Prashnikaप्रश्निका
Code
About
PhysicsClass 12

Electromagnetic Induction - ISC Class 12 Physics Questions with Answers

24 past-paper questions on Electromagnetic Induction from ISC Class 12 Physics papers (2027-2018), newest first, in full. Questions 1-20 are on this page, 20 to a page. Tap "Show answer" under a question to see its answer. The syllabus covers Faraday's laws, Lenz's law, Motional EMF, Eddy currents, Self-induction and self-inductance, Mutual induction and mutual inductance and Transformer.

24questions
8years
2027newest
20274 questions
1 mark · Short answerOpen: Why is steel preferred to soft iron in making permanent magnets.

Answer the following.

Why is steel preferred to soft iron in making permanent magnets.
Show answer

Answer

Because steel has a high retentivity and a large coercive force, so once magnetised it keeps its magnetism and is not easily demagnetised, while soft iron has a low coercivity and loses its magnetism easily.
2 marks · Short answerOpen: Explain why a blue coloured spark appears in a switch contact when a circuit…

Answer the following.

Explain why a blue coloured spark appears in a switch contact when a circuit containing a load like a heater, geyser or iron is switched off.
Show answer

Answer

Official answer key
On switching off, the current falls rapidly in an inductive load, so a very large emf ($-L\,dI/dt$) is induced across the contact gap. This large emf makes the air in the gap break down and produce an electric discharge (spark). The ionised air molecules emit light (blue) as they return from excited states to the ground state.
1 mark · Short answerOpen: State any one difference between the nature of magnetic field inside a current…

Answer the following.

State any one difference between the nature of magnetic field inside a current carrying solenoid and that along the axis of a current carrying circular coil.
Show answer

Answer

The magnetic field inside a long current carrying solenoid is uniform, whereas the field along the axis of a circular coil is non-uniform: it is strongest at the centre and decreases with distance from it.
1 mark · Short answerOpen: A current is passed through a circular coil A in a clockwise direction, as…

Answer the following.

A current is passed through a circular coil A in a clockwise direction, as shown in Figure 7. B is another circular coil which does not carry any current. However, when it is moved towards the coil A, current is induced in it. What is the direction of this induced current?
Figure for this question
Show answer

Answer

Official answer key
The induced current in B is anticlockwise (as seen by the observer O). As B moves towards A, the flux through B due to A (into the plane, as seen by O, for the clockwise current) increases; by Lenz's law the induced current opposes this increase, so it is anticlockwise.
20262 questions
1 mark · Short answerOpen: What is motional emf?

Answer the following.

What is motional emf?
Show answer

Answer

Motional emf is the electromotive force (emf) induced across the ends of a conductor as a result of its motion through a magnetic field.
1 mark · Short answerOpen: State one method to minimise flux loss in a transformer.

Answer the following.

State one method to minimise flux loss in a transformer.
Show answer

Answer

Official answer key
By winding the primary and secondary coils one over the other (interleaving) and by using a core of high permeability (a laminated soft-iron core).
20256 questions
1 mark · Short answerOpen: The electric current flowing in a wire in the direction B to A is decreasing…

Answer the following.

The electric current flowing in a wire in the direction B to A is decreasing. What is the direction of the induced current in the metallic loop kept above the wire, as shown in the figure?
Show answer

Answer

Official answer key
By right-hand thumb rule, the magnetic field of the current in wire AB acts on the loop in a direction perpendicular to the plane of paper and inwards. By Lenz's law, the induced current should oppose the decrease in flux, i.e., it should also produce inward flux. So, the induced current flows in the clockwise direction.
3 marks · Short answerOpen: Figure 9 below shows a metallic rod PQ resting on two parallel thick and smooth…

Answer the following.

Figure 9 below shows a metallic rod PQ resting on two parallel thick and smooth metallic rails CS and DR. There is a uniform magnetic field B which is perpendicular to the rails.
Figure for this question
(a)[1]
How much magnetic flux is linked to the closed circuit PQRS?
(b)[1]
If the rod PQ is moved on the rails with a constant velocity v, how much emf will be induced in it?
(c)[1]
How much power has to be spent by an external agency to maintain the motion of the rod PQ on the rails? Write your answer in terms of B, $l$, v and resistance R of the rod PQ.
Show answer

Answer (a)

The area of circuit PQRS is $lx$ and $\vec B$ is perpendicular to it, so the flux linked is $\phi = Blx$.

Answer (b)

$\varepsilon = -\frac{d\phi}{dt} = Bl\frac{dx}{dt}$, so the magnitude of the induced emf is $\varepsilon = Blv$.

Answer (c)

Current $I = \frac{Blv}{R}$; magnetic force on the rod $F = BIl = \frac{B^2l^2v}{R}$. The external agent must balance this force, so power $P = Fv = \frac{B^2l^2v^2}{R}$.
5 marks · NumericalOpen: The magnetic field through a single loop of wire, 12 cm in radius and 8· 5 Ω…

Answer the following.

The magnetic field through a single loop of wire, $12\text{ cm}$ in radius and $8\cdot 5\ \Omega$ resistance, changes with time as shown in graph below (Figure 9). The magnetic field is perpendicular to the plane of the loop.
Figure for this question
(a)[2.5]
Find the induced emf for the time intervals 0 to $2\cdot 0\text{ s}$, $2\cdot 0$ to $4\cdot 0\text{ s}$, and $4\cdot 0$ to $6\cdot 0\text{ s}$.
(b)[2.5]
Hence, plot induced current as a function of time.
Show answer

Answer (a)

Official answer key
$e = -\frac{d\phi}{dt} = -\frac{d(NAB\cos\theta)}{dt}$ $e = -0.023\ \text{V}$ $i = \frac{e}{R} = -\frac{0.023}{8.5} = -2.7 \times 10^{-3}\ \text{A}$ t: 0 to 2.0 s: $i = -2.7 \times 10^{-3}\ \text{A}$ t: 2.0 s to 4.0 s: $i = 0$ t: 4.0 s to 6.0 s: $i = +2.7 \times 10^{-3}\ \text{A}$

Final answer: -0.023 V

Answer (b)

Official answer key
Graph of induced current $I$ (mA) against time $t$ (s): $I = -2.7$ mA from 0 to 2 s, $I = 0$ from 2 to 4 s, $I = +2.7$ mA from 4 to 6 s (step graph, horizontal segments).
5 marks · NumericalOpen: When current flowing through a solenoid increases from 0 to 10 A in 0.2 s, an…

Solve the following.

Figure for this question
(a)[1.5]
When current flowing through a solenoid increases from $0$ to $10\text{ A}$ in $0.2\text{ s}$, an emf of $20\text{ V}$ is induced in it. Calculate the coefficient of self-inductance (L) of the solenoid.
(b)[1.5]
An ideal step-up transformer is shown in Figure 11 below: (1) Calculate its turns ratio. (2) Which of the windings: primary or secondary, carries larger current? Give a reason for your answer.
(c)[2]
An ac source generates an emf 'e' given by $e = 311 \sin(100\pi t)\text{ V}$ Calculate rms value of the emf generated by the source.
Show answer

Answer (a)

Formula used: Self-induced emf: emf = L*dI/dt with dI = 10 A, dt = 0.2 s, emf = 20 V, so L = 0.4 H

$\varepsilon = L\frac{dI}{dt}$, so $L = \frac{\varepsilon\,\Delta t}{\Delta I} = \frac{20\times0.2}{10} = 0.4\text{ H}$.

Final answer: 0.4 H

Answer (b)

(1) Turns ratio $\frac{N_s}{N_p} = \frac{V_s}{V_p} = \frac{44000}{440} = 100$. (2) The primary winding carries the larger current: for an ideal transformer $V_pI_p = V_sI_s$, so $\frac{I_p}{I_s} = \frac{V_s}{V_p} = 100$.

Answer (c)

Formula used: rms and peak values: rms = peak/sqrt(2) with peak = 311 V, so rms = 219.9 V

Peak emf $E_0 = 311\text{ V}$, so $E_{rms} = \frac{E_0}{\sqrt2} = \frac{311}{1.414} \approx 220\text{ V}$.

Final answer: 220 V

5 marks · NumericalOpen: Figure 9 shows a metallic rod MN of length l = 3 m moving in an external…

Solve the following.

Figure for this question
(a)[2.5]
Figure 9 shows a metallic rod MN of length $l = 3\text{ m}$ moving in an external uniform magnetic field, $B = \left(\frac{2}{3}\right)\text{ T}$ which is directed into the plane of this paper. If the position of the rod changes with time as $x = \pi t$, where $x$ is in meter and $t$ is in second, then: (1) Calculate the motional emf developed in the rod. (2) Name the law used to find the direction of induced current.
(b)[2.5]
When current flowing through a solenoid decreases from $15\text{ A}$ to $0$ in $0.2\text{ s}$, an emf of $30\text{ V}$ is induced in it. Calculate the coefficient of self-inductance of the solenoid.
Show answer

Answer (a)

Formula used: Emf across a rod moving through a field: emf = B*l*v with B = 0.6667 T, l = 3 m, v = 3.1416 m s^-1, so emf = 6.28 V

(1) $v = \frac{dx}{dt} = \pi\text{ m s}^{-1}$. Motional emf $\varepsilon = Blv = \frac{2}{3}\times3\times\pi = 2\pi \approx 6.28\text{ V}$. (2) Lenz's law (the direction of the induced current opposes the change in flux causing it; Fleming's right-hand rule gives it for a moving rod).

Final answer: 6.28 V

Answer (b)

Formula used: Self-induced emf: emf = L*dI/dt with dI = 15 A, dt = 0.2 s, emf = 30 V, so L = 0.4 H

$\varepsilon = L\frac{dI}{dt}$, so $L = \frac{\varepsilon\,\Delta t}{\Delta I} = \frac{30\times0.2}{15} = 0.4\text{ H}$.

Final answer: 0.4 H

1 mark · NumericalOpen: A circular coil of radius 8 cm and 20 turns rotates about its vertical diameter…

Solve the following.

A circular coil of radius 8 cm and 20 turns rotates about its vertical diameter with an angular speed of $50\text{ s}^{-1}$ in a uniform horizontal magnetic field of magnitude $3 \times 10^{-2}\text{ T}$. Obtain the average electromotive force (e.m.f.) induced in the coil in each rotation.
Show answer

Answer

Official answer key
$\varepsilon = NBA\omega \sin\omega t = \varepsilon_0 \sin\omega t$ Since the average value of $\sin\omega t$ over a cycle is zero, therefore, $\varepsilon_{av} = 0$.

Final answer: 0 V

20241 question
5 marks · NumericalOpen: When current flowing through a solenoid decreases from 5 A to 0 in 20…

Answer the following.

(a)[2.5]
When current flowing through a solenoid decreases from $5\text{ A}$ to 0 in $20\text{ milliseconds}$, an emf of $500\text{ V}$ is induced in it. (1) What is this phenomenon called? (2) Calculate coefficient of self-inductance of the solenoid.
(b)[2.5]
(1) RMS value of an alternating current flowing in a circuit is $5\text{ A}$. Calculate its peak value. (2) State any one difference between a direct current (dc) and an alternating current (ac).
Show answer

Answer (a)

Formula used: Self-induced emf: emf = L*dI/dt with dI = 5 A, dt = 0.02 s, emf = 500 V, so L = 2 H

(1) The phenomenon is self-induction. (2) $|\varepsilon| = L\frac{dI}{dt}$, so $L = \frac{\varepsilon\,dt}{dI} = \frac{500\times20\times10^{-3}}{5} = 2\text{ H}$.

Final answer: 2 H

Answer (b)

Formula used: rms and peak values: rms = peak/sqrt(2) with rms = 5 A, so peak = 7.071 A

(1) Peak value $I_0 = \sqrt{2}\,I_{rms} = \sqrt2\times5 = 7.07\text{ A}$. (2) A direct current has a constant direction (and magnitude), whereas an alternating current changes its direction periodically (and its magnitude varies with time).
20234 questions
1 mark · Short answerOpen: What is meant by “Motional emf”?

Answer the following.

What is meant by “Motional emf”?
Show answer

Answer

Motional emf is the emf induced across the ends of a conductor because of its motion in a magnetic field ($\epsilon = Blv$ for a rod moving perpendicular to the field).
2 marks · Short answerOpen: When an electric current is passed through a wire or a coil, a magnetic field…

Answer the following.

When an electric current is passed through a wire or a coil, a magnetic field is produced. Is the reverse phenomenon possible i.e., can a magnetic field produce an electric current? Explain with the help of an appropriate example.
Show answer

Answer

Yes, a changing magnetic field can produce an electric current; this is electromagnetic induction. Example: when a bar magnet is moved towards or away from a coil connected to a galvanometer, the magnetic flux linked with the coil changes, an emf is induced and the galvanometer deflects; the deflection stops when the magnet is at rest.
2 marks · Short answerOpen: Explain why a blue coloured spark is often seen in a switch when a circuit…

Answer the following.

Explain why a blue coloured spark is often seen in a switch when a circuit containing an electric iron/geyser is switched off.
Show answer

Answer

On switching off, the current in the inductive load falls very rapidly, so a large emf $\left(\varepsilon=-L\frac{dI}{dt}\right)$ is induced across the switch gap. This large emf ionises the air in the gap and produces a spark; the excited air molecules emit blue light.
5 marks · NumericalOpen: Figure 4 below shows two thick metallic rails CD and GH kept parallel to each…

Solve the following.

Figure 4 below shows two thick metallic rails CD and GH kept parallel to each other $0\cdot8\text{ m}$ apart. They are joined to each other by a resistance wire R having a resistance of $5\,\Omega$. A thick metallic rod PQ rests on the rails. There is a uniform magnetic field $B = 0\cdot2\text{ T}$, which is perpendicular to the plane of the rails, pointing into the paper.
Figure for this question
(a)[2.5]
Calculate magnitude and direction of the current induced in the rod PQ if it is moved towards right with a constant velocity $v = 36\text{ km/hr}$.
(b)[2.5]
The rod PQ is now made to perform simple harmonic motion with a frequency of $3\text{ Hz}$ and an amplitude of $4\text{ cm}$. Calculate the maximum value of the emf induced in the rod.
Show answer

Answer (a)

Formulas used: Emf across a rod moving through a field: emf = B*l*v with B = 0.2 T, l = 0.8 m, v = 10 m s^-1, so emf = 1.6 V Ohm's law: V = I*R with R = 5 ohm, V = 1.6 V, so I = 0.32 A

Given: $B=0.2\text{ T}$, $l=0.8\text{ m}$, $v=36\text{ km h}^{-1}=10\text{ m s}^{-1}$, $R=5\,\Omega$. Induced emf $\varepsilon=Blv=0.2\times0.8\times10=1.6\text{ V}$; current $I=\frac{\varepsilon}{R}=\frac{1.6}{5}=0.32\text{ A}$. Direction: by Fleming's right-hand rule (or Lenz's law, as the enclosed flux into the paper increases) the induced current flows from Q to P in the rod, and then round the loop P to D, through R to G and back to Q, i.e. anticlockwise.

Final answer: 0.32 A

Answer (b)

Formula used: Emf across a rod moving through a field: emf = B*l*v with B = 0.2 T, l = 0.8 m, v = 0.754 m s^-1, so emf = 0.121 V

For SHM $x=a\sin\omega t$, the maximum speed is $v_{max}=a\omega=a\times2\pi f=0.04\times2\pi\times3=0.754\text{ m s}^{-1}$. Maximum emf $\varepsilon_{max}=Blv_{max}=0.2\times0.8\times0.754=0.121\text{ V}$.

Final answer: 0.121 V

20222 questions
2 marks · Case basedOpen: A metallic rod CD rests on a thick metallic wire PQRS with arms PQ and RS…

Study the information given and answer the questions that follow.

A metallic rod CD rests on a thick metallic wire PQRS with arms PQ and RS parallel to each other, at a distance $l = 50\text{ cm}$, as shown in figure 13 below. A uniform magnetic field $B = 0.1\text{ T}$ acts perpendicular to the plane of this paper, pointing inwards into the plane (i.e. away from the reader). The rod is now made to slide towards right, with a constant velocity of $v = 5.0\text{ m/s}$.
Figure for this question
(i)[1]
How much emf is induced between the two ends of the rod CD?
  • (a)$25.0\text{ V}$
  • (b)$0.25\text{ V}$
  • (c)$2.50\text{ V}$
  • (d)$.025\text{ V}$
(ii)[1]
What is the direction in which the induced current flows?
  • (a)Along ‘CQRDC’
  • (b)Along the direction of motion of the conductor
  • (c)Along ‘CDRQC’
  • (d)Against the direction of motion of the conductor
Show answer

Answer (i)

Correct option: (b)

Answer: (b) $0.25\text{ V}$ $\varepsilon = Blv = 0.1\times0.50\times5.0 = 0.25\text{ V}$.

Answer (ii)

Correct option: (a)

Answer: (a) Along 'CQRDC' The flux into the page through loop CQRD increases as the rod moves right, so by Lenz's law the induced current is anticlockwise, i.e. C to Q to R to D to C (Fleming's right-hand rule gives D to C in the rod).
2 marks · Case basedOpen: Study the diagram given below: The direction of the current at end ‘P’ will be…

Study the information given and answer the questions that follow.

Study the diagram given below:
Figure for this question
(i)[1]
The direction of the current at end ‘P’ will be:
  • (a)Anti clockwise
  • (b)Clockwise
  • (c)Towards the magnet
  • (d)away from the magnet
(ii)[1]
The magnetic poles induced at the end ‘Q’ of the coil will be:
  • (a)North pole
  • (b)South pole
  • (c)Anti clockwise
  • (d)No pole
Show answer

Answer (i)

Correct option: (a)

Answer: (a) Anti clockwise The N pole of the magnet approaches end P, so by Lenz's law end P becomes a north pole to oppose the approach; current seen from the magnet's side must be anticlockwise.

Answer (ii)

Correct option: (b)

Answer: (b) South pole End P of the coil is a north pole, so the other end Q is a south pole.
20201 question
2 marks · NumericalOpen: Figure 1 below shows a metallic rod MN of length l = 80 cm, kept in a uniform…

Solve the following.

Figure 1 below shows a metallic rod MN of length $l = 80\text{ cm}$, kept in a uniform magnetic field of flux density $B = 0\cdot5\text{ T}$, on two parallel metallic rails P and Q. Calculate the emf that will be induced between its two ends, when it is moved towards right with a constant velocity $v$ of $36\text{ km/hr}$.
Figure for this question
Show answer

Answer

Formula used: Emf across a rod moving through a field: emf = B*l*v with B = 0.5 T, l = 0.8 m, v = 10 m s^-1, so emf = 4 V

Given: $l=80\ \text{cm}=0.8\ \text{m}$, $B=0.5\ \text{T}$, $v=36\ \text{km/hr}=10\ \text{m s}^{-1}$. Motional emf: $\varepsilon=Blv=0.5\times0.8\times10\ \text{V}$

Final answer: 4 V

About Electromagnetic Induction

Electromagnetic Induction is a chapter of the Electromagnetic Induction and Alternating Currents unit of the ISC Class 12 Physics syllabus. The syllabus gives 16 of the 70 theory marks to Magnetic Effects of Current and Magnetism, Electromagnetic Induction and Alternating Currents together.

The syllabus lists these topics: Faraday's laws, Lenz's law, Motional EMF, Eddy currents, Self-induction and self-inductance, Mutual induction and mutual inductance and Transformer.

Prashnika has 24 past-paper questions on Electromagnetic Induction, from papers of 2018-2027, asked in 8 different years. By kind: Short answer (14), Numerical (8) and Case based (2). They carry between 1 and 5 marks, and most are worth 1 mark.

To practise, use the paper generator, which can build a practice paper from this chapter.

Common questions

What topics are in Electromagnetic Induction in ISC Class 12 Physics?

The syllabus lists Faraday's laws, Lenz's law, Motional EMF, Eddy currents, Self-induction and self-inductance, Mutual induction and mutual inductance and Transformer.

How many questions on Electromagnetic Induction are in ISC Class 12 Physics past papers?

Prashnika has 24 questions on Electromagnetic Induction, from papers of 2018-2027 (board, specimen, improvement and practice papers together).

What kinds of questions are asked on Electromagnetic Induction?

By kind: Short answer (14), Numerical (8) and Case based (2).

Questions on other pages on Electromagnetic Induction