Prashnikaप्रश्निका
Code
About
ChemistryBoardClass 12

ISC Chemistry 2019 Question Paper with Answers

The ISC Chemistry 2019 Question Paper for Class 12: all 48 questions, 70 marks in all, in printed order and in full. It is free to download: tap "Show answer" under a question to see its answer, or use the download button to save the questions as a PDF, with or without answers; "Print this paper" below prints it as it was set.

48questions
70marks
20chapters
Q1(a)(i)1 mark · Fill inOpen: The elevation of boiling point of 0·5 M K₂SO₄ solution is ___________ that of…

Fill in the blank with the correct word.

The elevation of boiling point of $0\cdot5\text{ M K}_2\text{SO}_4$ solution is ___________ that of $0\cdot5\text{ M}$ urea solution. The elevation of boiling point of $0\cdot5\text{ M KCl}$ solution is __________ that of $0\cdot5\text{ M K}_2\text{SO}_4$ solution.
Show answer

Answer

Blanks: more than; less than

more than; less than. Boiling point elevation depends on the number of particles: $\mathrm{K_2SO_4}$ gives 3 ions ($i=3$), urea 1 ($i=1$), KCl 2 ions ($i=2$).
Q1(a)(ii)1 mark · Fill inOpen: A mixture of conc. HCl and anhydrous ZnCl₂ is called __________ which shows…

Fill in the blank with the correct word.

A mixture of conc. $\text{HCl}$ and anhydrous $\text{ZnCl}_2$ is called __________ which shows maximum reactivity with _________ alcohol.
Show answer

Answer

Blanks: Lucas reagent; tertiary

Lucas reagent; tertiary. A mixture of conc. $\mathrm{HCl}$ and anhydrous $\mathrm{ZnCl_2}$ reacts fastest with tertiary alcohols because they form the most stable carbocation.
Q1(a)(iv)1 mark · Fill inOpen: When the concentration of a reactant of first order reaction is doubled, the…

Fill in the blank with the correct word.

When the concentration of a reactant of first order reaction is doubled, the rate of reaction becomes _________ times, but for a __________ order reaction, the rate of reaction remains the same.
Show answer

Answer

Blanks: two; zero

two; zero. For a first order reaction rate $\propto [A]$, so doubling the concentration doubles the rate; for a zero order reaction the rate is independent of concentration.
Q1(b)(i)1 mark · MCQOpen: The cell reaction is spontaneous or feasible when emf of the cell is:

Choose the correct option.

The cell reaction is spontaneous or feasible when emf of the cell is:
  • (1)negative
  • (2)positive
  • (3)zero
  • (4)either positive or negative
Show answer

Answer

Correct option: (2)

Answer: (2) positive Since $\Delta G = -nFE_{cell}$, a positive emf makes $\Delta G$ negative, so the reaction is spontaneous.
Q1(b)(ii)1 mark · MCQOpen: Which, among the following polymers, is a polyester:

Choose the correct option.

Which, among the following polymers, is a polyester:
  • (1)melamine
  • (2)bakelite
  • (3)terylene
  • (4)polythene
Show answer

Answer

Correct option: (3)

Answer: (3) terylene Terylene (Dacron) is formed from ethylene glycol and terephthalic acid and contains ester linkages.
Q1(b)(iii)1 mark · MCQOpen: The correct order of increasing acidic strength of the oxoacids of chlorine is:

Choose the correct option.

The correct order of increasing acidic strength of the oxoacids of chlorine is:
  • (1)$\text{HClO}_3 < \text{HClO}_4 < \text{HClO}_2 < \text{HClO}$
  • (2)$\text{HClO} < \text{HClO}_2 < \text{HClO}_3 < \text{HClO}_4$
  • (3)$\text{HClO}_2 < \text{HClO} < \text{HClO}_4 < \text{HClO}_3$
  • (4)$\text{HClO}_3 < \text{HClO}_4 < \text{HClO} < \text{HClO}_2$
Show answer

Answer

Correct option: (2)

Answer: (2) $\mathrm{HClO} < \mathrm{HClO_2} < \mathrm{HClO_3} < \mathrm{HClO_4}$ Acidic strength increases with the number of oxygen atoms, as the conjugate base becomes more stable by resonance.
Q1(b)(iv)1 mark · MCQOpen: A catalyst is a substance which:

Choose the correct option.

A catalyst is a substance which:
  • (1)changes the equilibrium constant of the reaction.
  • (2)increases the equilibrium constant of the reaction.
  • (3)supplies energy to the reaction.
  • (4)shortens the time to reach equilibrium.
Show answer

Answer

Correct option: (4)

Answer: (4) shortens the time to reach equilibrium. A catalyst speeds up both forward and backward reactions equally, so it does not change the equilibrium constant.
Q1(c)4 marks · MatchOpen: Question

Match the following.

Column A
  • (i)Diazotisation
  • (ii)Crystalline solid
  • (iii)Phenol
  • (iv)Fittig reaction
Column B
  • (a)Anisotropic
  • (b)Reimer-Tiemann reaction
  • (c)Diphenyl
  • (d)Aniline
Show answer

Answer

Pairs: (i) → (d), (ii) → (a), (iii) → (b), (iv) → (c)

(i) - (d); (ii) - (a); (iii) - (b); (iv) - (c)
Q1(d)(i)(1)1 mark · Short answerOpen: Which trivalent ion has maximum size in the Lanthanoid series i.e. Lanthanum…

Answer the following.

Which trivalent ion has maximum size in the Lanthanoid series i.e. Lanthanum ion ($\text{La}^{3+}$) to Lutetium ion ($\text{Lu}^{3+}$)? (at. no. of Lanthanum = 57 and Lutetium = 71)
Show answer

Answer

$\mathrm{La^{3+}}$ has the maximum size, because of the lanthanoid contraction: the ionic radius decreases steadily from $\mathrm{La^{3+}}$ to $\mathrm{Lu^{3+}}$ as the poorly shielding 4f electrons let the nuclear charge increase.
Q1(d)(ii)2 marks · Coordination complexOpen: When a coordination compound CoCl₃· 6NH₃ is mixed with AgNO₃, three moles of…

Answer the following.

When a coordination compound $\text{CoCl}_3\cdot 6\text{NH}_3$ is mixed with $\text{AgNO}_3$, three moles of $\text{AgCl}$ are precipitated per mole of the compound. Write the structural formula and IUPAC name of the coordination compound.
Show answer

Answer

IUPAC namehexaamminecobalt(III) chloride
Formula[Co(NH3)6]Cl3
Three moles of AgCl mean all three chloride ions are ionisable, so all six $\mathrm{NH_3}$ are in the coordination sphere: $[\mathrm{Co(NH_3)_6}]\mathrm{Cl_3}$.
Q1(d)(iii)2 marks · NumericalOpen: Calculate the boiling point of urea solution when 6 g of urea is dissolved in…

Answer the following.

Calculate the boiling point of urea solution when $6\text{ g}$ of urea is dissolved in $200\text{ g}$ of water. ($K_b\text{ for water} = 0\cdot52\text{ K kg mol}^{-1}$, boiling point of pure water = $373\text{ K}$, mol. wt. of urea = $60$)
Show answer

Answer

Formulas used: Molality: m = w2/(M2*w1) with M2 = 60 g mol^-1, w1 = 200 g, w2 = 6 g, so m = 0.5 mol kg^-1 Elevation of boiling point: dTb = i*Kb*m with m = 0.5 mol kg^-1, Kb = 0.52 K kg mol^-1, so dTb = 0.26 K

Formula: $\Delta T_b = K_b \times m$, where $m = \dfrac{w_2 \times 1000}{M_2 \times w_1}$ $m = \dfrac{6\text{ g}}{60\text{ g mol}^{-1} \times 0\cdot2\text{ kg}} = 0\cdot5\text{ mol kg}^{-1}$ $\Delta T_b = 0\cdot52\text{ K kg mol}^{-1} \times 0\cdot5\text{ mol kg}^{-1} = 0\cdot26\text{ K}$ $T_b = 373 + 0\cdot26 = 373\cdot26\text{ K}$

Final answer: 373.26 K

Q1(d)(iv)2 marks · IdentifyOpen: Identify the compounds A, B, C and D in the given reaction: HC ≡ CH…

Answer the following.

Identify the compounds A, B, C and D in the given reaction: $\text{HC} \equiv \text{CH} \xrightarrow[\text{Hg}^{2+}/\text{H}_2\text{SO}_4]{\text{H}_2\text{O}} \text{A} \xrightarrow[\text{K}_2\text{Cr}_2\text{O}_7 + \text{H}_2\text{SO}_4]{[\text{O}]} \text{B} \xrightarrow{\text{Ca(OH)}_2} \text{C} \xrightarrow[\text{dry distillation}]{\text{heat}} \text{D}$
Show answer

Answer

A - ethanal: CH3CHO

B - ethanoic acid: CH3COOH

C - calcium ethanoate: (CH3COO)2Ca

D - propanone: CH3COCH3

A = ethanal ($\mathrm{CH_3CHO}$) B = ethanoic acid ($\mathrm{CH_3COOH}$) C = calcium ethanoate ($\mathrm{(CH_3COO)_2Ca}$) D = propanone ($\mathrm{CH_3COCH_3}$)
Q2(a)2 marks · NumericalOpen: For the reaction A + B → C + D, the initial rate for different reactions and…

Solve the following.

For the reaction $\text{A} + \text{B} \rightarrow \text{C} + \text{D}$, the initial rate for different reactions and initial concentration of reactants are given below:
S. No.Initial Conc. [A] ($\text{mole L}^{-1}$)Initial Conc. [B] ($\text{mole L}^{-1}$)Initial rate ($\text{mole L}^{-1}\text{ sec}^{-1}$)
11·01·0$2 \times 10^{-3}$
22·01·0$4 \times 10^{-3}$
34·01·0$8 \times 10^{-3}$
41·02·0$2 \times 10^{-3}$
51·04·0$2 \times 10^{-3}$
(i) What is the overall order of reaction? (ii) Write the rate law equation.
Show answer

Answer

Orders: A: 1.0, B: 0.0, overall: 1.0

Rate law: rate = k[A]

Rate constant: k = 2e-3 s^-1

Comparing experiments 1, 2 and 3: doubling [A] doubles the rate, so the order with respect to A is 1. Comparing 1, 4 and 5: changing [B] does not change the rate, so the order with respect to B is 0. (i) Overall order = 1 + 0 = 1 (ii) Rate law: rate $= k[\mathrm{A}]$, with $k = \dfrac{2\times10^{-3}\text{ mol L}^{-1}\text{ s}^{-1}}{1\cdot0\text{ mol L}^{-1}} = 2\times10^{-3}\text{ s}^{-1}$

Final answer: 1

Q2(b)2 marks · NumericalOpen: 25% of a first order reaction is completed in 30 minutes. Calculate the time…

Solve the following.

$25\%$ of a first order reaction is completed in $30\text{ minutes}$. Calculate the time taken in minutes for the reaction to go to $90\%$ completion.
Show answer

Answer

Formulas used: First-order integrated rate law: k = 2.303/t*log10(A0/A) with A = 75, t = 30 min, A0 = 100, so k = 0.00959 min^-1 First-order integrated rate law: k = 2.303/t*log10(A0/A) with A = 10, k = 0.00959 min^-1, A0 = 100, so t = 240 min

Formula: $k = \dfrac{2\cdot303}{t}\log\dfrac{[\mathrm{A}]_0}{[\mathrm{A}]}$ For $25\%$ completion in $30\text{ min}$: $[\mathrm{A}]_0 = 100$, $[\mathrm{A}] = 75$ $k = \dfrac{2\cdot303}{30\text{ min}}\log\dfrac{100}{75} = 9\cdot59\times10^{-3}\text{ min}^{-1}$ For $90\%$ completion: $[\mathrm{A}] = 10$ $t = \dfrac{2\cdot303}{9\cdot59\times10^{-3}\text{ min}^{-1}}\log\dfrac{100}{10} = 240\text{ min}$

Final answer: 240 min

Q3(ii)1 mark · Short answerOpen: What are tranquilizers? Give one example of a tranquilizer.

Answer the following.

What are tranquilizers? Give one example of a tranquilizer.
Show answer

Answer

Tranquilizers are drugs used for treatment of stress and mild or severe mental diseases (they act on the central nervous system to relieve anxiety). Example: equanil (meprobamate).
Q4(i)1 mark · ReactionOpen: Chlorobenzene treated with ammonia in the presence of Cu₂O at 475 K and 60 atm.

Write the chemical equation for the following.

Chlorobenzene treated with ammonia in the presence of $\text{Cu}_2\text{O}$ at $475\text{ K}$ and $60\text{ atm}$.
Show answer

Answer

Equation: $\mathrm{C_{6}H_{5}Cl} + 2\mathrm{NH_{3}} \xrightarrow{\mathrm{Cu_{2}O}\text{,}\text{ }\text{475}\text{ }\text{K}\text{,}\text{ }\text{60}\text{ }\text{atm}} \mathrm{C_{6}H_{5}NH_{2}} + \mathrm{NH_{4}Cl}$

Product: aniline

Chlorobenzene undergoes ammonolysis to give aniline.
Q4(ii)1 mark · ReactionOpen: Ethyl chloride treated with alcoholic potassium hydroxide.

Write the chemical equation for the following.

Ethyl chloride treated with alcoholic potassium hydroxide.
Show answer

Answer

Equation: $\mathrm{C_{2}H_{5}Cl} + \mathrm{KOH} \xrightarrow{\text{alcoholic}\text{ }\text{KOH}\text{,}\text{ }\text{heat}} \mathrm{C_{2}H_{4}} + \mathrm{KCl} + \mathrm{H_{2}O}$

Product: ethene

Ethyl chloride undergoes dehydrohalogenation (elimination) to give ethene.
Q5(ii)1 mark · Short answerOpen: Name the monomers of nylon 6, 6.

Answer the following.

Name the monomers of nylon 6, 6.
Show answer

Answer

Hexane-1,6-dioic acid (adipic acid) and hexane-1,6-diamine (hexamethylenediamine).
Q7(a)2 marks · ConversionOpen: Benzene from phenol. Iodoform from ethanol.

How will you bring about the following conversion?

(i)[1]
Benzene from phenol.
(ii)[1]
Iodoform from ethanol.
Show answer

Answer (i)

Equation: $\mathrm{C_{6}H_{5}OH} + \mathrm{Zn} \xrightarrow{\text{heat}} \mathrm{C_{6}H_{6}} + \mathrm{ZnO}$

Phenol is distilled with zinc dust to give benzene.

Answer (ii)

Equation: $\mathrm{CH_{3}CH_{2}OH} + 4\mathrm{I_{2}} + 6\mathrm{NaOH} \xrightarrow{\text{warm}} \mathrm{CHI_{3}} + \mathrm{HCOONa} + 5\mathrm{NaI} + 5\mathrm{H_{2}O}$

Ethanol is warmed with iodine and sodium hydroxide (iodoform reaction) to give iodoform.
Q7(b)2 marks · ConversionOpen: Salicylaldehyde from phenol. Propan–2–ol from Grignard’s reagent.

How will you bring about the following conversion?

(i)[1]
Salicylaldehyde from phenol.
(ii)[1]
Propan–2–ol from Grignard’s reagent.
Show answer

Answer (i)

Equation: $\mathrm{C_{6}H_{5}OH} + \mathrm{CHCl_{3}} + 3\mathrm{NaOH} \xrightarrow{\text{Reimer-Tiemann}\text{ }\text{reaction}\text{,}\text{ }\text{aq.}\text{ }\text{NaOH}\text{,}\text{ }\text{340}\text{ }\text{K}} \mathrm{C_{6}H_{4}(OH)CHO} + 3\mathrm{NaCl} + 2\mathrm{H_{2}O}$

Reimer-Tiemann reaction: phenol is heated with chloroform and aqueous NaOH, then acidified.

Answer (ii)

Equations: $\mathrm{CH_{3}MgI} + \mathrm{CH_{3}CHO} \xrightarrow{\text{dry}\text{ }\text{ether}} \mathrm{CH_{3}CH(OMgI)CH_{3}}$ $\mathrm{CH_{3}CH(OMgI)CH_{3}} + \mathrm{H_{2}O} \xrightarrow{\text{hydrolysis}} \mathrm{CH_{3}CH(OH)CH_{3}} + \mathrm{Mg(OH)I}$

Methylmagnesium iodide adds to ethanal to give an adduct, which is hydrolysed to propan-2-ol.
Q82 marks · DerivationOpen: Show that for a first order reaction the time required to complete 75% of…

Derive the following.

Show that for a first order reaction the time required to complete $75\%$ of reaction is about $2$ times more than that required to complete $50\%$ of the reaction.

To show: time for 75% completion is about 2 times the time for 50% completion

Show answer

Answer

For a first order reaction $t = \dfrac{2\cdot303}{k}\log\dfrac{[\mathrm{A}]_0}{[\mathrm{A}]}$, so $t_{75\%} \approx 2\,t_{50\%}$.
  1. For a first order reaction, by the integrated rate law: $t = \dfrac{2\cdot303}{k}\log\dfrac{[\mathrm{A}]_0}{[\mathrm{A}]}$
  2. For $75\%$ completion, $[\mathrm{A}] = 25$ when $[\mathrm{A}]_0 = 100$: $t_{75\%} = \dfrac{2\cdot303}{k}\log 4 = \dfrac{2\cdot303 \times 0\cdot6021}{k} = \dfrac{1\cdot386}{k}$
  3. For $50\%$ completion, $[\mathrm{A}] = 50$: $t_{50\%} = \dfrac{2\cdot303}{k}\log 2 = \dfrac{2\cdot303 \times 0\cdot3010}{k} = \dfrac{0\cdot693}{k}$
  4. Dividing: $\dfrac{t_{75\%}}{t_{50\%}} = \dfrac{1\cdot386}{0\cdot693} = 2$
  5. Hence the time required for $75\%$ completion is about 2 times that required for $50\%$ completion.
Q9(a)3 marks · NumericalOpen: When 0·4 g of acetic acid is dissolved in 40 g of benzene, the freezing point…

Solve the following.

When $0\cdot4\text{ g}$ of acetic acid is dissolved in $40\text{ g}$ of benzene, the freezing point of the solution is lowered by $0\cdot45\text{ K}$. Calculate the degree of association of acetic acid. Acetic acid forms dimer when dissolved in benzene. ($K_f\text{ for benzene} = 5\cdot12\text{ K kg mol}^{-1}, \text{at. wt. C} = 12, \text{H} = 1, \text{O} = 16$)
Show answer

Answer

Formulas used: Depression of freezing point: dTf = i*Kf*m with i = 1, Kf = 5.12 K kg mol^-1, w1 = 40 g, w2 = 0.4 g, dTf = 0.45 K, so M2 = 113.8 g mol^-1 van 't Hoff factor from molar masses: i = M_normal/M_observed with M_normal = 60 g mol^-1, M_observed = 113.8 g mol^-1, so i = 0.527 Degree of association from i: alpha = (1 - i)/(1 - 1/nu) with i = 0.527, nu = 2, so alpha = 0.945

(The paper prints "oxalic acetic acid"; the question is about acetic acid, $\mathrm{CH_3COOH}$, $M = 60\text{ g mol}^{-1}$.) Observed molar mass: $M_{obs} = \frac{K_f \times w_2 \times 1000}{\Delta T_f \times w_1} = \frac{5.12 \times 0.4 \times 1000}{0.45 \times 40} = 113.8\text{ g mol}^{-1}$ $i = \frac{M_{normal}}{M_{obs}} = \frac{60}{113.8} = 0.527$ For dimerisation $2\mathrm{CH_3COOH} \rightleftharpoons (\mathrm{CH_3COOH})_2$: $i = 1 - \frac{\alpha}{2}$ $\alpha = 2(1 - 0.527) = 0.945$

Final answer: 0.945

Q9(b)3 marks · NumericalOpen: A solution is prepared by dissolving 9·25 g of non-volatile solute in 450 ml of…

Solve the following.

A solution is prepared by dissolving $9\cdot25\text{ g}$ of non-volatile solute in $450\text{ ml}$ of water. It has an osmotic pressure of $350\text{ mm of Hg}$ at $27^\circ\text{C}$. Assuming the solute is non-electrolyte, determine its molecular mass. ($R = 0\cdot0821\text{ lit atm K}^{-1}\text{mol}^{-1}$)
Show answer

Answer

Formula used: Osmotic pressure: pi = i*C*R*T with R = 0.0821 L atm K^-1 mol^-1, T = 300 K, V = 0.45 L, i = 1, pi = 0.4605 atm, w2 = 9.25 g, so M2 = 1099 g mol^-1

Formula: $\Pi V = \dfrac{w}{M}RT$, so $M = \dfrac{wRT}{\Pi V}$ $\Pi = \dfrac{350}{760}\text{ atm} = 0\cdot4605\text{ atm}$, $T = 27 + 273 = 300\text{ K}$, $V = 0\cdot45\text{ L}$ $M = \dfrac{9\cdot25\text{ g} \times 0\cdot0821\text{ L atm K}^{-1}\text{mol}^{-1} \times 300\text{ K}}{0\cdot4605\text{ atm} \times 0\cdot45\text{ L}} = 1099\text{ g mol}^{-1}$

Final answer: 1099 g mol^-1

Q103 marks · NumericalOpen: An element occurs in body centered cubic structure. Its density is 8·0 g/cm³…

Solve the following.

An element occurs in body centered cubic structure. Its density is $8\cdot0\text{ g/cm}^3$. If the cell edge is $250\text{ pm}$, calculate the atomic mass of an atom of this element. ($N_A = 6\cdot023 \times 10^{23}$)
Show answer

Answer

Formula used: Density of a unit cell: rho = z*M/(a**3*NA) with a = 2.5e-8 cm, z = 2, NA = 6.023e23 mol^-1, rho = 8.0 g cm^-3, so M = 37.64 g mol^-1

Formula: $\rho = \dfrac{Z \times M}{a^3 \times N_A}$, so $M = \dfrac{\rho a^3 N_A}{Z}$; for bcc, $Z = 2$ $a = 250\text{ pm} = 2\cdot5\times10^{-8}\text{ cm}$, $a^3 = 1\cdot5625\times10^{-23}\text{ cm}^3$ $M = \dfrac{8\cdot0\text{ g cm}^{-3} \times 1\cdot5625\times10^{-23}\text{ cm}^3 \times 6\cdot023\times10^{23}\text{ mol}^{-1}}{2} = 37\cdot64\text{ g mol}^{-1}$

Final answer: 37.64 g mol^-1

Q11(ii)1 mark · Short answerOpen: NaCN in the extraction of silver from a silver ore.

Answer the following.

NaCN in the extraction of silver from a silver ore.
Show answer

Answer

Equation: $\mathrm{Ag_{2}S} + 4\mathrm{NaCN} \xrightarrow{\text{air}} 2\mathrm{Na[Ag(CN)_{2}]} + \mathrm{Na_{2}S}$

NaCN is the leaching agent: it dissolves silver from the ore as the soluble complex sodium dicyanidoargentate(I), $\mathrm{Na[Ag(CN)_2]}$, which is later reduced by zinc.
Q11(iii)1 mark · Short answerOpen: Coke in the extraction of iron from its oxides.

Answer the following.

Coke in the extraction of iron from its oxides.
Show answer

Answer

Coke acts as the reducing agent (as carbon monoxide) that reduces iron oxides to iron, and as a fuel that supplies the heat.
Q12(i)1 mark · Short answerOpen: Write the IUPAC names of the following: K₃[Fe(C₂O₄)₃] [Co(NH₃)₅Cl]SO₄

Answer the following about the coordination compound.

Write the IUPAC names of the following:
(1)[0.5]
$\text{K}_3[\text{Fe}(\text{C}_2\text{O}_4)_3]$
(2)[0.5]
$[\text{Co}(\text{NH}_3)_5\text{Cl}]\text{SO}_4$
Show answer

Answer (1)

IUPAC namepotassium trioxalatoferrate(III)
Three oxalate ligands, oxidation state of iron $+3$.

Answer (2)

IUPAC namepentaamminechloridocobalt(III) sulphate
Five ammine ligands and one chlorido ligand, oxidation state of cobalt $+3$.
Q12(ii)2 marks · Coordination complexOpen: [Fe(CN)₆]⁴⁻ is a coordination complex ion. (1) Calculate the oxidation number…

Answer the following about the coordination compound.

$[\text{Fe}(\text{CN})_6]^{4-}$ is a coordination complex ion. (1) Calculate the oxidation number of iron in the complex. (2) Is the complex ion diamagnetic or paramagnetic? (3) What is the hybridisation state of the central metal atom? (4) Write the IUPAC name of the complex ion.
Show answer

Answer

IUPAC namehexacyanidoferrate(II)
Oxidation state2
Hybridisationd2sp3
Magnetic behaviourdiamagnetic
(1) $x + 6(-1) = -4$, so iron is $+2$ ($3d^6$). (2) $\mathrm{CN^-}$ is a strong field ligand, so the electrons pair up: no unpaired electrons, diamagnetic. (3) $\mathrm{d^2sp^3}$ (inner orbital, octahedral). (4) Hexacyanidoferrate(II) ion.
Q13(a)3 marks · Short answerOpen: Explain why: Transition elements form alloys. Zn²⁺ salts are white whereas Cu²⁺…

Answer the following.

Explain why:
(i)[1]
Transition elements form alloys.
(ii)[1]
$\text{Zn}^{2+}$ salts are white whereas $\text{Cu}^{2+}$ salts are coloured.
(iii)[1]
Transition metals and their compounds act as catalyst.
Show answer

Answer (i)

Because transition metals have similar atomic sizes, their atoms can replace one another in the metallic crystal lattice to form alloys.

Answer (ii)

Because $\mathrm{Zn^{2+}}$ ($3d^{10}$) has no unpaired electrons (no d-d transition), it is white, whereas $\mathrm{Cu^{2+}}$ ($3d^9$) has one unpaired electron and shows d-d transitions, so it is coloured.

Answer (iii)

Because of their variable oxidation states and ability to form intermediate compounds, and because their surfaces provide a large area for adsorption of reactants, transition metals act as catalysts.
Q13(b)3 marks · CompleteOpen: Complete and balance the following chemical equations. KMnO₄ + H₂SO₄ + H₂C₂O₄ →…

Answer the following.

Complete and balance the following chemical equations.
(i)[1]
$\text{KMnO}_4 + \text{H}_2\text{SO}_4 + \text{H}_2\text{C}_2\text{O}_4 \rightarrow$ ______ + ______ + ______ + ______
(ii)[1]
$\text{K}_2\text{Cr}_2\text{O}_7 + \text{H}_2\text{SO}_4 + \text{KI} \rightarrow$ ______ + ______ + ______ + ______
(iii)[1]
$\text{K}_2\text{Cr}_2\text{O}_7 + \text{H}_2\text{SO}_4 + \text{FeSO}_4 \rightarrow$ ______ + ______ + ______ + ______
Show answer

Answer (i)

Equation: $2\mathrm{KMnO_{4}} + 3\mathrm{H_{2}SO_{4}} + 5\mathrm{H_{2}C_{2}O_{4}} \xrightarrow{\text{warm}} \mathrm{K_{2}SO_{4}} + 2\mathrm{MnSO_{4}} + 10\mathrm{CO_{2}} + 8\mathrm{H_{2}O}$

Potassium permanganate oxidises oxalic acid to carbon dioxide in acidic medium.

Answer (ii)

Equation: $\mathrm{K_{2}Cr_{2}O_{7}} + 7\mathrm{H_{2}SO_{4}} + 6\mathrm{KI} \longrightarrow 4\mathrm{K_{2}SO_{4}} + \mathrm{Cr_{2}(SO_{4})_{3}} + 3\mathrm{I_{2}} + 7\mathrm{H_{2}O}$

Acidified potassium dichromate oxidises iodide to iodine.

Answer (iii)

Equation: $\mathrm{K_{2}Cr_{2}O_{7}} + 7\mathrm{H_{2}SO_{4}} + 6\mathrm{FeSO_{4}} \longrightarrow \mathrm{K_{2}SO_{4}} + \mathrm{Cr_{2}(SO_{4})_{3}} + 3\mathrm{Fe_{2}(SO_{4})_{3}} + 7\mathrm{H_{2}O}$

Acidified potassium dichromate oxidises iron(II) sulphate to iron(III) sulphate.
Q14(i)1 mark · ReactionOpen: Aniline is treated with bromine water.

Write the chemical equation for the following.

Aniline is treated with bromine water.
Show answer

Answer

Equation: $\mathrm{C_{6}H_{5}NH_{2}} + 3\mathrm{Br_{2}} \xrightarrow{\text{bromine}\text{ }\text{water}} \mathrm{C_{6}H_{2}Br_{3}NH_{2}} + 3\mathrm{HBr}$

Product: 2,4,6-tribromoaniline

Aniline reacts with bromine water at room temperature to give a white precipitate of 2,4,6-tribromoaniline.
Q14(ii)1 mark · ReactionOpen: Ethylamine is heated with chloroform and alcoholic solution of potassium…

Write the chemical equation for the following.

Ethylamine is heated with chloroform and alcoholic solution of potassium hydroxide.
Show answer

Answer

Equation: $\mathrm{C_{2}H_{5}NH_{2}} + \mathrm{CHCl_{3}} + 3\mathrm{KOH} \xrightarrow{\text{alcoholic}\text{ }\text{KOH}\text{,}\text{ }\text{heat}} \mathrm{C_{2}H_{5}NC} + 3\mathrm{KCl} + 3\mathrm{H_{2}O}$

Reaction: Carbylamine reaction

Product: ethyl isocyanide (ethyl carbylamine)

Ethylamine (a primary amine) gives ethyl isocyanide, a foul-smelling compound, in the carbylamine reaction.
Q14(iii)1 mark · ReactionOpen: Benzene diazonium chloride is treated with ice cold solution of aniline in…

Write the chemical equation for the following.

Benzene diazonium chloride is treated with ice cold solution of aniline in acidic medium.
Show answer

Answer

Equation: $\mathrm{C_{6}H_{5}N_{2}Cl} + \mathrm{C_{6}H_{5}NH_{2}} \xrightarrow{\text{acidic}\text{ }\text{medium}\text{,}\text{ }\text{273-278}\text{ }\text{K}} \mathrm{C_{6}H_{5}N=NC_{6}H_{4}NH_{2}} + \mathrm{HCl}$

Reaction: Coupling reaction

Product: 4-aminoazobenzene (p-aminoazobenzene)

Benzene diazonium chloride couples with aniline at the para position to give the yellow dye p-aminoazobenzene.
Q15(i)1 mark · Short answerOpen: Peptisation

Define the following terms with examples.

Peptisation
Show answer

Answer

Peptisation is the process of converting a freshly prepared precipitate into a colloidal sol by shaking it with a small amount of a suitable electrolyte (peptising agent).
Q15(ii)1 mark · Short answerOpen: Electrophoresis

Define the following terms with examples.

Electrophoresis
Show answer

Answer

Electrophoresis is the movement of colloidal particles towards the oppositely charged electrode under the influence of an electric field.
Q15(iii)1 mark · Short answerOpen: Dialysis

Define the following terms with examples.

Dialysis
Show answer

Answer

Dialysis is the process of separating colloidal particles from dissolved crystalloids (ions or small molecules) by diffusion through a semi-permeable membrane.
Q16(a)5 marks · NumericalOpen: Calculate the mass of silver deposited at cathode when a current of 2 amperes…

Solve the following.

(i)[2.5]
Calculate the mass of silver deposited at cathode when a current of $2\text{ amperes}$ is passed through a solution of $\text{AgNO}_3$ for $15\text{ minutes}$. (at. wt. of $\text{Ag} = 108, 1\text{ F} = 96,500\text{ C}$)
(ii)[2.5]
Calculate the emf and $\Delta G$ for the cell reaction at $298\text{ K}$: $\text{Mg}(s) \mid \text{Mg}^{2+}(0\cdot1\text{M}) \parallel \text{Cu}^{2+}(0\cdot01\text{M}) \mid \text{Cu}(s)$ Given $E^\circ_\text{cell} = 2\cdot71\text{ V}$, $1\text{F} = 96,500\text{ C}$
Show answer

Answer (i)

Formula used: Faraday's first law: w = M*Q/(n*F) with F = 96500 C mol^-1, I = 2 A, M = 108 g mol^-1, n = 1, t = 900 s, so w = 2.015 g

Formula: $w = \dfrac{M \times I \times t}{n \times F}$ $t = 15 \times 60 = 900\text{ s}$, $Q = It = 2\text{ A} \times 900\text{ s} = 1800\text{ C}$ $w = \dfrac{108\text{ g mol}^{-1} \times 1800\text{ C}}{1 \times 96500\text{ C mol}^{-1}} = 2\cdot015\text{ g}$

Final answer: 2.015 g

Answer (ii)

Formulas used: Nernst equation at 298 K: E = E0 - 0.0591/n*log10(Q) with Q = 10, n = 2, E0 = 2.71 V, so E = 2.68045 V Gibbs energy from emf: dG = -n*F*E with E = 2.68045 V, F = 96500 C mol^-1, n = 2, so dG = -517327 J mol^-1

Cell reaction: $\mathrm{Mg} + \mathrm{Cu^{2+}} \rightarrow \mathrm{Mg^{2+}} + \mathrm{Cu}$, $n = 2$ $Q = \dfrac{[\mathrm{Mg^{2+}}]}{[\mathrm{Cu^{2+}}]} = \dfrac{0\cdot1}{0\cdot01} = 10$ Nernst equation: $E = E^\circ - \dfrac{0\cdot0591}{n}\log Q = 2\cdot71 - \dfrac{0\cdot0591}{2}\log 10 = 2\cdot68\text{ V}$ $\Delta G = -nFE = -2 \times 96500\text{ C mol}^{-1} \times 2\cdot68045\text{ V} = -5\cdot17\times10^{5}\text{ J mol}^{-1}$

Final answer: $E = 2.68\text{ V},\ \Delta G = -517\text{ kJ mol}^{-1}$

Q16(b)5 marks · Short answerOpen: Define the following terms: (1) Specific conductance (2) Kohlrausch’s Law The…

Solve the following.

(i)[2.5]
Define the following terms: (1) Specific conductance (2) Kohlrausch’s Law
(ii)[2.5]
The resistance of a conductivity cell containing $0\cdot001\text{ M KCl}$ solution at $298\text{ K}$ is $1500\text{ ohm}$. What is the cell constant and molar conductivity of $0\cdot001\text{ M KCl}$ solution, if the conductivity of this solution is $0\cdot146 \times 10^{-3}\text{ ohm}^{-1}\text{ cm}^{-1}$ at $298\text{ K}$?
Show answer

Answer (i)

1. Specific conductance (conductivity) is the conductance of a solution of 1 cm length and 1 $\mathrm{cm^2}$ cross-section, i.e. of 1 $\mathrm{cm^3}$ of the solution; unit $\mathrm{S\,cm^{-1}}$. 2. Kohlrausch's law: the limiting molar conductivity of an electrolyte is the sum of the limiting molar conductivities of its cations and anions, each multiplied by the number of ions present in one formula unit of the electrolyte.

Answer (ii)

Formulas used: Conductivity from resistance: kappa = Gstar/Rcell with Rcell = 1500 ohm, kappa = 0.146e-3 S cm^-1, so Gstar = 0.219 cm^-1 Molar conductivity: Lm = kappa/C with C = 0.001 mol L^-1, kappa = 0.146e-3 S cm^-1, so Lm = 146 S cm^2 mol^-1

Cell constant: $G^* = \kappa \times R = 0\cdot146\times10^{-3}\text{ ohm}^{-1}\text{ cm}^{-1} \times 1500\text{ ohm} = 0\cdot219\text{ cm}^{-1}$ Molar conductivity: $\Lambda_m = \dfrac{\kappa \times 1000}{C} = \dfrac{0\cdot146\times10^{-3}\text{ ohm}^{-1}\text{ cm}^{-1} \times 1000\text{ cm}^3\text{ L}^{-1}}{0\cdot001\text{ mol L}^{-1}} = 146\text{ ohm}^{-1}\text{ cm}^2\text{ mol}^{-1}$

Final answer: $G^* = 0.219\text{ cm}^{-1},\ \Lambda_m = 146\text{ ohm}^{-1}\text{ cm}^2\text{ mol}^{-1}$

Q17(a)5 marks · Short answerOpen: Explain why: (1) Fluorine has lower electron affinity than chlorine. (2) Red…

Answer the following.

(i)[3]
Explain why: (1) Fluorine has lower electron affinity than chlorine. (2) Red phosphorus is less reactive than white phosphorous. (3) Ozone acts as a powerful oxidising agent.
(ii)[2]
Draw the structures of the following: (1) $\text{XeF}_6$ (2) $\text{IF}_7$

Draw: structures of XeF6 and IF7

Show answer

Answer (i)

1. Because of the very small size of fluorine, the electron-electron repulsion in its compact 2p subshell is high, so the incoming electron is added less readily than in chlorine. 2. Because red phosphorus has a polymeric chain structure, whereas white phosphorus consists of discrete, strained tetrahedral $\mathrm{P_4}$ molecules. 3. Because ozone easily decomposes to give nascent oxygen: $\mathrm{O_3 \rightarrow O_2 + [O]}$, which is a strong oxidising species.

Answer (ii)

XeF6: hybridisation: sp3d3; shape: distorted octahedral; lone pairs: 1

IF7: hybridisation: sp3d3; shape: pentagonal bipyramidal; lone pairs: 0

1. $\mathrm{XeF_6}$: central Xe with six bond pairs and one lone pair, $sp^3d^3$ hybridisation, distorted octahedral. 2. $\mathrm{IF_7}$: central I with seven bond pairs and no lone pair, $sp^3d^3$ hybridisation, pentagonal bipyramidal.
Q17(b)5 marks · Short answerOpen: Explain why: (1) Interhalogen compounds are more reactive than the related…

Answer the following.

(i)[3]
Explain why: (1) Interhalogen compounds are more reactive than the related elemental halogens. (2) Sulphur exhibits tendency for catenation but oxygen does not. (3) On being slowly passed through water, $\text{PH}_3$ forms bubbles but $\text{NH}_3$ dissolves.
(ii)[2]
Complete and balance the following reactions: (1) $\text{P}_4 + \text{H}_2\text{SO}_4 \rightarrow$ ______ + ______ + ______ (2) $\text{Ag} + \text{HNO}_3\text{ (dilute)} \rightarrow$ ______ + ______ + ______
Show answer

Answer (i)

1. Because the X-X' bond in interhalogens is weaker than the X-X bond in halogens (except F-F). 2. Because the S-S bond is much stronger than the O-O bond; the O-O bond is weak due to repulsion between lone pairs on the small oxygen atoms. 3. Because $\mathrm{PH_3}$ cannot form hydrogen bonds with water, whereas $\mathrm{NH_3}$ forms hydrogen bonds with water and so dissolves.

Answer (ii)

Equations: $\mathrm{P_{4}} + 10\mathrm{H_{2}SO_{4}} \xrightarrow{\text{conc.}\text{ }\mathrm{H_{2}SO_{4}}\text{,}\text{ }\text{heat}} 4\mathrm{H_{3}PO_{4}} + 10\mathrm{SO_{2}} + 4\mathrm{H_{2}O}$ $3\mathrm{Ag} + 4\mathrm{HNO_{3}} \xrightarrow{\text{dilute}\text{ }\mathrm{HNO_{3}}} 3\mathrm{AgNO_{3}} + \mathrm{NO} + 2\mathrm{H_{2}O}$

(1) Hot concentrated sulphuric acid oxidises white phosphorus to phosphoric acid. (2) Silver reacts with dilute nitric acid to give silver nitrate and nitric oxide.
Q18(a)5 marks · ReactionOpen: Give balanced chemical equations for the following reactions: (1) Acetaldehyde…

Answer the following.

(i)[3]
Give balanced chemical equations for the following reactions: (1) Acetaldehyde reacts with hydrogen cyanide. (2) Acetone reacts with phenyl hydrazine. (3) Acetic acid is treated with ethanol and a drop of conc. $\text{H}_2\text{SO}_4$.
(ii)[2]
Give one chemical test each to distinguish between the following pairs of compounds: (1) Acetone and benzaldehyde. (2) Phenol and benzoic acid.
Show answer

Answer (i)

Equations: $\mathrm{CH_{3}CHO} + \mathrm{HCN} \xrightarrow{\text{trace}\text{ }\text{of}\text{ }\text{base}} \mathrm{CH_{3}CH(OH)CN}$ $\mathrm{CH_{3}COCH_{3}} + \mathrm{C_{6}H_{5}NHNH_{2}} \longrightarrow \mathrm{(CH_{3})_{2}C=NNHC_{6}H_{5}} + \mathrm{H_{2}O}$ $\mathrm{CH_{3}COOH} + \mathrm{C_{2}H_{5}OH} \xrightarrow{\text{conc.}\text{ }\mathrm{H_{2}SO_{4}}\text{,}\text{ }\text{heat}} \mathrm{CH_{3}COOC_{2}H_{5}} + \mathrm{H_{2}O}$

Products: 2-hydroxypropanenitrile, propanone phenylhydrazone, ethyl ethanoate

(1) Addition of HCN gives acetaldehyde cyanohydrin. (2) Acetone condenses with phenylhydrazine to give acetone phenylhydrazone. (3) Esterification gives ethyl ethanoate.

Answer (ii)

Tollens' test test: reagent: Tollens' reagent (ammoniacal silver nitrate); positive: benzaldehyde; observation: a bright silver mirror forms; other: acetone: no silver mirror

1. Acetone and benzaldehyde: Tollens' test. Benzaldehyde gives a silver mirror with Tollens' reagent; acetone gives none. 2. Phenol and benzoic acid: sodium hydrogencarbonate test. Benzoic acid gives brisk effervescence of $\mathrm{CO_2}$; phenol does not. (Neutral $\mathrm{FeCl_3}$ gives a violet colour with phenol only.)
Q18(b)5 marks · ReactionOpen: Write chemical equations to illustrate the following name reactions: (1) Aldol…

Answer the following.

(i)[3]
Write chemical equations to illustrate the following name reactions: (1) Aldol condensation. (2) Cannizzaro’s reaction. (3) Benzoin condensation.
(ii)[2]
Identify the compounds A and B in the given reactions: (1) $\text{Benzene} \xrightarrow[\text{anhydrous AlCl}_3]{\text{CH}_3\text{Cl}} \text{A} \xrightarrow[\text{K}_2\text{Cr}_2\text{O}_7 + \text{H}_2\text{SO}_4]{[\text{O}]} \text{B}$ (2) $\text{CH}_3\text{COCH}_3 \xrightarrow[\text{HNO}_3\text{ (conc.)}]{[\text{O}]} \text{A} \xrightarrow{\text{PCl}_5} \text{B}$
Show answer

Answer (i)

Equations: $2\mathrm{CH_{3}CHO} \xrightarrow{\text{Aldol}\text{ }\text{condensation}\text{,}\text{ }\text{dil.}\text{ }\text{NaOH}} \mathrm{CH_{3}CH(OH)CH_{2}CHO}$ $2\mathrm{C_{6}H_{5}CHO} + \mathrm{NaOH} \xrightarrow{\text{Cannizzaro's}\text{ }\text{reaction}\text{,}\text{ }\text{conc.}\text{ }\text{NaOH}} \mathrm{C_{6}H_{5}CH_{2}OH} + \mathrm{C_{6}H_{5}COONa}$ $2\mathrm{C_{6}H_{5}CHO} \xrightarrow{\text{Benzoin}\text{ }\text{condensation}\text{,}\text{ }\text{alc.}\text{ }\text{KCN}} \mathrm{C_{6}H_{5}CH(OH)COC_{6}H_{5}}$

Products: 3-hydroxybutanal, benzyl alcohol and sodium benzoate, benzoin

(1) Aldol condensation: ethanal with dilute alkali gives 3-hydroxybutanal. (2) Cannizzaro's reaction: benzaldehyde (no alpha-hydrogen) with conc. alkali gives benzyl alcohol and sodium benzoate. (3) Benzoin condensation: benzaldehyde with alcoholic KCN gives benzoin.

Answer (ii)

A (1) - methylbenzene: C6H5CH3

B (1) - benzoic acid: C6H5COOH

A (2) - ethanoic acid: CH3COOH

B (2) - ethanoyl chloride: CH3COCl

(1) A = methylbenzene ($\mathrm{C_6H_5CH_3}$), B = benzoic acid ($\mathrm{C_6H_5COOH}$) (2) A = ethanoic acid ($\mathrm{CH_3COOH}$), B = ethanoyl chloride ($\mathrm{CH_3COCl}$)

About this board paper

The ISC Chemistry 2019 Question Paper is a board paper for Class 12: 48 questions in printed order, 70 marks in all, asked from 20 chapters. The board paper is the exam itself: the question paper CISCE set for that year’s ISC candidates. Solve it in one sitting, in the time allowed, to see how questions are worded and how hard the real paper is.

The layout of the current Chemistry paper (sections, marks, choices) is in the paper pattern guide.

By kind of question

KindQuestionsMarks printed*
Short answer1732
Numerical720
Reaction715
Fill in44
MCQ44
Coordination complex24
Conversion24
Match14
Complete13
Derivation12
Identify12
One word11

By chapter

ChapterQuestionsMarks printed*
Electrochemistry311
Group-17 Elements311
Aldehydes and Ketones210
Solutions49
Chemical Kinetics58
d-and f-Block Elements48
Coordination Compounds35
Diazonium salts25
General Principles and Processes of Isolation of Elements44
Phenols24
Polymers33
Surface Chemistry33
Solid State13
Chemistry in Everyday Life22
Haloalkanes and Haloarenes22
Carboxylic Acids12
Vitamins12
Alcohols11
Aniline11
Cyanides and Isocyanides11

* Marks are those printed on each question; where a question offers an either-or choice, both options are counted, so the totals can come to more than the paper’s own total.

Common questions

How many questions are in the ISC Chemistry 2019 Question Paper?

48 questions, 70 marks in all, shown in full and in printed order on this page.

Which chapters does the ISC Chemistry 2019 Question Paper ask most about?

By number of questions: Chemical Kinetics (5), Solutions (4), d-and f-Block Elements (4) and General Principles and Processes of Isolation of Elements (4).

Does this page have the answers to the ISC Chemistry 2019 Question Paper?

Tap “Show answer” under a question to see its answer. The download button saves the paper as a PDF, with or without the answers.