Prashnikaप्रश्निका
Code
About
PhysicsSpecimenClass 12

ISC Physics 2027 Specimen Paper with Answers

The ISC Physics 2027 Specimen Paper for Class 12: all 51 questions, 70 marks in all, in printed order and in full. It is free to download: tap "Show answer" under a question to see its answer, or use the download button to save the questions as a PDF, with or without answers; "Print this paper" below prints it as it was set.

51questions
70marks
15chapters
Q1(A)(i)1 mark · MCQOpen: A point charge -Q and three points A, B and C are shown in Figure 1 below. If V…

Choose the correct option.

A point charge $-Q$ and three points A, B and C are shown in Figure 1 below. If V is electric potential and E is electric field intensity, we can infer that:
  • a$E_A > E_B > E_C$
  • b$E_A < E_B < E_C$
  • c$V_A < V_C < V_B$
  • d$V_A > V_C > V_B$
Figure 1
Figure 1
Show answer

Answer

Official answer key

Correct option: c

Answer: (c) $V_A < V_C < V_B$ For a negative charge, potential is negative and rises towards zero with distance, so $V_A < V_C < V_B$; the field magnitude falls with distance, so $E_A > E_C > E_B$, which rules out (a) and (b).
Q1(A)(ii)1 mark · MCQOpen: Select the odd one out from the following options:

Choose the correct option.

Select the odd one out from the following options:
  • aIron
  • bNickel
  • cCobalt
  • dPlatinum
Show answer

Answer

Official answer key

Correct option: d

Answer: (d) Platinum Iron, nickel and cobalt are ferromagnetic, whereas platinum is paramagnetic.
Q1(A)(iii)1 mark · MCQOpen: In Figure 2 below, CD is an infinitely long and straight metallic wire carrying…

Choose the correct option.

In Figure 2 below, CD is an infinitely long and straight metallic wire carrying a current I. Point P is at a perpendicular distance $r$ from it. Which combination of I and r gives maximum magnetic field at point P, pointing into the plane of the paper?
  • a$I = 4\text{A}$ towards C, with $r = 0\cdot500\text{ m}$
  • b$I = 4\text{A}$ towards D, with $r = 0\cdot250\text{ m}$
  • c$I = 8\text{A}$ towards C, with $r = 0\cdot125\text{ m}$
  • d$I = 8\text{A}$ towards C, with $r = 0\cdot050\text{ m}$
Figure for this question
Show answer

Answer

Official answer key

Correct option: d

Answer: (d) $I = 8\text{A}$ towards C, with $r = 0\cdot050\text{ m}$ $B = \frac{\mu_0 I}{2\pi r}$ is largest for the greatest $I/r$ (8/0.050 = 160), and by the right-hand rule current towards C gives a field into the plane of the paper at P.
Q1(A)(iv)1 mark · MCQOpen: Match the entries in Column I with those in Column II: Column I Column II 1…

Choose the correct option.

Match the entries in Column I with those in Column II:
Column IColumn II
1. PlanckA. Hydrogen spectrum
2. EinsteinB. Wave nature of particles
3. BohrC. Quantum theory
4. de BroglieD. Mass energy relation
  • a1-C, 2-D, 3-A, 4-B
  • b1-B, 2-D, 3-C, 4-A
  • c1-C, 2-A, 3-B, 4-D
  • d1-A, 2-B, 3-D, 4-C
Show answer

Answer

Official answer key

Correct option: a

Answer: (a) 1-C, 2-D, 3-A, 4-B Planck: quantum theory; Einstein: mass-energy relation; Bohr: hydrogen spectrum; de Broglie: wave nature of particles.
Q1(A)(v)1 mark · MCQOpen: Identify the phenomena that occur when a P-N junction diode is forward biased…

Choose the correct option.

Identify the phenomena that occur when a P-N junction diode is forward biased: (P) The width of the depletion layer decreases. (Q) The height of the potential barrier is lowered. (R) The effective resistance of the diode increases significantly. (S) The reverse current flows mainly due to the diffusion of majority charge carriers.
  • aBoth (P) and (Q)
  • bBoth (R) and (S)
  • cBoth (P) and (S)
  • dBoth (Q) and (R)
Show answer

Answer

Official answer key

Correct option: a

Answer: (a) Both (P) and (Q) On forward bias the depletion layer narrows and the potential barrier is lowered, while the effective resistance falls (R is false) and (S) describes reverse bias, which is due to minority carriers (S is false).
Q1(A)(vi)1 mark · MCQOpen: In an astronomical telescope of refracting type,

Choose the correct option.

In an astronomical telescope of refracting type,
  • aObjective lens has smaller focal length, and eyepiece lens has greater focal length.
  • bObjective lens has greater focal length, and eyepiece lens has smaller focal length.
  • cBoth objective lens and eyepiece lens have large focal length.
  • dBoth objective lens and eyepiece lens have small focal length.
Show answer

Answer

Official answer key

Correct option: b

Answer: (b) Objective lens has greater focal length, and eyepiece lens has smaller focal length. Magnifying power $m = f_o/f_e$ is large only when $f_o$ is large and $f_e$ is small.
Q1(A)(vii)1 mark · Assertion-reasonOpen: The focal length of a convex mirror will increase, if the mirror is placed in…

Study the Assertion and Reason and choose the correct option.

Assertion: The focal length of a convex mirror will increase, if the mirror is placed in water.

Reason: The focal length of a convex mirror is equal to half its radius of curvature.

  • aBoth Assertion and Reason are true, and Reason is the correct explanation for Assertion.
  • bBoth Assertion and Reason are true, but Reason is not the correct explanation for Assertion.
  • cAssertion is true and Reason is false.
  • dAssertion is false and Reason is true.
Show answer

Answer

Official answer key

Correct option: d

Answer: (d) Assertion is false and Reason is true. $f = R/2$ depends only on the geometry of the mirror, so it does not change when the mirror is placed in water; the assertion is false and the reason is true.
Q1(B)(i)1 mark · Short answerOpen: Two point charges Q₁ and Q₂, separated by a distance, are such that there is no…

Answer the following.

Two point charges $Q_1$ and $Q_2$, separated by a distance, are such that there is no neutral point (where electric field is zero) in their vicinity. What is the relation between $Q_1$ and $Q_2$?
Show answer

Answer

Official answer key
$Q_2 = -Q_1$, i.e. the two charges are equal and opposite and form an electric dipole.
Q1(B)(ii)1 mark · Short answerOpen: Compare resistance of an ideal voltmeter with that of an ideal ammeter.

Answer the following.

Compare resistance of an ideal voltmeter with that of an ideal ammeter.
Show answer

Answer

Official answer key
An ideal voltmeter has infinite resistance ($R_v = \infty$) while an ideal ammeter has zero resistance ($R_a = 0$); a voltmeter has a very high resistance and an ammeter a very low resistance.
Q1(B)(iii)1 mark · Short answerOpen: How can the focal length of a given convex lens be measured in Physics…

Answer the following.

How can the focal length of a given convex lens be measured in Physics laboratory using only a metre scale?
Show answer

Answer

Official answer key
By the distant object method: focus the image of a very distant object (e.g. the sun or a far window) sharply on a screen using the lens. The distance between the lens and the screen, measured with the metre scale, is the focal length of the lens.
Q1(B)(iv)1 mark · Short answerOpen: What is the difference between a moving metallic ball colliding with another…

Answer the following.

What is the difference between a moving metallic ball colliding with another ball in motion and a photon colliding with an electron?
Show answer

Answer

Official answer key
When a photon collides with an electron it loses either its entire energy or none at all, whereas a moving metallic ball can lose any fraction of its energy in a collision.
Q1(B)(v)1 mark · Short answerOpen: When can a gamma ray photon produce a proton and an antiproton pair?

Answer the following.

When can a gamma ray photon produce a proton and an antiproton pair?
Show answer

Answer

Official answer key
When its energy is at least $2m_pc^2 = 938\cdot3 + 938\cdot3 = 1876\cdot6\text{ MeV}$ (the combined rest energy of a proton and an antiproton).
Q1(B)(vi)1 mark · Short answerOpen: Explain why resistance of a semiconductor material decreases when its…

Answer the following.

Explain why resistance of a semiconductor material decreases when its temperature is increased.
Show answer

Answer

Official answer key
As temperature rises, more electrons break their covalent bonds and cross the forbidden energy gap into the conduction band. The number of free charge carriers (electrons and holes) increases greatly, so the resistance decreases.
Q2(i)2 marks · NumericalOpen: A negatively charged thundercloud above the earth’s surface may be perceived as…

Solve the following.

A negatively charged thundercloud above the earth’s surface may be perceived as a parallel plate capacitor. (Refer to the image below.) The lower plate of the capacitor is the Earth’s surface, and the upper plate is the base of the thundercloud. The area of the base of the thundercloud $= 4\cdot5 \times 10^8\text{ m}^2$, distance of thundercloud base from the earth’s surface $= 4425\text{ m}$. Calculate the capacitance of this capacitor.
Figure 3
Figure 3
Show answer

Answer

Formula used: Parallel-plate capacitor (K for a dielectric filling it): C = K*eps0*area/d with K = 1, d = 4425 m, area = 4.5e8 m^2, eps0 = 8.85e-12 F/m, so C = 9e-7 F

Given: $A = 4.5 \times 10^8\text{ m}^2$, $d = 4425\text{ m}$ $C = \frac{\varepsilon_0 A}{d} = \frac{8.85 \times 10^{-12} \times 4.5 \times 10^8}{4425}$ $= 9 \times 10^{-7}\text{ F}$

Final answer: 9e-7 F

Q2(ii)2 marks · NumericalOpen: A tiny bird carrying a charge of q = 8 × 10⁻¹⁷ C dives vertically down towards…

Solve the following.

A tiny bird carrying a charge of $q = 8 \times 10^{-17}\text{ C}$ dives vertically down towards a large positively charged metallic plate kept on a table in a horizontal position. What should be the surface charge density ($\sigma$) of the plate so that the bird stops in its flight, close to the plate? (Mass of the bird $= 50\text{ g}$)
Show answer

Answer

The bird stops when the upward electric force balances its weight: $qE = mg$. Taking the plate as a large charged sheet, $E = \frac{\sigma}{2\varepsilon_0}$, so $q\frac{\sigma}{2\varepsilon_0} = mg$. $\sigma = \frac{2mg\varepsilon_0}{q} = \frac{2 \times 50 \times 10^{-3} \times 9.8 \times 8.85 \times 10^{-12}}{8 \times 10^{-17}}$ $= 1.08 \times 10^5\text{ C m}^{-2}$

Final answer: 1.08e5 C m^-2

Q32 marks · DrawingOpen: Draw a labelled diagram of an arrangement used in Physics laboratory to compare…

Draw the following.

Draw a labelled diagram of an arrangement used in Physics laboratory to compare emfs of two given cells X and Y.
Show answer

Answer

Official answer key

Worked out by the server: every current and potential difference

PartCurrentp.d.
ED0.1243 A1.938 V
RH0.1243 A0.6216 V
RW10.1426 A0.5702 V
RW20.1243 A0.746 V
EX0.01823 A1.482 V
G10.01823 A0.9115 V
EY0 A1.2 V
The arrangement is a potentiometer. A driver cell D, rheostat Rh and key K are connected in series across the two ends P and Q of the potentiometer wire. The positive terminals of cells X and Y are joined to the end P (where D's positive terminal is connected); their negative terminals go through keys K1 and K2 respectively to a galvanometer G, whose other end is connected to a jockey J that slides along the wire PQ. With K1 closed (K2 open) the balance length $l_1$ is found; with K2 closed (K1 open) the balance length $l_2$ is found, and $E_1/E_2 = l_1/l_2$. (In the drawing K1 is shown closed and K2 open; the wire PQ is drawn as its two lengths meeting at the jockey J.)
Q4(i)2 marks · Short answerOpen: According to Ohm’s law, V = IR, so if potential difference (V) between the two…

Answer the following.

According to Ohm’s law, $V = IR$, so if potential difference (V) between the two ends of a metallic conductor is decreased, then resistance (R) of the conductor should also decrease. Is this deduction correct? Explain.
Show answer

Answer

Official answer key
No, the deduction is not correct. The resistance of a metallic conductor is constant (at a given temperature); it depends on the material, length, area and temperature, not on $V$ or $I$. If $V$ is decreased, the current $I$ decreases in the same proportion so that $V/I = R$ remains unchanged.
Q4(ii)2 marks · Short answerOpen: Heating power developed in a resistor R is given by P = (V²)/R. This implies…

Answer the following.

Heating power developed in a resistor R is given by $P = \frac{V^2}{R}$. This implies that the heating power is inversely proportional to resistance. Is this inference correct? Explain.
Show answer

Answer

Official answer key
No, not in general. $P \propto 1/R$ holds only when $V$ is constant, i.e. when resistors are connected in parallel (same p.d.). When the current is constant, i.e. for resistors in series, $P = I^2R$ and so $P \propto R$.
Q52 marks · Short answerOpen: Explain why a blue coloured spark appears in a switch contact when a circuit…

Answer the following.

Explain why a blue coloured spark appears in a switch contact when a circuit containing a load like a heater, geyser or iron is switched off.
Show answer

Answer

Official answer key
On switching off, the current falls rapidly in an inductive load, so a very large emf ($-L\,dI/dt$) is induced across the contact gap. This large emf makes the air in the gap break down and produce an electric discharge (spark). The ionised air molecules emit light (blue) as they return from excited states to the ground state.
Q62 marks · Short answerOpen: There are seven types of electromagnetic waves having different frequency…

Answer the following.

There are seven types of electromagnetic waves having different frequency ranges. Arrange them in the increasing order of their frequency.
Show answer

Answer

Official answer key
Increasing order of frequency: Radio waves < Microwaves < Infrared waves < Visible light < Ultraviolet rays < X-rays < Gamma rays.
Q7(ii)1 mark · Short answerOpen: Extrinsic semiconductors are neither good nor bad conductors of electricity…

Answer the following.

Extrinsic semiconductors are neither good nor bad conductors of electricity. Why are they still considered useful?
Show answer

Answer

Because their conductivity can be controlled by the amount and kind of doping (n-type or p-type), so p-type and n-type material can be joined to make p-n junction diodes, transistors and integrated circuits.
Q82 marks · NumericalOpen: Two particles A and B of masses m_A and m_B have de Broglie wavelength λ_A and…

Solve the following.

Two particles A and B of masses $m_A$ and $m_B$ have de Broglie wavelength $\lambda_A$ and $\lambda_B$. If $\lambda_A = 2\lambda_B$, compare their kinetic energies $K_A$ and $K_B$.
Show answer

Answer

Official answer key
Kinetic energy $K = \frac{p^2}{2m}$ and $p = \frac{h}{\lambda}$, so $K = \frac{h^2}{2m\lambda^2}$. $\frac{K_A}{K_B} = \frac{m_B\lambda_B^2}{m_A\lambda_A^2} = \frac{m_B\lambda_B^2}{m_A(2\lambda_B)^2} = \frac{m_B}{4m_A}$ Hence $K_A : K_B = m_B : 4m_A$.

Final answer: $m_B : 4m_A$

Q9(i)3 marks · DerivationOpen: Obtain an expression of intensity of electric field at a point lying on the…

Derive the following.

Obtain an expression of intensity of electric field at a point lying on the axis of an electric dipole. (End on position / axial position)
Show answer

Answer

Official answer key
Let the dipole consist of charges $-Q$ at A and $+Q$ at B, separated by $2l$ with centre C. Take a point P on the axis at distance $r$ from C, on the side of $+Q$. 1. Field due to $+Q$ at P (away from B): $E_1 = \frac{1}{4\pi\epsilon_0}\frac{Q}{(r-l)^2}$ 2. Field due to $-Q$ at P (towards A): $E_2 = \frac{1}{4\pi\epsilon_0}\frac{Q}{(r+l)^2}$ 3. $E_1$ and $E_2$ act along the same line in opposite directions, so $E = E_1 - E_2 = \frac{Q}{4\pi\epsilon_0}\left[\frac{1}{(r-l)^2} - \frac{1}{(r+l)^2}\right]$ 4. Simplifying, $E = \frac{Q}{4\pi\epsilon_0}\frac{4rl}{(r^2-l^2)^2}$ 5. With dipole moment $p = Q \times 2l$: $E = \frac{1}{4\pi\epsilon_0}\frac{2pr}{(r^2-l^2)^2}$, directed along the dipole moment (from $-Q$ to $+Q$). For $r \gg l$: $E \approx \frac{1}{4\pi\epsilon_0}\frac{2p}{r^3}$.
  1. Dipole: $-Q$ at A and $+Q$ at B, $AB = 2l$, centre C; P on the axis at distance $r$ from C
  2. Field of $+Q$ at P: $E_1 = \frac{1}{4\pi\epsilon_0}\frac{Q}{(r-l)^2}$ (Coulomb's law, directed away from B)
  3. Field of $-Q$ at P: $E_2 = \frac{1}{4\pi\epsilon_0}\frac{Q}{(r+l)^2}$ (directed towards A)
  4. The fields are collinear and opposite: $E = E_1 - E_2 = \frac{Q}{4\pi\epsilon_0}\left[\frac{1}{(r-l)^2} - \frac{1}{(r+l)^2}\right]$
  5. Simplify: $E = \frac{Q}{4\pi\epsilon_0}\frac{4rl}{(r^2-l^2)^2}$
  6. Using $p = 2Ql$: $E = \frac{1}{4\pi\epsilon_0}\frac{2pr}{(r^2-l^2)^2}$
Q9(ii)3 marks · DerivationOpen: An electric dipole is kept in a uniform electric field E with its axis making…

Derive the following.

An electric dipole is kept in a uniform electric field $E$ with its axis making an angle $\theta$ with the field. Show forces acting on each charge and hence prove that torque acting is given by $\tau = pE\sin\theta$

To show: $\tau = pE\sin\theta$

Show answer

Answer

Checked answer.
$C = \frac{\epsilon_0 A}{d - t + \frac{t}{K}}$, where A is the area of each plate, d the separation, t the thickness of the slab and K its dielectric constant.
  1. Let the plates have area A and separation d, carry charges $+Q$ and $-Q$, and let a slab of thickness $t$ and dielectric constant $K$ be placed between them.
  2. In the air gap (total thickness $d - t$) the field is $E_0 = \frac{\sigma}{\epsilon_0} = \frac{Q}{\epsilon_0 A}$.
  3. Inside the slab the field is reduced by $K$: $E = \frac{E_0}{K} = \frac{Q}{K \epsilon_0 A}$.
  4. Potential difference between the plates: $V = E_0 (d - t) + E t = \frac{Q}{\epsilon_0 A}\left(d - t + \frac{t}{K}\right)$.
  5. Capacitance: $C = \frac{Q}{V} = \frac{\epsilon_0 A}{d - t + \frac{t}{K}}$.
  6. Since $d - t + \frac{t}{K} < d$, the capacitance is greater than without the slab ($\frac{\epsilon_0 A}{d}$).
Q10(i)3 marks · NumericalOpen: Three identical cells each of emf 1·5V and internal resistance of 2 Ω are…

Solve the following.

Three identical cells each of emf $1\cdot5\text{V}$ and internal resistance of $2\,\Omega$ are connected in series to form a battery B. This battery is connected to an ammeter A (of negligible resistance) and five other resistors as shown in Figure 4 below. Calculate the reading of the ammeter A.
Figure 4
Figure 4
Show answer

Answer

Official answer key
$R_4$, $R_5$ and $R_2$ are in parallel: $\frac{1}{R_6} = \frac{1}{30} + \frac{1}{40} + \frac{1}{120} = \frac{4+3+1}{120}$, so $R_6 = 15\,\Omega$. $R_1$, $R_6$ and $R_3$ are in series: $R = 10 + 15 + 14 = 39\,\Omega$. Battery: $E = 3 \times 1\cdot5 = 4\cdot5\text{ V}$, $r = 3 \times 2 = 6\,\Omega$. $I = \frac{E}{R + r} = \frac{4\cdot5}{39 + 6} = 0\cdot1\text{ A}$

Final answer: 0.1 A

Q10(ii)3 marks · NumericalOpen: In the circuit shown in Figure 5 below, the central zero galvanometer G shows…

Solve the following.

In the circuit shown in Figure 5 below, the central zero galvanometer G shows no deflection when the key K is closed. Calculate the value of resistor $R_1$.
Figure 5
Figure 5
Show answer

Answer

Official answer key
$R_2$ and $R_3$ are in parallel: $\frac{1}{R_4} = \frac{1}{12} + \frac{1}{24}$, so $R_4 = 8\,\Omega$. The galvanometer shows no deflection, so the bridge is balanced and, with the 100 cm wire (balance point at 60 cm): $\frac{R_1}{R_4} = \frac{l}{100-l} = \frac{60}{40}$ $R_1 = \frac{60 \times 8}{40} = 12\,\Omega$

Final answer: 12 ohm

Q11(i)1.5 marks · Short answerOpen: State the direction of the applied electric field with a proper reason.

Answer the following.

State the direction of the applied electric field with a proper reason.
Figure 6
Figure 6
Show answer

Answer

Official answer key
The electric field must be in the plane of the paper, pointing vertically downwards. The alpha particle (positive) moving to the right in a field into the page experiences a magnetic force $qvB$ upwards, so the electric force $qE$ must act downwards to balance it.
Q11(ii)1.5 marks · Short answerOpen: Without any change in the electric and magnetic field, the alpha particle is…

Answer the following.

Without any change in the electric and magnetic field, the alpha particle is replaced by a proton moving with a velocity v. Will there be any change in the path of the particle? Give a reason for your answer.
Figure 6
Figure 6
Show answer

Answer

Official answer key
No, the path will not change. For the alpha particle to pass undeviated, $qvB = qE$, so $v = E/B$, which does not depend on the charge or mass of the particle. The proton has the same $v$, $E$ and $B$, so the forces still balance and it also moves undeviated.
Q12(i)1 mark · Short answerOpen: State any one difference between the nature of magnetic field inside a current…

Answer the following.

State any one difference between the nature of magnetic field inside a current carrying solenoid and that along the axis of a current carrying circular coil.
Show answer

Answer

The magnetic field inside a long current carrying solenoid is uniform, whereas the field along the axis of a circular coil is non-uniform: it is strongest at the centre and decreases with distance from it.
Q12(ii)1 mark · Short answerOpen: A current is passed through a circular coil A in a clockwise direction, as…

Answer the following.

A current is passed through a circular coil A in a clockwise direction, as shown in Figure 7. B is another circular coil which does not carry any current. However, when it is moved towards the coil A, current is induced in it. What is the direction of this induced current?
Figure for this question
Show answer

Answer

Official answer key
The induced current in B is anticlockwise (as seen by the observer O). As B moves towards A, the flux through B due to A (into the plane, as seen by O, for the clockwise current) increases; by Lenz's law the induced current opposes this increase, so it is anticlockwise.
Q12(iii)1 mark · Short answerOpen: Why is steel preferred to soft iron in making permanent magnets.

Answer the following.

Why is steel preferred to soft iron in making permanent magnets.
Show answer

Answer

Because steel has a high retentivity and a large coercive force, so once magnetised it keeps its magnetism and is not easily demagnetised, while soft iron has a low coercivity and loses its magnetism easily.
Q13(i)1 mark · True/falseOpen: Teacher: The path difference between S₁P and S₂P at a point P on the screen of…

State whether the following is true or false, with a reason.

Teacher: The path difference between $S_1P$ and $S_2P$ at a point P on the screen of two interfering light waves is exactly $1\cdot2 \times 10^{-6}\text{ m}$. If the light emitted by the source has a wavelength of $600\text{ nm}$, can anyone tell me whether a bright or a dark fringe will form at the point P? Student: Dark fringe will be obtained.
Figure 8
Figure 8
Show answer

Answer

Official answer key

False

Corrected: A bright fringe will be obtained at P, since the path difference is $2\lambda$.

Incorrect: a bright fringe is obtained at P. The path difference is $1\cdot2 \times 10^{-6}\text{ m} = 2 \times 600\text{ nm} = 2\lambda$, an integral multiple of $\lambda$, which is the condition for constructive interference.
Q13(ii)1 mark · True/falseOpen: Teacher: Two students performed the same Young’s double slit experiment. One…

State whether the following is true or false, with a reason.

Teacher: Two students performed the same Young’s double slit experiment. One student obtained wider fringes. What is the possible reason for this observation? Student: The student who obtained wider fringes must have increased the distance between the two slits.
Figure 8
Figure 8
Show answer

Answer

Official answer key

False

Corrected: The student must have decreased the slit separation.

Incorrect: the fringe width is $\beta = \frac{\lambda D}{d}$, so wider fringes are obtained by decreasing the slit separation $d$ (or increasing $D$ or $\lambda$), not by increasing it.
Q13(iii)1 mark · True/falseOpen: Teacher: If one of the slits is closed with a finger while performing the…

State whether the following is true or false, with a reason.

Teacher: If one of the slits is closed with a finger while performing the experiment, what change will be noticed on the screen? Student: The screen will get illuminated uniformly.
Figure 8
Figure 8
Show answer

Answer

Official answer key

False

Corrected: A diffraction pattern (central bright band with weaker bands on both sides) is seen on the screen.

Incorrect: with one slit closed there is no interference; the light spreads out by diffraction from the single open slit and a single-slit diffraction pattern is seen on the screen, not uniform illumination.
Q14(i)1.5 marks · NumericalOpen: Calculate the refractive index of the material of prism A.

Answer the following.

Calculate the refractive index of the material of prism A.
Show answer

Answer

Official answer key
$n = \frac{\sin\left(\frac{A + \delta_m}{2}\right)}{\sin\left(\frac{A}{2}\right)} = \frac{\sin 47^\circ}{\sin 30^\circ} = \frac{0\cdot7314}{0\cdot5} \approx 1\cdot46$ (The official key rounds this to $1\cdot47$.)

Final answer: 1.46

Q14(ii)1.5 marks · Short answerOpen: ‘Since prism B has larger minimum deviation, the student claims it must also…

Answer the following.

‘Since prism B has larger minimum deviation, the student claims it must also have the greater dispersive power.’ Is this statement always correct? Justify your answer.
Show answer

Answer

Official answer key
No, the statement is not always correct. A larger minimum deviation indicates a higher mean refractive index, whereas dispersive power $\omega = \frac{n_v - n_r}{n - 1}$ depends on the difference between the refractive indices for violet and red light, which can be smaller for prism B.
Q15(i)1.5 marks · Short answerOpen: An equiconvex lens forms a full size magnified image of a candle flame on a…

Answer the following.

An equiconvex lens forms a full size magnified image of a candle flame on a screen. How will this image change, if at all, when the lens is cut horizontally into two equal parts and only one of them is used? Explain.
Show answer

Answer

Official answer key
The nature, size and position of the image do not change, because the focal length and the object and image distances remain the same. Only the brightness (intensity) of the image is reduced to half, since the lens now collects half as much light.
Q16(i)1 mark · Short answerOpen: Why are no photoelectrons emitted in image ‘A’?

Answer the following.

Why are no photoelectrons emitted in image ‘A’?
Figure 9
Figure 9
Show answer

Answer

Official answer key
The energy of the incident photons is less than the work function of the surface, so no photoelectrons are emitted. Emission requires photon energy at least equal to the threshold work function.
Q16(ii)1 mark · Short answerOpen: Which image corresponds to the highest stopping potential?

Answer the following.

Which image corresponds to the highest stopping potential?
Figure 9
Figure 9
Show answer

Answer

Official answer key
Image C. It has the highest-frequency (highest-energy) photons, so the photoelectrons have the greatest maximum kinetic energy, hence the highest stopping potential.
Q17(i)1 mark · Short answerOpen: What is a solar cell?

Answer the following.

What is a solar cell?
Show answer

Answer

Official answer key
A solar cell (photovoltaic cell) is a semiconductor p-n junction diode that directly converts solar (light) energy into electrical energy.
Q17(ii)1 mark · Short answerOpen: Explain its working in brief.

Answer the following.

Explain its working in brief.
Show answer

Answer

Official answer key
Photons of energy greater than the band gap fall on the junction and break covalent bonds near it, producing electron-hole pairs. The junction field sweeps electrons to the n-side and holes to the p-side, so charges build up and a potential difference (emf) appears across the cell. When an external load is connected, a direct current flows through it.
Q18(i)5 marks · NumericalOpen: The graph below shows variation of current (I) flowing through an electrical…

Answer the following.

AC Graph
AC Graph
(a)[2.5]
The graph below shows variation of current (I) flowing through an electrical device with time (t), when an ac source $e = 240\sin(\omega t)\text{ V}$ is connected to it. (1) Identify the device. (resistor, capacitor or an inductor) (2) Calculate the frequency of the current flowing through the device. (3) How much is the opposition offered by this device?
(b)[2.5]
A train is moving on horizontal tracks that are $1\cdot2\text{ m}$ apart. Its displacement (x) depends on time (t) as $x(\text{m}) = 3t^2 + 6$. Vertical component of earth’s magnetic field in its region of motion is $2 \times 10^{-5}\text{ T}$. Calculate the emf induced between two ends of its axle rod $10\text{ s}$ after the train starts moving.
Show answer

Answer (a)

Official answer key
(1) Capacitor (the current leads the applied emf by $90^\circ$: it is maximum at $t = 0$ when the emf is zero). (2) The period read from the graph is $T = 80\text{ ms}$, so $f = \frac{1}{T} = \frac{1}{80 \times 10^{-3}} = 12\cdot5\text{ Hz}$. (3) The opposition is the capacitive reactance $X_C = \frac{e_0}{i_0} = \frac{240}{6} = 40\,\Omega$.

Answer (b)

Official answer key
$v = \frac{dx}{dt} = 6t$; at $t = 10\text{ s}$, $v = 60\text{ m s}^{-1}$. $\mathcal{E} = B_vLv = 2 \times 10^{-5} \times 1\cdot2 \times 60 = 1\cdot44 \times 10^{-3}\text{ V}$

Final answer: 1.44e-3 V

Q18(ii)5 marks · NumericalOpen: An ac generator generating an emf e = 300 sin(100π t)V is connected to a 100 Ω…

Answer the following.

An ac generator generating an emf $e = 300 \sin(100\pi t)\text{V}$ is connected to a $100\,\Omega$ resistor.
(a)[1]
Draw a labelled graph of current (I) flowing through it versus time (t). Draw one cycle only.
(b)[1]
Calculate the average power consumed by the resistor.
(c)[1.5]
Why ac is preferred to dc, though it has varying values whereas the latter has a fixed value?
(d)[1.5]
State any one difference between a transformer used at the power generating station and the transformer in a city which is used to supply power to households.
Show answer

Answer (a)

Official answer key
$I_0 = \frac{e_0}{R} = \frac{300}{100} = 3\cdot00\text{ A}$; $2\pi f = 100\pi$, so $f = 50\text{ Hz}$ and $T = \frac{1}{f} = 0\cdot02\text{ s}$. The graph is a sine curve of current in phase with the emf: it starts at 0 at $t = 0$, reaches $+3\text{ A}$ at $0\cdot005\text{ s}$, returns to 0 at $0\cdot01\text{ s}$, reaches $-3\text{ A}$ at $0\cdot015\text{ s}$ and returns to 0 at $0\cdot02\text{ s}$ (one cycle).

Answer (b)

Official answer key
$\langle P \rangle = \frac{I_0^2R}{2} = \frac{3^2 \times 100}{2} = 450\text{ W}$

Final answer: 450 W

Answer (c)

Official answer key
Because ac can be stepped up or down easily with the help of a transformer, so power can be transmitted over long distances at high voltage with small loss, whereas dc cannot be stepped up or down.

Answer (d)

Official answer key
The transformer at the power generating station is a step-up transformer, whereas the transformer in the city supplying households is a step-down transformer.
Q19(i)5 marks · DerivationOpen: Write Bohr’s equations for circular motion of an electron around the nucleus…

Answer the following.

(a)[2.5]
Write Bohr’s equations for circular motion of an electron around the nucleus and conservation of angular momentum. Using them, obtain an expression for orbital velocity of an electron.
(b)[2.5]
Prove that $1\text{u} = 931\cdot5\text{ MeV}$ where the terms have their usual meaning.

To show: 1\text{u} = 931\cdot5\text{ MeV}

Show answer

Answer (a)

Official answer key
Bohr's equations for an electron of mass $m$ in a circular orbit of radius $r$ round a nucleus of charge $Ze$: (1) Centripetal force is provided by Coulomb attraction: $\frac{mv^2}{r} = \frac{1}{4\pi\epsilon_0}\frac{(Ze)(e)}{r^2}$ (2) Quantisation of angular momentum: $mvr = \frac{nh}{2\pi}$ From (2), $r = \frac{nh}{2\pi mv}$. Substituting in (1): $mv^2 = \frac{Ze^2}{4\pi\epsilon_0}\cdot\frac{2\pi mv}{nh}$, so $v = \frac{Ze^2}{2\epsilon_0 nh}$.
  1. Coulomb force provides the centripetal force: $\frac{mv^2}{r} = \frac{1}{4\pi\epsilon_0}\frac{(Ze)(e)}{r^2}$
  2. Bohr's quantisation of angular momentum: $mvr = \frac{nh}{2\pi}$
  3. From the quantisation condition: $\frac{1}{r} = \frac{2\pi mv}{nh}$
  4. Rewrite the force equation as $mv^2 = \frac{Ze^2}{4\pi\epsilon_0}\cdot\frac{1}{r}$ and substitute $\frac{1}{r}$: $mv^2 = \frac{Ze^2}{4\pi\epsilon_0}\cdot\frac{2\pi mv}{nh}$
  5. Cancel $mv$ and simplify: $v = \frac{Ze^2}{2\epsilon_0 nh}$

Answer (b)

Checked answer.
$1\text{ u} = 1\cdot6605 \times 10^{-27}$ kg. By $E = mc^2$: $E = 1\cdot6605 \times 10^{-27} \times (2\cdot998 \times 10^8)^2 = 1\cdot4924 \times 10^{-10}$ J. $E = \frac{1\cdot4924 \times 10^{-10}}{1\cdot602 \times 10^{-19}}$ eV $= 9\cdot315 \times 10^8$ eV $= 931\cdot5$ MeV.
  1. $1\text{ u} = \frac{1}{12}$ of the mass of a carbon-12 atom $= 1\cdot6605 \times 10^{-27}$ kg.
  2. Speed of light $c = 2\cdot998 \times 10^8$ m s$^{-1}$.
  3. By Einstein's mass-energy relation, $E = mc^2 = 1\cdot6605 \times 10^{-27} \times (2\cdot998 \times 10^8)^2 = 1\cdot4924 \times 10^{-10}$ J.
  4. $1$ eV $= 1\cdot602 \times 10^{-19}$ J, so $E = \frac{1\cdot4924 \times 10^{-10}}{1\cdot602 \times 10^{-19}}$ eV $= 9\cdot315 \times 10^8$ eV.
  5. $E = 931\cdot5$ MeV, so $1\text{ u} = 931\cdot5$ MeV.
Q19(ii)5 marks · DerivationOpen: Assuming that nuclei are spherical in shape, whose radius R is given by R = R₀…

Answer the following.

(a)[1.5]
Assuming that nuclei are spherical in shape, whose radius R is given by $R = R_0 A^{1/3}$ where $R_0$ is a constant, show that the nuclear density (i.e. density of nuclear matter) is independent of mass number (A) of the nucleus / atom.
(b)[1.5]
What are isotones?
(c)[2]
Name the series of lines in hydrogen spectrum which lies in: (1) Visible region (2) UV region
Show answer

Answer (a)

Official answer key
Let $m$ be the average mass of a nucleon, so the mass of a nucleus of mass number $A$ is $mA$. Nuclear density $\rho = \frac{\text{mass}}{\text{volume}} = \frac{mA}{\frac{4}{3}\pi R^3}$. With $R = R_0A^{1/3}$: $\rho = \frac{3mA}{4\pi R_0^3 A} = \frac{3m}{4\pi R_0^3}$, which does not contain $A$.
  1. Radius of the nucleus: $R = R_0A^{1/3}$, so $R^3 = R_0^3A$
  2. Mass of the nucleus $= mA$, where $m$ is the average mass of a nucleon
  3. Volume of the nucleus (a sphere) $= \frac{4}{3}\pi R^3 = \frac{4}{3}\pi R_0^3 A$
  4. Density $\rho = \frac{mA}{\frac{4}{3}\pi R_0^3 A}$
  5. $A$ cancels: $\rho = \frac{3m}{4\pi R_0^3}$, a constant independent of $A$

Answer (b)

Official answer key
Isotones are atoms (nuclei) that have the same number of neutrons ($N$) but different numbers of protons ($Z$).

Answer (c)

Official answer key
(1) Visible region: Balmer series. (2) UV region: Lyman series.
Q205 marks · Case basedOpen: An innovative optical sensor system for a miniature drone incorporates a…

Answer the following.

An innovative optical sensor system for a miniature drone incorporates a combination of various optical elements. A beam of light from an LED source first passes through a convex spherical refracting surface (radius of curvature R = 20 cm) separating air $\mu_1 = 1\cdot0$ from a glass medium of refractive index $\mu_2 = 1\cdot5$. The light then enters a thin biconvex lens of focal length 10 cm. Finally, the beam strikes a concave spherical mirror of radius of curvature 30 cm, which acts as a collector, focusing the rays onto a photodetector (optical instrument application) to measure light intensity.
(i)[1]
If the drone operates in a highly humid or misty environment where a film of water completely coats the lens surfaces, how will the refractive power of this lens change?
(ii)[2]
A point object is placed in air at a distance of 60 cm in front of the convex spherical refracting surface. What is the position of the image formed by this surface?
(iii)[1]
If this setup is to be modified to function as a reflecting astronomical telescope, what roles would be played by the mirror and the lens?
(iv)[1]
Which mirror collects light from a distant object most efficiently?
Show answer

Answer (i)

Official answer key
The refractive power of the lens decreases (its focal length increases), because the relative refractive index of glass with respect to water is smaller than with respect to air.

Answer (ii)

Official answer key
For refraction at a spherical surface (New Cartesian signs): $\frac{\mu_2}{v} - \frac{\mu_1}{u} = \frac{\mu_2 - \mu_1}{R}$ with $u = -60\text{ cm}$, $R = +20\text{ cm}$: $\frac{1\cdot5}{v} + \frac{1}{60} = \frac{0\cdot5}{20}$, so $\frac{1\cdot5}{v} = \frac{1}{40} - \frac{1}{60} = \frac{1}{120}$ and $v = +180\text{ cm}$. The image is formed 180 cm from the pole, inside the glass (real image).

Final answer: 180 cm

Answer (iii)

Official answer key
The concave spherical mirror must act as the objective, and the thin biconvex lens must act as the eyepiece.

Answer (iv)

Official answer key
A parabolic mirror.

About this specimen paper

The ISC Physics 2027 Specimen Paper is a specimen paper for Class 12: 51 questions in printed order, 70 marks in all, asked from 15 chapters. A specimen paper is the sample question paper CISCE publishes before the exam to show the layout and style of that year’s paper. It is a good guide to the pattern you will meet.

The layout of the current Physics paper (sections, marks, choices) is in the paper pattern guide.

By section

SectionQuestionsMarks printed*
A1414
B1018
C2233
D525

By kind of question

KindQuestionsMarks printed*
Short answer2531.5
Numerical924.5
Derivation416
MCQ66
Case based15
True/false33
Drawing12
Assertion-reason11
Fill in11

By chapter

ChapterQuestionsMarks printed*
Ray Optics and Optical Instruments814
Current Electricity613
Alternating Current210
Dual Nature of Radiation and Matter67
Electrostatic Potential, Potential Energy and Capacitance37
Semiconductor diode66
Nuclei26
Electromagnetic Induction45
Electric Charges and Fields35
Atoms15
Wave Optics44
Moving charges and magnetism34
Electromagnetic Waves12
Magnetism and Matter11
Semiconductor Electronics: Materials, Devices and Simple Circuits11

* Marks are those printed on each question; where a question offers an either-or choice, both options are counted, so the totals can come to more than the paper’s own total.

Common questions

How many questions are in the ISC Physics 2027 Specimen Paper?

51 questions, 70 marks in all, shown in full and in printed order on this page.

Which chapters does the ISC Physics 2027 Specimen Paper ask most about?

By number of questions: Ray Optics and Optical Instruments (8), Current Electricity (6), Dual Nature of Radiation and Matter (6) and Semiconductor diode (6).

Does this page have the answers to the ISC Physics 2027 Specimen Paper?

Tap “Show answer” under a question to see its answer. The download button saves the paper as a PDF, with or without the answers.