λ°_H⁺ =…

Answer the following.

Answer the following:
(a)[1]
The molar conductivity at infinite dilution for $\lambda^\circ_{\text{H}^+} = 348\cdot65\text{ S cm}^2\text{mol}^{-1}$ and for $\lambda^\circ_{\text{CH}_3\text{COO}^-} = 41\cdot4\text{ S cm}^2\text{mol}^{-1}$ respectively. Calculate the degree of dissociation ($\alpha$) of acetic acid if its molar conductivity ($\Lambda_m$) is $40\cdot65\text{ S cm}^2\text{mol}^{-1}$.
(b)[1]
Compounds [A] and [B] are two electrolytes. Upon dilution, the molar conductivity of compound [A] increases 3 times while that of [B] increases 30 times. Which one of the two is a weak electrolyte? Why?
(c)[1]
Can copper sulphate solution be stored in a zinc pot? Give a reason for your answer by referring to the values given below: $E^\circ_{\text{Zn}^{2+}/\text{Zn}} = -0\cdot76\text{ V}, E^\circ_{\text{Cu}^{2+}/\text{Cu}} = +0\cdot34\text{ V}$
Show answer

Answer (a)

Formula: $\Lambda^\circ_m(\text{CH}_3\text{COOH}) = \lambda^\circ_{\text{H}^+} + \lambda^\circ_{\text{CH}_3\text{COO}^-}$ $\alpha = \frac{\Lambda_m}{\Lambda^\circ_m}$ Substitution: $\Lambda^\circ_m = 348\cdot65 + 41\cdot4 = 390\cdot05\text{ S cm}^2\text{mol}^{-1}$ $\alpha = \frac{40\cdot65\text{ S cm}^2\text{mol}^{-1}}{390\cdot05\text{ S cm}^2\text{mol}^{-1}} = 0\cdot1042\text{ (or } 10\cdot42\%\text{)}$

Final answer: 0.1042

Answer (b)

Compound [B] is the weak electrolyte. Reason: A weak electrolyte is only partially dissociated at normal concentrations. Upon dilution, its degree of dissociation ($\alpha$) increases significantly according to Ostwald's dilution law, leading to a large increase in the number of conducting ions and hence a steep increase in molar conductivity (30 times). In contrast, a strong electrolyte is already completely dissociated, and dilution causes only a modest increase in molar conductivity (3 times) due to reduced interionic attractions.

Answer (c)

No, copper sulphate solution cannot be stored in a zinc pot. Reason: $E^\circ_{\text{Zn}^{2+}/\text{Zn}} = -0\cdot76\text{ V}$ is more negative than $E^\circ_{\text{Cu}^{2+}/\text{Cu}} = +0\cdot34\text{ V}$, meaning zinc is more reactive and a stronger reducing agent than copper. Zinc spontaneously displaces copper from $\text{CuSO}_4$: $\text{Zn(s)} + \text{Cu}^{2+}\text{(aq)} \longrightarrow \text{Zn}^{2+}\text{(aq)} + \text{Cu(s)}$ Since $E^\circ_{\text{cell}} = +0\cdot34 - (-0\cdot76) = +1\cdot10\text{ V} > 0$, the reaction is thermodynamically spontaneous, and the zinc pot will dissolve.
3 marks · NumericalOpen: Answer the following: Ionic conductance at infinite dilution of Al³⁺ and SO₄²⁻…

Solve the following.

Answer the following:
(a)[1.5]
Ionic conductance at infinite dilution of $\text{Al}^{3+}$ and $\text{SO}_4^{2-}$ ions are $189\text{ ohm}^{-1}\text{cm}^2\text{mol}^{-1}$ and $160\text{ ohm}^{-1}\text{cm}^2\text{mol}^{-1}$ respectively. Calculate the molar conductance of $\text{Al}_2(\text{SO}_4)_3$ at infinite dilution.
(b)[1.5]
The resistance of $0\cdot1\text{ N}$ solution of an electrolyte in a conducting cell was found to be $15\text{ ohm}$. Calculate the following if the cell constant is $0\cdot367\text{ cm}^{-1}$. (1) Conductance (C) (2) Specific conductance ($\kappa$) (3) Equivalent conductance ($\Lambda_{\text{eq}}$)
Show answer

Answer (a)

$\Lambda^\circ_m[\mathrm{Al_2(SO_4)_3}] = 2\lambda^\circ(\mathrm{Al^{3+}}) + 3\lambda^\circ(\mathrm{SO_4^{2-}}) = 2(189) + 3(160) = 378 + 480 = 858$

Final answer: 858 ohm^-1 cm^2 mol^-1

Answer (b)

Formula used: Conductivity from resistance: kappa = Gstar/Rcell with Gstar = 0.367 cm^-1, Rcell = 15 ohm, so kappa = 0.02447 S cm^-1

(1) $C = \dfrac{1}{R} = \dfrac{1}{15} = 0.0667\ \mathrm{ohm^{-1}}$ (S) (2) $\kappa = G^* \times C = 0.367 \times 0.0667 = 0.0245\ \mathrm{ohm^{-1}\ cm^{-1}}$ (3) $\Lambda_{eq} = \dfrac{\kappa \times 1000}{N} = \dfrac{0.02447 \times 1000}{0.1} = 244.7\ \mathrm{ohm^{-1}\ cm^2\ eq^{-1}}$

Final answer: 244.7 S cm^2 eq^-1

3 marks · Case basedOpen: Kohlrausch observed an interesting pattern between the values of molar…

Answer the following.

Kohlrausch observed an interesting pattern between the values of molar conductance at infinite dilution ($\Lambda^\circ_m$) for strong electrolytes. It was observed that different pairs of electrolytes having a common cation or anion had almost same difference of $\Lambda^\circ_m$. On the basis of his observation, he postulated a law known as Kohlrausch’s Law of Independent Migration of ions. The values of molar conductivities at infinite dilution for some cations and anions are as follows:
Ion$\lambda^\circ_m (\text{S cm}^2\text{mol}^{-1})$
$\text{Ba}^{2+}$127.2
$\text{Cl}^-$76.3
$\text{Ca}^{2+}$119.0
$\text{SO}_4^{2-}$160.0
(i)[1]
State the Kohlrausch’s Law of Independent Migration of ions.
(ii)[1]
Calculate the molar conductance at infinite dilution $\Lambda^\circ_m$ for $\text{BaCl}_2$.
(iii)[1]
Arrange the values of $\Lambda^\circ_m$ for $\text{CaSO}_4$ and $\text{BaCl}_2$ in increasing order.
Show answer

Answer (i)

Kohlrausch's Law of Independent Migration of ions states that the limiting molar conductivity of an electrolyte can be represented as the sum of the individual contributions of the cation and the anion of the electrolyte: $\Lambda^\infty_m = \nu_+ \lambda^\infty_+ + \nu_- \lambda^\infty_-$ where $\nu_+$ and $\nu_-$ are the number of cations and anions per formula unit of the electrolyte.

Answer (ii)

According to Kohlrausch's law: $\Lambda^\infty_m(\text{BaCl}_2) = \lambda^\infty_m(\text{Ba}^{2+}) + 2 \lambda^\infty_m(\text{Cl}^-)$ Substituting the given values: $\Lambda^\infty_m(\text{BaCl}_2) = 127\cdot2\text{ S cm}^2\text{mol}^{-1} + 2 \times 76\cdot3\text{ S cm}^2\text{mol}^{-1}$ $= 127\cdot2 + 152\cdot6 = 279\cdot8\text{ S cm}^2\text{mol}^{-1}$

Final answer: 279.8 $\text{S cm}^{2} \text{mol}^{-1}$

Answer (iii)

$\Lambda^\infty_m(\text{CaSO}_4) = \lambda^\infty_m(\text{Ca}^{2+}) + \lambda^\infty_m(\text{SO}_4^{2-}) = 119\cdot0 + 160\cdot0 = 279\cdot0\text{ S cm}^2\text{mol}^{-1}$ $\Lambda^\infty_m(\text{BaCl}_2) = 279\cdot8\text{ S cm}^2\text{mol}^{-1}$ Increasing order: $\Lambda^\infty_m(\text{CaSO}_4) < \Lambda^\infty_m(\text{BaCl}_2)$ (or $279\cdot0\text{ S cm}^2\text{mol}^{-1} < 279\cdot8\text{ S cm}^2\text{mol}^{-1}$).
3 marks · Short answerOpen: Answer the following: When a current of 0·75 ampere is passed through a CuSO₄…

Answer the following.

Answer the following:
(a)[1]
When a current of $0\cdot75\text{ ampere}$ is passed through a $\text{CuSO}_4$ solution for $25\text{ minutes}$, $0\cdot370\text{ g}$ of copper is deposited. Calculate the atomic weight of copper by using the given information.
(b)[1]
Two metals A and B have standard reduction potential values, $-0\cdot76\text{ V}$ and $+0\cdot34\text{ V}$ respectively. Which of these metals will liberate $\text{H}_2$ gas from dil. $\text{H}_2\text{SO}_4$? Why?
(c)[1]
Why does the specific conductivity ($\kappa$) of a solution decrease on dilution?
Show answer

Answer (a)

Formula (Faraday's first law of electrolysis): $w = \frac{\text{Atomic weight} \times I \times t}{n \times F}$ $\text{Atomic weight} = \frac{w \times n \times F}{I \times t}$ For copper deposition from $\text{CuSO}_4$: $\text{Cu}^{2+} + 2e^- \longrightarrow \text{Cu} \quad (n = 2)$ $t = 25 \times 60 = 1500\text{ seconds}$ $F = 96,500\text{ C mol}^{-1}$ Substitution: $\text{Atomic weight} = \frac{0\cdot370\text{ g} \times 2 \times 96,500\text{ C mol}^{-1}}{0\cdot75\text{ A} \times 1500\text{ s}}$ $= \frac{71,410}{1125} = 63\cdot48\text{ g mol}^{-1}$

Final answer: 63.48 $\text{g mol}^{-1}$

Answer (b)

Metal A will liberate $\text{H}_2$ gas from dil. $\text{H}_2\text{SO}_4$. Reason: The standard reduction potential of hydrogen is $E^\circ_{\text{H}^+/\text{H}_2} = 0\cdot00\text{ V}$. Metal A has a negative reduction potential ($E^\circ = -0\cdot76\text{ V}$), which is lower than that of hydrogen, making it a stronger reducing agent capable of spontaneously reducing $\text{H}^+$ ions to $\text{H}_2$ gas ($E^\circ_{\text{cell}} = +0\cdot76\text{ V} > 0$). Metal B has a positive reduction potential ($+0\cdot34\text{ V}$), so it cannot reduce $\text{H}^+$ ions.

Answer (c)

Specific conductivity ($\kappa$) is the conductance of ions present in a unit volume ($1\text{ cm}^3$) of the solution. On dilution, although the total volume increases and the degree of dissociation may increase, the number of current-carrying ions per unit volume decreases, leading to a decrease in specific conductivity.
3 marks · NumericalOpen: Answer the following: Calculate the values of E_(cell) and Δ G for the…

Answer the following.

Answer the following:
(a)[2]
Calculate the values of $E_{\text{cell}}$ and $\Delta G$ for the following cell reaction at $25^\circ\text{C}$: $\text{Zn(s)} / \text{Zn}^{2+}(0\cdot0004\text{ M}) \parallel \text{Cd}^{2+}(0\cdot2\text{ M}) / \text{Cd(s)}$ (Given: $E^\circ(\text{Zn}^{2+}/\text{Zn}) = -0\cdot763\text{ V}$; $E^\circ(\text{Cd}^{2+}/\text{Cd}) = -0\cdot403\text{ V}$, $1\text{ Faraday} = 96,500\text{ coulombs}$, $R = 8\cdot314\text{ J K}^{-1}\text{ mol}^{-1}$)
(b)[1]
Calculate how long it will take to deposit $1\cdot0\text{ g}$ of chromium when a current of $1\cdot25\text{ ampere}$ flows through a solution of chromium (III) sulphate. (Atomic weight of $\text{Cr} = 52$, $1\text{ Faraday} = 96,500\text{ coulombs}$.)
Show answer

Answer (a)

Official answer key

Formulas used: Standard emf of a cell: E0cell = E0cathode - E0anode with E0anode = -0.763 V, E0cathode = -0.403 V, so E0cell = 0.36 V Nernst equation at temperature T: E = E0 - 2.303*R*T/(n*F)*log10(Q) with Q = 0.002, R = 8.314 J K^-1 mol^-1, T = 298 K, n = 2, E0 = 0.36 V, so E = 0.44 V Gibbs energy from emf: dG = -n*F*E with E = 0.44 V, F = 96500 C mol^-1, n = 2, so dG = -84920 J mol^-1

Cell reaction: $\mathrm{Zn + Cd^{2+} \rightarrow Zn^{2+} + Cd}$, $n = 2$ $E^\circ_{cell} = -0.403 - (-0.763) = 0.36\ \mathrm{V}$ $E_{cell} = 0.36 - \dfrac{0.059}{2}\log\dfrac{[\mathrm{Zn^{2+}}]}{[\mathrm{Cd^{2+}}]} = 0.36 - \dfrac{0.059}{2}\log\dfrac{0.0004}{0.2} = 0.36 + 0.08 = 0.44\ \mathrm{V}$ $\Delta G = -nFE = -2\times96500\times0.44 = -84920\ \mathrm{J} = -84.92\ \mathrm{kJ}$

Final answer: 0.44 V

Answer (b)

Official answer key

Formula used: Faraday's first law: w = M*Q/(n*F) with F = 96500 C mol^-1, I = 1.25 A, M = 52 g mol^-1, n = 3, w = 1.0 g, so t = 4453.8 s

$\mathrm{Cr^{3+} + 3e^- \rightarrow Cr}$: 52 g of Cr needs $3\times96500$ C, so 1.0 g needs $Q = \dfrac{3\times96500}{52} = 5567.3\ \mathrm{C}$ $t = \dfrac{Q}{I} = \dfrac{5567.3}{1.25} = 4453.8\ \mathrm{s}$

Final answer: 4453.8 s

2 marks · NumericalOpen: Calculate the value of Δ G° for the following cell at 25°C. Zn(s) / Zn²⁺(1M) ∥…

Solve the following.

Calculate the value of $\Delta G^\circ$ for the following cell at $25^\circ\text{C}$. $\text{Zn(s)} / \text{Zn}^{2+}(1\text{M}) \parallel \text{Sn}^{2+}(1\text{M}) / \text{Sn(s)}$ Given $E^\circ_{\text{Zn}^{2+}/\text{Zn}} = -0\cdot76\text{ V}, E^\circ_{\text{Sn}^{2+}/\text{Sn}} = -0\cdot14\text{ V}$ $1\text{ faraday} = 96,500\text{ coulombs}$
Show answer

Answer

Formula: $E^\circ_{\text{cell}} = E^\circ_{\text{cathode}} - E^\circ_{\text{anode}} = E^\circ_{\text{Sn}^{2+}/\text{Sn}} - E^\circ_{\text{Zn}^{2+}/\text{Zn}}$ $\Delta G^\circ = -n F E^\circ_{\text{cell}}$ Substitution: $E^\circ_{\text{cell}} = -0\cdot14\text{ V} - (-0\cdot76\text{ V}) = +0\cdot62\text{ V}$ Here, $n = 2$ electrons are transferred. $\Delta G^\circ = -2 \times 96,500\text{ C mol}^{-1} \times 0\cdot62\text{ V}$ $= -119,660\text{ J mol}^{-1} = -119\cdot66\text{ kJ mol}^{-1}$

Final answer: -119.66 $\text{kJ mol}^{-1}$

2 marks · NumericalOpen: Calculate the value of Δ G° for the following cell at 298 K: 2Cr(s) + 3Cd²⁺(1M)…

Solve the following.

Calculate the value of $\Delta G^\circ$ for the following cell at $298\text{ K}$: $2\text{Cr(s)} + 3\text{Cd}^{2+}(1\text{M}) \rightarrow 2\text{Cr}^{3+}(1\text{M}) + 3\text{Cd(s)}$ Given $E^\circ_{\text{Cr}^{3+}/\text{Cr}} = -0\cdot74\text{ V}$, $E^\circ_{\text{Cd}^{2+}/\text{Cd}} = -0\cdot40\text{ V}$ $1\text{ faraday} = 96,500\text{ coulombs}$
Show answer

Answer

Formulas used: Standard emf of a cell: E0cell = E0cathode - E0anode with E0anode = -0.74 V, E0cathode = -0.40 V, so E0cell = 0.34 V Gibbs energy from emf: dG = -n*F*E with E = 0.34 V, F = 96500 C mol^-1, n = 6.0, so dG = -196860 J mol^-1

Cathode (reduction): $\mathrm{Cd^{2+}/Cd}$; anode (oxidation): $\mathrm{Cr/Cr^{3+}}$. $E^\circ_{cell} = E^\circ_{cathode} - E^\circ_{anode} = -0.40 - (-0.74) = 0.34\ \mathrm{V}$ $n = 6$ (2 Cr lose 6 electrons) $\Delta G^\circ = -nFE^\circ_{cell} = -6 \times 96500 \times 0.34 = -196860\ \mathrm{J\ mol^{-1}}$

Final answer: -196.86 kJ mol^-1

3 marks · Short answerOpen: Answer the following: A 0·01 M solution of NaCl is diluted by adding water…

Answer the following.

Answer the following:
(a)[1]
A $0\cdot01\text{ M}$ solution of $\text{NaCl}$ is diluted by adding water. What will happen to its specific conductivity and molar conductivity?
(b)[1]
Is it safe to stir $1\text{M AgNO}_3$ solution with a copper spoon? Explain. (Given: $E^\circ(\text{Cu}^{2+}/\text{Cu}) = +0\cdot34\text{ V}$, $E^\circ(\text{Ag}^+/\text{Ag}) = +0\cdot80\text{ V})$
(c)[1]
Two metals A and B have standard reduction potential values $-2\cdot37\text{ V}$ and $+0\cdot80\text{ V}$ respectively. Which of these will liberate $\text{H}_2$ gas from dil. $\text{HCl}$?
Show answer

Answer (a)

Official answer key
On dilution the specific conductivity (conductivity) decreases, because fewer ions are present per unit volume, while the molar conductivity increases, because $\Lambda_m = \kappa \times V_m$ and $V_m$ rises.

Answer (b)

Official answer key

Equation: $\mathrm{Cu} + 2\mathrm{Ag}^{+} \longrightarrow \mathrm{Cu}^{2+} + 2\mathrm{Ag}$

Formula used: Standard emf of a cell: E0cell = E0cathode - E0anode with E0anode = 0.34 V, E0cathode = 0.80 V, so E0cell = 0.46 V

No, it is not safe. $E^\circ_{cell} = E^\circ_{cathode} - E^\circ_{anode} = 0.80 - 0.34 = +0.46\ \mathrm{V}$, which is positive, so copper displaces silver and dissolves in $\mathrm{AgNO_3}$ solution.

Answer (c)

Official answer key
Metal A ($E^\circ = -2.37\ \mathrm{V}$) liberates $\mathrm{H_2}$ from dil. HCl, because a metal with a lower (more negative) reduction potential than hydrogen ($0.00\ \mathrm{V}$) is oxidised by $\mathrm{H^+}$.
20252 questions
3 marks · NumericalOpen: Nandini wants to electroplate her bracelet with silver. She gives the bracelet…

Solve the following.

Nandini wants to electroplate her bracelet with silver. She gives the bracelet to an artist.
(a)[1.5]
After electroplating she gets the information that 1.6117g of the metal is deposited when electric current of 0.2 ampere is passed for 2 hours. How will she make the confirmation that the metal deposited is silver by using the data?
(b)[1.5]
Which law is applicable to solve the problem?
Show answer

Answer (a)

Official answer key
$w = ZIt$ $1.6117=\frac{\text{At. mass}}{\text{Valency}\times 96500}\times 0.2\times 3600\times 2$ $1.6117=\frac{\text{At. mass}}{1\times 96500}\times 0.2\times 3600\times 2$ Atomic mass = 108 g The deposited metal is silver.

Final answer: 108 g

Answer (b)

Official answer key
Faraday's first law of electrolysis.
3 marks · Short answerOpen: Answer the following: What happens to the voltage when the salt bridge is…

Answer the following.

Answer the following:
(a)[1]
What happens to the voltage when the salt bridge is removed from the two half cells and why?
(b)[1]
Copper sulphate solution cannot be stored in a zinc pot. Why?
(c)[1]
Why does the density of $\text{H}_2\text{SO}_4$ in a lead storage battery decrease as it is discharged?
Show answer

Answer (a)

Official answer key
The voltage drops to zero, as current will stop flowing in the circuit of the cell.

Answer (b)

Official answer key
No, zinc is placed above copper in electrochemical series.

Answer (c)

Official answer key
During discharge (use) of the battery $\mathrm{H_2SO_4}$ is used up, as a result density decreases.

About Electrochemistry

Electrochemistry is a unit of the ISC Class 12 Chemistry syllabus. The syllabus gives 25 of the 70 theory marks to Physical Chemistry: Solutions, Electrochemistry, Chemical Kinetics together.

The syllabus lists these topics: Electrochemical cells, Galvanic cells, Measurement of potential, Standard hydrogen electrode, Standard electrode potential, Cell notation, Electrochemical series, Nernst equation, Metallic conductance and electrolytic conductance, Cell constant, Kohlrausch's Law, Faraday's laws of Electrolysis, Batteries and Corrosion.

Prashnika has 87 past-paper questions on Electrochemistry, from papers of 2018-2027, asked in 9 different years. By kind: Numerical (35), Short answer (16), MCQ (11) and Case based (9). They carry between 1 and 5 marks, and most are worth 1 mark.

To practise, use the Chemistry numericals calculator and the paper generator, which can build a practice paper from this chapter.

Common questions

What topics are in Electrochemistry in ISC Class 12 Chemistry?

The syllabus lists Electrochemical cells, Galvanic cells, Measurement of potential, Standard hydrogen electrode, Standard electrode potential, Cell notation, Electrochemical series, Nernst equation, Metallic conductance and electrolytic conductance, Cell constant, Kohlrausch's Law, Faraday's laws of Electrolysis, Batteries and Corrosion.

How many questions on Electrochemistry are in ISC Class 12 Chemistry past papers?

Prashnika has 87 questions on Electrochemistry, from papers of 2018-2027 (board, specimen, improvement and practice papers together).

What kinds of questions are asked on Electrochemistry?

By kind: Numerical (35), Short answer (16), MCQ (11) and Case based (9).

Questions on other pages on Electrochemistry