Prashnikaप्रश्निका
Code
About
PhysicsBoardClass 12

ISC Physics 2026 Question Paper with Answers

The ISC Physics 2026 Question Paper for Class 12: all 42 questions, 70 marks in all, in printed order and in full. It is free to download: tap "Show answer" under a question to see its answer, or use the download button to save the questions as a PDF, with or without answers; "Print this paper" below prints it as it was set.

42questions
70marks
14chapters
Q1(A)(i)1 mark · MCQOpen: A fish called an electric eel can generate a voltage up to 800V. If it can…

Choose the correct option.

A fish called an electric eel can generate a voltage up to 800V. If it can supply a current of 5mA, the maximum power it can deliver is:
  • (a)4000W
  • (b)400W
  • (c)40W
  • (d)4W
Show answer

Answer

Correct option: (d)

Answer: (d) 4W Power is given by $P = VI = 800\text{ V} \times 5 \times 10^{-3}\text{ A} = 4\text{ W}$.
Q1(A)(ii)1 mark · MCQOpen: A collimated beam of protons is travelling with a constant velocity along…

Choose the correct option.

A collimated beam of protons is travelling with a constant velocity along X-axis. There is a current carrying solenoid whose axis is also X-axis. If the beam now enters the solenoid along its axis, it will:
  • (a)describe a circular path.
  • (b)get deflected along Z-axis.
  • (c)get deflected along Y-axis.
  • (d)continue to travel undeflected.
Show answer

Answer

Correct option: (d)

Answer: (d) continue to travel undeflected. Inside the solenoid, the magnetic field is directed along its axis (X-axis). Since the velocity of the protons is parallel to the magnetic field ($\theta = 0^\circ$), the magnetic Lorentz force $F = qvB\sin 0^\circ = 0$, so the beam continues undeflected.
Q1(A)(iii)1 mark · MCQOpen: An electron, a proton, a deuteron and an alpha particle are all accelerated…

Choose the correct option.

An electron, a proton, a deuteron and an alpha particle are all accelerated from rest through the same potential difference. Which one will have the maximum de Broglie wavelength?
  • (a)Proton
  • (b)Deuteron
  • (c)Electron
  • (d)Alpha particle
Show answer

Answer

Correct option: (c)

Answer: (c) Electron The de Broglie wavelength is given by $\lambda = \frac{h}{\sqrt{2mqV}}$. For the same potential difference $V$, $\lambda \propto \frac{1}{\sqrt{mq}}$. Since the electron has the smallest mass, the product $mq$ is smallest, so the electron has the maximum de Broglie wavelength.
Q1(A)(iv)1 mark · MCQOpen: Magnetic susceptibility ( χ ) of a material is found to decrease with the rise…

Choose the correct option.

Magnetic susceptibility ( $\chi$ ) of a material is found to decrease with the rise in its temperature. The material is:
  • (a)diamagnetic.
  • (b)paramagnetic.
  • (c)ferromagnetic.
  • (d)not magnetic.
Show answer

Answer

Correct option: (b)

Answer: (b) paramagnetic. According to Curie's Law, the magnetic susceptibility of a paramagnetic material is inversely proportional to its absolute temperature ($\chi \propto \frac{1}{T}$), so $\chi$ decreases as temperature rises.
Q1(A)(v)1 mark · MCQOpen: When a p-n junction diode is forward-biased

Choose the correct option.

When a p-n junction diode is forward-biased
  • (a)it acts as an insulator and no current flows through it.
  • (b)it offers a low resistance and a large current flows through it.
  • (c)it offers a high resistance and a small current flows through it.
  • (d)the width of depletion region increases.
Show answer

Answer

Correct option: (b)

Answer: (b) it offers a low resistance and a large current flows through it. In forward bias, the applied voltage opposes the barrier potential and reduces the width of the depletion region, so the diode offers low resistance and allows a large current to flow.
Q1(A)(vi)1 mark · MCQOpen: When a biconvex lens of glass of refractive index 1.6 was dipped in a certain…

Choose the correct option.

When a biconvex lens of glass of refractive index 1.6 was dipped in a certain transparent liquid, it was found to behave like a plane sheet of glass. So, the refractive index of the liquid is:
  • (a)1.0
  • (b)1.4
  • (c)1.5
  • (d)1.6
Show answer

Answer

Correct option: (d)

Answer: (d) 1.6 A lens behaves like a plane glass sheet ($f = \infty$) when its refractive index equals that of the surrounding liquid ($\mu_l = \mu_g$). Therefore, $\mu_l = 1.6$.
Q1(A)(vii)1 mark · Assertion-reasonOpen: In Young's double slit experiment, the first bright band for blue light is…

Study the Assertion and Reason and choose the correct option.

Assertion: In Young's double slit experiment, the first bright band for blue light is closer to the centre than the first bright band for green light.

Reason: Blue light has a longer wavelength than green light.

Given below are two statements marked, Assertion and Reason. Read the two statements and choose the correct option.
  • (a)Both Assertion and Reason are true and Reason is the correct explanation for Assertion.
  • (b)Both Assertion and Reason are true but Reason is not the correct explanation for Assertion.
  • (c)Assertion is true and Reason is false.
  • (d)Assertion is false and Reason is true.
Show answer

Answer

Correct option: (c)

Assertion is true because the position of the first bright fringe is $y_1 = \frac{\lambda D}{d}$, and since $\lambda_{\text{blue}} < \lambda_{\text{green}}$, $y_{1,\text{blue}} < y_{1,\text{green}}$. Reason is false because blue light has a shorter wavelength than green light, not longer. Answer: (c)
Q1(B)(i)1 mark · NumericalOpen: Calculate the momentum of a photon having an energy of 4·8×10⁻¹⁹ J.

Solve the following.

Calculate the momentum of a photon having an energy of $4\cdot8\times10^{-19}\text{ J}.$
Show answer

Answer

The momentum of a photon is related to its energy by: $p = \frac{E}{c}$ Substituting the given values: $p = \frac{4\cdot8 \times 10^{-19}\text{ J}}{3 \times 10^{8}\text{ m s}^{-1}} = 1\cdot6 \times 10^{-27}\text{ kg m s}^{-1}$

Final answer: $1.6 \times 10^{-27}$ $\text{kg m s}^{-1}$

Q1(B)(ii)1 mark · Short answerOpen: What is motional emf?

Answer the following.

What is motional emf?
Show answer

Answer

Motional emf is the electromotive force (emf) induced across the ends of a conductor as a result of its motion through a magnetic field.
Q1(B)(iii)1 mark · NumericalOpen: Calculate work done in moving a point charge 'q' through a distance 'd' along…

Solve the following.

Calculate work done in moving a point charge 'q' through a distance 'd' along perpendicular bisector of an electric dipole, which consists of two-point charges -Q and +Q separated by a distance 'L'.
Show answer

Answer

Formula used: Work done moving a charge through a potential difference: W = q*V with V = 0 V, q = 1 C, so W = 0 J

Every point on the perpendicular bisector (equatorial line) of a dipole is equidistant from $+Q$ and $-Q$, so the potential there is $V=\frac{kQ}{r}-\frac{kQ}{r}=0$. The line is an equipotential, so the potential difference between its two points is zero. $W=q\,\Delta V=q(0-0)=0$

Final answer: 0 J

Q1(B)(iv)1 mark · DrawingOpen: Draw the symbol of a Zener diode.

Draw the following.

Draw the symbol of a Zener diode.

Draw: Symbol of a Zener diode

Show answer

Answer

The symbol of a Zener diode consists of a triangle representing the anode pointing towards a bar representing the cathode. The cathode bar has bent ends at both edges (resembling the letter 'Z') to distinguish it from an ordinary p-n junction diode.
Diagram for this answer
Q1(B)(v)1 mark · NumericalOpen: A thin convex lens of power 5D is kept in contact with a thin concave lens of…

Solve the following.

A thin convex lens of power 5D is kept in contact with a thin concave lens of power 8D. Calculate the focal length of the combination.
Show answer

Answer

Power of the convex lens, $P_1 = +5\text{ D}$ Power of the concave lens, $P_2 = -8\text{ D}$ Equivalent power of the combination: $P = P_1 + P_2 = +5\text{ D} + (-8\text{ D}) = -3\text{ D}$ Focal length of the combination: $F = \frac{1}{P} = \frac{1}{-3\text{ D}} = -\frac{1}{3}\text{ m} \approx -0\cdot333\text{ m} = -33\cdot3\text{ cm}$

Final answer: -0.333 m

Q1(B)(vi)1 mark · One wordOpen: The image below shows a compound microscope. Which one of the two lenses L₁ or…

Answer in one word.

The image below shows a compound microscope. Which one of the two lenses $L_{1}$ or $L_{2}$ has a larger focal length?
Figure for this question
Show answer

Answer

Lens $L_1$ has a larger focal length. In a compound microscope, $L_1$ is the eyepiece and $L_2$ is the objective. The eyepiece has a larger focal length (and larger aperture) than the objective lens ($f_e > f_o$) to provide appropriate magnification and a comfortable field of view.
Q1(B)(vii)1 mark · NumericalOpen: Radius of the first Bohr orbit of hydrogen atom is 0.05nm. Calculate the radius…

Solve the following.

Radius of the first Bohr orbit of hydrogen atom is 0.05nm. Calculate the radius of the third orbit.
Show answer

Answer

The radius of the $n$-th Bohr orbit is given by: $r_n = n^{2} r_1$ For the third orbit ($n = 3$): $r_3 = 3^{2} \times 0\cdot05\text{ nm} = 9 \times 0\cdot05\text{ nm} = 0\cdot45\text{ nm}$

Final answer: 0.45 nm

Q2(i)2 marks · NumericalOpen: Four-point charges Q₁=+17·7μ C, Q₂=-8·85μ C, Q₃=-17·7μ C and Q₄=35·4μ C are…

Solve the following.

Four-point charges $Q_{1}=+17\cdot7\mu C,$ $Q_{2}=-8\cdot85\mu C,$ $Q_{3}=-17\cdot7\mu C$ and $Q_{4}=35\cdot4\mu C$ are kept as shown in Figure 1 below. Calculate electric flux emanating from the closed surface S.
Figure for this question
Show answer

Answer

According to Gauss's Law, the electric flux emanating from a closed surface depends only on the net charge enclosed within it: $\Phi = \frac{q_{\text{enclosed}}}{\epsilon_{0}}$ From Figure 1, the charges enclosed within surface S are $Q_1$ and $Q_2$: $q_{\text{enclosed}} = Q_{1} + Q_{2} = 17\cdot7\,\mu\text{C} + (-8\cdot85\,\mu\text{C}) = +8\cdot85\,\mu\text{C} = 8\cdot85 \times 10^{-6}\text{ C}$ Given $\epsilon_{0} = 8\cdot85 \times 10^{-12}\text{ F m}^{-1}$: $\Phi = \frac{8\cdot85 \times 10^{-6}\text{ C}}{8\cdot85 \times 10^{-12}\text{ F m}^{-1}} = 1 \times 10^{6}\text{ N m}^{2}\text{C}^{-1}$

Final answer: $1 \times 10^{6}$ $\text{N m}^{2} \text{C}^{-1}$

Q2(ii)2 marks · NumericalOpen: Find the value of current 'I' in Figure 2 given below. State the conservation…

Solve the following.

Figure for this question
(a)[1]
Find the value of current 'I' in Figure 2 given below.
(b)[1]
State the conservation principle on which your calculation is based.
Show answer

Answer (a)

By Kirchhoff's First Law (junction rule): At the right junction, total current leaving = $7\text{ A} + 5\text{ A} + 3\text{ A} = 15\text{ A}$. Thus, the current entering the right junction from the middle wire is $15\text{ A}$. At the left junction, total current entering = total current leaving: $8\text{ A} + I = 15\text{ A}$ $I = 15\text{ A} - 8\text{ A} = 7\text{ A}$

Final answer: 7 A

Answer (b)

The calculation is based on the law of conservation of electric charge.
Q32 marks · NumericalOpen: You are provided with three identical capacitors, each of capacitance 'C'. If…

Solve the following.

You are provided with three identical capacitors, each of capacitance 'C'. If $C_{p}$ is equivalent capacitance when they are connected in parallel and $C_{s}$ is equivalent capacitance when they are connected in series, calculate the ratio $\frac{C_{s}}{C_{p}}$.
Show answer

Answer

For three identical capacitors each of capacitance $C$: When connected in parallel: $C_{p} = C + C + C = 3C$ When connected in series: $\frac{1}{C_{s}} = \frac{1}{C} + \frac{1}{C} + \frac{1}{C} = \frac{3}{C} \implies C_{s} = \frac{C}{3}$ Ratio $\frac{C_{s}}{C_{p}}$: $\frac{C_{s}}{C_{p}} = \frac{C / 3}{3C} = \frac{1}{9}$

Final answer: 1/9

Q4(i)2 marks · Short answerOpen: What is the effect of doubling the current flowing through a metallic wire on…

Answer the following.

What is the effect of doubling the current flowing through a metallic wire on:
(a)[1]
drift speed of free electrons?
(b)[1]
relaxation time of free electrons?
Show answer

Answer (a)

Drift speed $v_d$ is directly proportional to current ($I = n A e v_d \implies v_d \propto I$). Therefore, doubling the current doubles the drift speed of the free electrons.

Answer (b)

Relaxation time depends only on the temperature and nature of the material, not on the current. Therefore, doubling the current has no effect on the relaxation time of free electrons (assuming temperature remains constant).
Q4(ii)2 marks · DrawingOpen: Draw a labelled circuit diagram of a potentiometer used to compare emfs of two…

Answer the following.

Draw a labelled circuit diagram of a potentiometer used to compare emfs of two given cells X and Y. (Procedure and formula are NOT required.)

Draw: labelled circuit diagram of a potentiometer used to compare emfs of two given cells X and Y

Must show: potentiometer wire, driver cell or battery, rheostat, two cells X and Y, two-way key, galvanometer, jockey

Show answer

Answer

A correct circuit diagram shows the primary circuit with potentiometer wire AB connected in series with an accumulator (driver battery), a key, and a rheostat. In the secondary circuit, the positive terminals of both cells X and Y are connected to end A (high potential end, same as the positive terminal of the driver battery), while their negative terminals connect to the two outer terminals of a two-way key. The central terminal of the two-way key connects via a galvanometer to a sliding jockey that contacts wire AB.
Diagram for this answer
Q5(i)1 mark · Short answerOpen: Write an expression of Biot-Savart law in vector form.

Answer the following.

Write an expression of Biot-Savart law in vector form.
Show answer

Answer

The Biot-Savart law in vector form for a current element $I d\vec{l}$ at position vector $\vec{r}$ is: $d\vec{B} = \frac{\mu_{0}}{4\pi} \frac{I (d\vec{l} \times \vec{r})}{r^{3}}$ or $d\vec{B} = \frac{\mu_{0}}{4\pi} \frac{I (d\vec{l} \times \hat{r})}{r^{2}}$
Q5(ii)1 mark · Short answerOpen: State Ampere's circuital law.

Answer the following.

State Ampere's circuital law.
Show answer

Answer

Ampere's circuital law states that the line integral of magnetic field $\vec{B}$ around any closed path/loop in vacuum is equal to $\mu_{0}$ times the total current $I_{\text{enclosed}}$ threading through the area bounded by the path: $\oint \vec{B} \cdot d\vec{l} = \mu_{0} I_{\text{enclosed}}$
Q62 marks · NumericalOpen: A bi-convex lens of focal length f₁ is placed in air as shown in Figure 3(a)…

Solve the following.

A bi-convex lens of focal length $f_{1}$ is placed in air as shown in Figure 3(a) below. The radii of curvature of its first and second surfaces are R and 2R respectively. The lens is cut along the plane CD. Compare the focal length $f_{2}$ of the resulting lens shown in Figure 3(b) with that of the original lens shown in Figure 3(a).
Figure for this question
Show answer

Answer

Using the Lens Maker's Formula: $\frac{1}{f} = (\mu - 1)\left(\frac{1}{R_{1}} - \frac{1}{R_{2}}\right)$ For the original bi-convex lens (Figure 3(a)): $R_{1} = +R$ and $R_{2} = -2R$ $\frac{1}{f_{1}} = (\mu - 1)\left(\frac{1}{R} - \left(-\frac{1}{2R}\right)\right) = (\mu - 1)\frac{3}{2R}$ $f_{1} = \frac{2R}{3(\mu - 1)}$ For the cut lens (Figure 3(b)): The first surface is plane ($R_{1}' = \infty$) and the second surface has radius $R_{2}' = -2R$: $\frac{1}{f_{2}} = (\mu - 1)\left(\frac{1}{\infty} - \left(-\frac{1}{2R}\right)\right) = (\mu - 1)\frac{1}{2R}$ $f_{2} = \frac{2R}{\mu - 1}$ Comparing the focal lengths: $\frac{f_{2}}{f_{1}} = \frac{\frac{2R}{\mu - 1}}{\frac{2R}{3(\mu - 1)}} = 3 \implies f_{2} = 3f_{1}$

Final answer: 3

Q82 marks · NumericalOpen: The work functions for metals M₁ and M₂ are 1.9eV and 5.0eV respectively…

Solve the following.

The work functions for metals $M_{1}$ and $M_{2}$ are 1.9eV and 5.0eV respectively. Perform necessary calculations to find out which metal emits photoelectrons, when monochromatic light of wavelength 410nm is incident on them.
Show answer

Answer

Energy of the incident photon: $E = \frac{hc}{\lambda}$ Given $h = 6\cdot6 \times 10^{-34}\text{ J s}$, $c = 3 \times 10^{8}\text{ m s}^{-1}$, and $\lambda = 410\text{ nm} = 410 \times 10^{-9}\text{ m}$: $E = \frac{6\cdot6 \times 10^{-34}\text{ J s} \times 3 \times 10^{8}\text{ m s}^{-1}}{410 \times 10^{-9}\text{ m}} = 4\cdot83 \times 10^{-19}\text{ J}$ Converting to electron-volts ($1\text{ eV} = 1\cdot6 \times 10^{-19}\text{ J}$): $E = \frac{4\cdot83 \times 10^{-19}\text{ J}}{1\cdot6 \times 10^{-19}\text{ J eV}^{-1}} \approx 3\cdot02\text{ eV}$ Photoelectric emission occurs only when $E \ge W_{0}$: For metal $M_{1}$: $E = 3\cdot02\text{ eV} > W_{1} = 1\cdot9\text{ eV}$, hence metal $M_{1}$ will emit photoelectrons. For metal $M_{2}$: $E = 3\cdot02\text{ eV} < W_{2} = 5\cdot0\text{ eV}$, hence metal $M_{2}$ will not emit photoelectrons.

Final answer: Metal $M_1$

Q93 marks · DerivationOpen: Show that the intensity of electric field at a point in end on position i.e…

Derive the following.

Show that the intensity of electric field at a point in end on position i.e., axial position of an electric dipole is given by: $E = (\frac{1}{4\pi\epsilon_{0}})\frac{2pr}{(r^{2}-l^{2})^{2}}$ where the terms have their usual meaning.

Given: Electric dipole consisting of charges $-q$ and $+q$ separated by distance $2l$

To show: $E = (\frac{1}{4\pi\epsilon_{0}})\frac{2pr}{(r^{2}-l^{2})^{2}}$

Show answer

Answer

1. Consider an electric dipole consisting of charges $-q$ at point A and $+q$ at point B separated by a distance $2l$, with centre at O. 2. Let P be a point on the axial line at a distance $r$ from the centre O of the dipole, so the distance of P from $+q$ is $r - l$ and from $-q$ is $r + l$. 3. By Coulomb's law, the electric field at P due to $+q$ directed along BP is $E_{+} = \frac{1}{4\pi\epsilon_{0}} \frac{q}{(r - l)^{2}}$. 4. By Coulomb's law, the electric field at P due to $-q$ directed along PA is $E_{-} = \frac{1}{4\pi\epsilon_{0}} \frac{q}{(r + l)^{2}}$. 5. By the principle of superposition, the net electric field at P along the axis is $E = E_{+} - E_{-}$. 6. Substituting the expressions for the electric fields, $E = \frac{q}{4\pi\epsilon_{0}} \left[ \frac{1}{(r - l)^{2}} - \frac{1}{(r + l)^{2}} \right]$. 7. Finding the common denominator, $E = \frac{q}{4\pi\epsilon_{0}} \left[ \frac{(r + l)^{2} - (r - l)^{2}}{(r^{2} - l^{2})^{2}} \right]$. 8. Expanding the numerator $(r + l)^{2} - (r - l)^{2} = 4rl$, we get $E = \frac{q}{4\pi\epsilon_{0}} \frac{4rl}{(r^{2} - l^{2})^{2}}$. 9. Using the definition of electric dipole moment $p = q \times 2l$, rewrite the numerator as $q(4rl) = 2(q \times 2l)r = 2pr$. 10. $E = (\frac{1}{4\pi\epsilon_{0}})\frac{2pr}{(r^{2}-l^{2})^{2}}$
  1. 1. Consider an electric dipole consisting of charges $-q$ at point A and $+q$ at point B separated by a distance $2l$, with centre at O.
  2. 2. Let P be a point on the axial line at a distance $r$ from the centre O of the dipole, so the distance of P from $+q$ is $r - l$ and from $-q$ is $r + l$.
  3. 3. By Coulomb's law, the electric field at P due to $+q$ directed along BP is $E_{+} = \frac{1}{4\pi\epsilon_{0}} \frac{q}{(r - l)^{2}}$.
  4. 4. By Coulomb's law, the electric field at P due to $-q$ directed along PA is $E_{-} = \frac{1}{4\pi\epsilon_{0}} \frac{q}{(r + l)^{2}}$.
  5. 5. By the principle of superposition, the net electric field at P along the axis is $E = E_{+} - E_{-}$.
  6. 6. Substituting the expressions for the electric fields, $E = \frac{q}{4\pi\epsilon_{0}} \left[ \frac{1}{(r - l)^{2}} - \frac{1}{(r + l)^{2}} \right]$.
  7. 7. Finding the common denominator, $E = \frac{q}{4\pi\epsilon_{0}} \left[ \frac{(r + l)^{2} - (r - l)^{2}}{(r^{2} - l^{2})^{2}} \right]$.
  8. 8. Expanding the numerator $(r + l)^{2} - (r - l)^{2} = 4rl$, we get $E = \frac{q}{4\pi\epsilon_{0}} \frac{4rl}{(r^{2} - l^{2})^{2}}$.
  9. 9. Using the definition of electric dipole moment $p = q \times 2l$, rewrite the numerator as $q(4rl) = 2(q \times 2l)r = 2pr$.
  10. 10. $E = (\frac{1}{4\pi\epsilon_{0}})\frac{2pr}{(r^{2}-l^{2})^{2}}$
Q10(i)3 marks · NumericalOpen: In the circuit shown in Figure 4 below, how much resistance should be connected…

Solve the following.

In the circuit shown in Figure 4 below, how much resistance should be connected to a $10\Omega$ resistor so that the points M and N are at the same potential?
Figure for this question
Show answer

Answer

For points M and N to be at the same potential ($V_M = V_N$), the Wheatstone bridge must be balanced: $\frac{P}{Q} = \frac{R}{S_{\text{eff}}}$ Given $P = 3\,\Omega$, $Q = 6\,\Omega$, and $R = 4\,\Omega$: $\frac{3}{6} = \frac{4}{S_{\text{eff}}} \implies \frac{1}{2} = \frac{4}{S_{\text{eff}}} \implies S_{\text{eff}} = 8\,\Omega$ Since the required effective resistance ($8\,\Omega$) is less than $10\,\Omega$, a resistance $X$ must be connected in parallel with the $10\,\Omega$ resistor: $\frac{1}{S_{\text{eff}}} = \frac{1}{10\,\Omega} + \frac{1}{X}$ $\frac{1}{8\,\Omega} = \frac{1}{10\,\Omega} + \frac{1}{X}$ $\frac{1}{X} = \frac{1}{8} - \frac{1}{10} = \frac{5 - 4}{40} = \frac{1}{40\,\Omega}$ $X = 40\,\Omega$ in parallel.

Final answer: 40 $\Omega$

Q10(ii)3 marks · NumericalOpen: Figure 5 below shows a battery consisting of three cells. Their emfs and…

Solve the following.

Figure 5 below shows a battery consisting of three cells. Their emfs and internal resistances are also shown. Calculate:
Figure for this question
(a)[1.5]
emf of the battery.
(b)[1.5]
internal resistance of the battery.
Show answer

Answer (a)

The two cells in the upper branch are connected in series aiding each other: $E_{\text{top}} = E_1 + E_2 = 2\text{ V} + 4\text{ V} = 6\text{ V}$ $r_{\text{top}} = r_1 + r_2 = 1\,\Omega + 3\,\Omega = 4\,\Omega$ The lower branch has emf $E_{\text{bottom}} = 6\text{ V}$ and internal resistance $r_{\text{bottom}} = 12\,\Omega$. The two branches are in parallel with like terminals connected together. The equivalent emf of the battery is: $E = \frac{\frac{E_{\text{top}}}{r_{\text{top}}} + \frac{E_{\text{bottom}}}{r_{\text{bottom}}}}{\frac{1}{r_{\text{top}}} + \frac{1}{r_{\text{bottom}}}} = \frac{\frac{6}{4} + \frac{6}{12}}{\frac{1}{4} + \frac{1}{12}} = 6\text{ V}$

Final answer: 6 V

Answer (b)

The equivalent internal resistance of the two parallel branches is: $\frac{1}{r} = \frac{1}{r_{\text{top}}} + \frac{1}{r_{\text{bottom}}} = \frac{1}{4\,\Omega} + \frac{1}{12\,\Omega} = \frac{3 + 1}{12\,\Omega} = \frac{4}{12\,\Omega} = \frac{1}{3\,\Omega}$ $r = 3\,\Omega$

Final answer: 3 $\Omega$

Q11(i)3 marks · DerivationOpen: Obtain an expression for magnetic field (B) at the centre of a circular coil…

Answer the following.

Obtain an expression for magnetic field (B) at the centre of a circular coil having 'n' turns of radius 'R' when it is carrying a current 'I'.

Given: A circular coil of radius R carrying current I, with n turns

To show: $B = \frac{\mu_{0} n I}{2R}$

Show answer

Answer

1. Consider a circular coil of radius R carrying current I, consisting of n turns. 2. Take a small current element $d\vec{l}$ on the circumference of a single turn of the coil. 3. The position vector $\vec{r}$ from the element to the centre has magnitude $R$, and since the element is along the tangent, $d\vec{l}$ is perpendicular to $\vec{r}$ ($\theta = 90^\circ$). 4. By Biot-Savart Law, the magnetic field at the centre due to this element is $dB = \frac{\mu_0}{4\pi} \frac{I dl \sin 90^\circ}{R^2} = \frac{\mu_0}{4\pi} \frac{I dl}{R^2}$. 5. By the right-hand grip rule, the magnetic fields due to all current elements point in the same direction perpendicular to the plane of the coil. 6. Integrating over the entire circumference of one circular turn gives $B_1 = \oint dB = \frac{\mu_0 I}{4\pi R^2} \oint dl$. 7. Since the total circumference of one turn is $\oint dl = 2\pi R$, the magnetic field for a single turn is $B_1 = \frac{\mu_0 I}{4\pi R^2} (2\pi R) = \frac{\mu_0 I}{2R}$. 8. For a coil consisting of n turns, the magnetic fields of all turns add up along the same direction, giving total field $B = n B_1$. 9. $B = \frac{\mu_{0} n I}{2R}$
  1. 1. Consider a circular coil of radius R carrying current I, consisting of n turns.
  2. 2. Take a small current element $d\vec{l}$ on the circumference of a single turn of the coil.
  3. 3. The position vector $\vec{r}$ from the element to the centre has magnitude $R$, and since the element is along the tangent, $d\vec{l}$ is perpendicular to $\vec{r}$ ($\theta = 90^\circ$).
  4. 4. By Biot-Savart Law, the magnetic field at the centre due to this element is $dB = \frac{\mu_0}{4\pi} \frac{I dl \sin 90^\circ}{R^2} = \frac{\mu_0}{4\pi} \frac{I dl}{R^2}$.
  5. 5. By the right-hand grip rule, the magnetic fields due to all current elements point in the same direction perpendicular to the plane of the coil.
  6. 6. Integrating over the entire circumference of one circular turn gives $B_1 = \oint dB = \frac{\mu_0 I}{4\pi R^2} \oint dl$.
  7. 7. Since the total circumference of one turn is $\oint dl = 2\pi R$, the magnetic field for a single turn is $B_1 = \frac{\mu_0 I}{4\pi R^2} (2\pi R) = \frac{\mu_0 I}{2R}$.
  8. 8. For a coil consisting of n turns, the magnetic fields of all turns add up along the same direction, giving total field $B = n B_1$.
  9. 9. $B = \frac{\mu_{0} n I}{2R}$
Q11(ii)3 marks · NumericalOpen: Two moving coil galvanometers G₁ and G₂ are identical except for the following…

Answer the following.

(a)[2]
Two moving coil galvanometers $G_{1}$ and $G_{2}$ are identical except for the following features:
Features$G_{1}$$G_{2}$
Number of turns5060
Area of the coil$30\text{ cm}^{2}$$40\text{ cm}^{2}$
Resistance of the coil$5\,\Omega$$6\,\Omega$
Perform calculations to determine which galvanometer has greater current sensitivity.
(b)[1]
In a moving coil galvanometer, how is magnetic field made radial?
Show answer

Answer (a)

Current sensitivity of a moving coil galvanometer is given by: $I_{s} = \frac{\theta}{I} = \frac{NAB}{k}$ Since both galvanometers are identical in other respects, $B$ and $k$ are the same for both. Thus, $I_{s} \propto NA$. For galvanometer $G_{1}$: $N_{1} A_{1} = 50 \times 30\text{ cm}^{2} = 1500\text{ turns}\cdot\text{cm}^{2}$ For galvanometer $G_{2}$: $N_{2} A_{2} = 60 \times 40\text{ cm}^{2} = 2400\text{ turns}\cdot\text{cm}^{2}$ Since $N_{2}A_{2} > N_{1}A_{1}$, galvanometer $G_{2}$ has greater current sensitivity.

Final answer: $G_2$

Answer (b)

The magnetic field is made radial by using concave-shaped (cylindrical) magnetic pole pieces and placing a cylindrical soft iron core symmetrically between them.
Q123 marks · Short answerOpen: Figure 6 below shows a long straight conductor X carrying a current I₁. A point…

Answer the following.

Figure 6 below shows a long straight conductor X carrying a current $I_{1}$. A point P is at a perpendicular distance '$r_{1}$' from it.
Figure for this question
(i)[1.5]
How much force conductor X exerts on a short conductor Y of length 'l' which is carrying a current 'I' and is kept at point P parallel to the conductor X?
(ii)[1.5]
Another long wire Z carrying a current $I_{2}$ is now kept parallel to X and Y at a distance '$r_{2}$' from Y such that the conductor Y remains at rest. Obtain the relation between the currents $I_{1}$ and $I_{2}$.
Show answer

Answer (i)

The magnetic field at point P produced by long conductor X carrying current $I_1$ is: $B_1 = \frac{\mu_0 I_1}{2\pi r_1}$ The magnitude of force exerted on conductor Y of length $l$ carrying current $I$ is: $F = I l B_1 = \frac{\mu_0 I_1 I l}{2\pi r_1}$ The force is attractive, directed towards conductor X.

Answer (ii)

For conductor Y to remain at rest, the attractive force exerted by conductor X on Y (directed towards X) must be equal and opposite to the attractive force exerted by conductor Z on Y (directed towards Z): $F_{XY} = F_{ZY}$ $\frac{\mu_0 I_1 I l}{2\pi r_1} = \frac{\mu_0 I_2 I l}{2\pi r_2}$ Cancelling common terms $\frac{\mu_0 I l}{2\pi}$: $\frac{I_1}{r_1} = \frac{I_2}{r_2} \implies \frac{I_1}{I_2} = \frac{r_1}{r_2}$
Q133 marks · NumericalOpen: A monochromatic ray of light incident on one refracting surface of an…

Solve the following.

A monochromatic ray of light incident on one refracting surface of an equilateral prism, suffers a deviation as shown in the Figure 7 below:
Figure for this question
(i)[2]
Calculate the refractive index of the material of the prism.
(ii)[1]
What is meant by dispersive power of a transparent material?
Show answer

Answer (i)

From Figure 7, the refracted ray inside the equilateral prism is parallel to the base, which means the prism is in the minimum deviation position ($\delta_m = 40^\circ$). For an equilateral prism, angle of prism $A = 60^\circ$. Using the prism formula: $\mu = \frac{\sin\left(\frac{A + \delta_m}{2}\right)}{\sin\left(\frac{A}{2}\right)}$ $\mu = \frac{\sin\left(\frac{60^\circ + 40^\circ}{2}\right)}{\sin\left(\frac{60^\circ}{2}\right)} = \frac{\sin 50^\circ}{\sin 30^\circ} = \frac{0\cdot766}{0\cdot5} = 1\cdot532 \approx 1\cdot53$

Final answer: 1.53

Answer (ii)

Dispersive power ($\omega$) of a transparent material is defined as the ratio of angular dispersion between two extreme colours (violet and red) to the mean deviation produced by a thin prism of that material: $\omega = \frac{\delta_V - \delta_R}{\delta_Y} = \frac{\mu_V - \mu_R}{\mu_Y - 1}$
Q143 marks · DrawingOpen: Draw a labelled diagram of an astronomical telescope when its final image lies…

Draw the following.

Draw a labelled diagram of an astronomical telescope when its final image lies at infinity.

Draw: ray diagram of an astronomical telescope when its final image lies at infinity (normal adjustment)

Must show: objective lens, eyepiece, parallel rays from distant object, intermediate real, inverted image at focus Fo and Fe, parallel rays emerging from eyepiece

Show answer

Answer

A labelled ray diagram of an astronomical telescope in normal adjustment consists of a large-aperture, long-focal-length objective lens and a smaller eyepiece separated by $L = f_o + f_e$. Parallel rays from a distant object enter the objective at angle $\alpha$ and form a real, inverted, diminished intermediate image $A'B'$ at the common focal plane ($F_o$ coincides with $F_e$). The rays then refract through the eyepiece and emerge as parallel rays entering the observer's eye at angle $\beta$, forming the final inverted image at infinity.
Diagram for this answer
Q153 marks · Short answerOpen: Kabir and Neha conducted experiments on light as part of their school project…

Answer the following.

Kabir and Neha conducted experiments on light as part of their school project. Both of them worked with the same source of monochromatic yellow light. Both obtained patterns on the screen which consisted of alternate bright and dark bands. The images below depict their results.
Figure for this question
(i)[1]
Identify the phenomenon observed by Neha.
(ii)[1]
The teacher asked Kabir to replace monochromatic yellow light with white light. What would be Kabir's observation now?
(iii)[1]
What conclusion would be drawn by Kabir and Neha about the nature of light?
Show answer

Answer (i)

Neha observed the phenomenon of diffraction of light (single-slit diffraction).

Answer (ii)

Kabir will observe a central white fringe surrounded on either side by a few coloured fringes (with the violet fringe closest to the center and red farther out), which gradually merge into uniform illumination.

Answer (iii)

Kabir and Neha conclude that light exhibits wave nature.
Q163 marks · DerivationOpen: Using Huygen's wave theory and a labelled diagram, show that angle of…

Derive the following.

Using Huygen's wave theory and a labelled diagram, show that angle of reflection (r) is equal to angle of incidence (i).

Given: A plane wavefront incident on a reflecting surface at angle i

To show: $r = i$

Show answer

Answer

Consider a plane wavefront AB incident obliquely on a plane reflecting surface MN. End A touches the surface first; the disturbance at B still has to travel the distance BC to reach the surface at C. If it takes time t, then $BC = vt$, where v is the speed of light in the medium. In the same time t, the secondary wavelet from A spreads out as a hemisphere of radius $AD = vt$. The tangent drawn from C to this wavelet touches it at D, and CD is the reflected wavefront. Angle of incidence $i = \angle BAC$ (between the incident wavefront and the surface) and angle of reflection $r = \angle DCA$ (between the reflected wavefront and the surface). In triangles ABC and CDA: $\angle ABC = \angle CDA = 90^\circ$, hypotenuse AC is common, and $BC = AD = vt$. So the triangles are congruent (RHS), and $\angle BAC = \angle DCA$, i.e. $i = r$. Hence the angle of reflection is equal to the angle of incidence.
  1. The plane wavefront AB meets the reflecting surface MN first at A; the disturbance at B travels BC to reach the surface at C in time t, so $BC = vt$.
  2. In the same time t the secondary wavelet from A becomes a hemisphere of radius $AD = vt$ (Huygens' principle).
  3. The tangent from C to this wavelet touches it at D; CD is the reflected wavefront.
  4. Angle of incidence $i = \angle BAC$ and angle of reflection $r = \angle DCA$ (each wavefront makes the same angle with the surface as its ray makes with the normal).
  5. In triangles ABC and CDA: $\angle ABC = \angle CDA = 90^\circ$ (a wavefront is perpendicular to its ray), AC is common and $BC = AD = vt$.
  6. So $\triangle ABC \cong \triangle CDA$ (RHS), hence $\angle BAC = \angle DCA$, i.e. $i = r$.
Diagram for this answer
Q17(i)2 marks · Short answerOpen: The graphs below show variation of stopping potential versus frequency of…

Answer the following.

The graphs below show variation of stopping potential versus frequency of incident radiation for metals A and B. UV radiation of appropriate wavelength is allowed to fall on both the metals. Which metal will emit photoelectrons with higher maximum kinetic energy ($E_{max}$)? Give a reason.
Figure for this question
Show answer

Answer

Metal A will emit photoelectrons with higher maximum kinetic energy. Reason: From the graph, Metal A has a lower threshold frequency than Metal B ($f_{0A} < f_{0B}$), which means Metal A has a smaller work function ($W_{0} = hf_{0}$). According to Einstein's photoelectric equation, $E_{\max} = hf - W_{0}$; hence, for the same incident frequency $f$, a smaller work function results in a higher maximum kinetic energy.
Q18(i)5 marks · NumericalOpen: When a coil is connected to a 200V dc supply, the current flowing through it is…

Solve the following.

(a)(1)[1]
When a coil is connected to a 200V dc supply, the current flowing through it is found to be 1A. However, when it is connected to the 200V, 50Hz ac supply, the current is found to be 0.5A. Explain why current flowing is less when the coil is connected to an ac supply.
(a)(2)[2]
Calculate coefficient of self-inductance (L) of the coil.
(b)[2]
If the power factor in an ac circuit is 0.5, what is the phase difference between the voltage and the current in the circuit?
Show answer

Answer (a)(1)

In a dc circuit, frequency is zero, so inductive reactance is zero ($X_L = 0$) and current is opposed only by ohmic resistance $R$ ($I = \frac{V}{R}$). In an ac circuit, the alternating current produces a changing magnetic flux, giving rise to an inductive reactance $X_L = 2\pi f L$. The total opposition is impedance $Z = \sqrt{R^2 + X_L^2}$. Since $Z > R$, the current in the ac circuit is less than in the dc circuit.

Answer (a)(2)

From the dc circuit data: Resistance $R = \frac{V_{\text{dc}}}{I_{\text{dc}}} = \frac{200\text{ V}}{1\text{ A}} = 200\,\Omega$ From the ac circuit data ($f = 50\text{ Hz}$): Impedance $Z = \frac{V_{\text{ac}}}{I_{\text{ac}}} = \frac{200\text{ V}}{0\cdot5\text{ A}} = 400\,\Omega$ Inductive reactance: $X_{L} = \sqrt{Z^{2} - R^{2}} = \sqrt{400^{2} - 200^{2}} = \sqrt{120000} = 200\sqrt{3}\,\Omega \approx 346\cdot41\,\Omega$ Since $X_{L} = 2\pi f L$: $L = \frac{X_{L}}{2\pi f} = \frac{346\cdot41\,\Omega}{2 \times 3\cdot14 \times 50\text{ s}^{-1}} = \frac{346\cdot41}{314} \approx 1\cdot10\text{ H}$

Final answer: 1.10 H

Answer (b)

Power factor of an ac circuit is given by: $\cos\phi = 0\cdot5$ Therefore, the phase difference $\phi$ between voltage and current is: $\phi = \cos^{-1}(0\cdot5) = 60^{\circ} = \frac{\pi}{3}\text{ rad}$

Final answer: $60^\circ$ $^\circ$

Q18(ii)5 marks · NumericalOpen: A 70Ω resistor is connected to an ac source generating an emf 'e' given by e(V)…

Solve the following.

(a)[2]
A $70\Omega$ resistor is connected to an ac source generating an emf 'e' given by $e(V) = 495\text{ Sin}(100\pi t).$ Calculate rms value of the current ($I_{rms}$) flowing through the resistor.
(b)[2]
A 20cm length of a long iron cored solenoid has 25 turns. If the area of cross section of the solenoid is $1\times10^{-4}\text{ m}^{2}$, calculate its coefficient of self-inductance (L).
(c)[1]
State why soft iron is preferred to steel as a material for the core of a transformer.
Show answer

Answer (a)

Comparing the given alternating emf $e = 495\sin(100\pi t)$ with $e = e_{0}\sin(\omega t)$: Peak voltage, $e_{0} = 495\text{ V}$ rms voltage: $e_{\text{rms}} = \frac{e_{0}}{\sqrt{2}} = \frac{495}{\sqrt{2}} \approx 350\text{ V}$ Given resistance $R = 70\,\Omega$: $I_{\text{rms}} = \frac{e_{\text{rms}}}{R} = \frac{350\text{ V}}{70\,\Omega} = 5\text{ A}$

Final answer: 5 A

Answer (b)

The self-inductance of an iron-cored solenoid is given by: $L = \frac{\mu_{r} \mu_{0} N^{2} A}{l}$ Given: $N = 25$ $l = 20\text{ cm} = 0\cdot2\text{ m}$ $A = 1 \times 10^{-4}\text{ m}^{2}$ $\mu_{0} = 4\pi \times 10^{-7}\text{ H m}^{-1}$ $\mu_{r} = 3000$ (from constants table) Substituting the values: $L = \frac{3000 \times (4 \times 3\cdot14 \times 10^{-7}\text{ H m}^{-1}) \times (25)^{2} \times (1 \times 10^{-4}\text{ m}^{2})}{0\cdot2\text{ m}}$ $L = \frac{3000 \times 1\cdot256 \times 10^{-6} \times 625 \times 10^{-4}}{0\cdot2} \approx 1\cdot18 \times 10^{-3}\text{ H} = 1\cdot18\text{ mH}$

Final answer: $1.18 \times 10^{-3}$ H

Answer (c)

Soft iron has high magnetic permeability and a narrow hysteresis loop with low coercivity and retentivity, which minimizes hysteresis energy loss during repeated cycles of magnetization and demagnetization.
Q19(i)5 marks · GraphOpen: Draw a labelled graph showing the variation of binding energy per nucleon with…

Answer the following.

(i)[2]
Draw a labelled graph showing the variation of binding energy per nucleon with the mass number (A) of the nucleus. On it, mark the nucleus that is most stable.

Draw: graph showing the variation of binding energy per nucleon with the mass number (A) of the nucleus

(ii)[1]
What is meant by the following statement? 'Angular momentum of an orbiting electron is quantised.'
(iii)[2]
Calculate the shortest wavelength of Balmer series.
Show answer

Answer (i)

Binding energy per nucleon rises steeply for light nuclei (peaks at He-4, C-12, O-16), reaches a maximum of about 8.8 MeV at $A\approx56$ (Fe-56, the most stable nucleus), then falls slowly to about 7.6 MeV for heavy nuclei such as U-238.

Answer (ii)

It means that the orbital angular momentum ($L$) of an electron revolving around the nucleus can only take discrete values that are integral multiples of $\frac{h}{2\pi}$ ($L = mvr = \frac{nh}{2\pi}$, where $n = 1, 2, 3\ldots$), and cannot vary continuously.

Answer (iii)

Using the Rydberg formula for hydrogen spectrum: $\frac{1}{\lambda} = R_{H}\left(\frac{1}{n_{1}^{2}} - \frac{1}{n_{2}^{2}}\right)$ For the Balmer series, $n_{1} = 2$. The shortest wavelength (series limit) occurs when $n_{2} = \infty$: $\frac{1}{\lambda_{\min}} = R_{H}\left(\frac{1}{2^{2}} - \frac{1}{\infty^{2}}\right) = \frac{R_{H}}{4}$ $\lambda_{\min} = \frac{4}{R_{H}}$ Given $R_{H} = 1\cdot097 \times 10^{7}\text{ m}^{-1}$: $\lambda_{\min} = \frac{4}{1\cdot097 \times 10^{7}\text{ m}^{-1}} \approx 3\cdot646 \times 10^{-7}\text{ m} = 364\cdot6\text{ nm}$

Final answer: $3.65 \times 10^{-7}$ m

Q19(ii)5 marks · Short answerOpen: Calculate the minimum amount of energy which a gamma ray photon should possess…

Answer the following.

(iv)[2]
Calculate the minimum amount of energy which a gamma ray photon should possess in order to produce a proton and an anti-proton pair.
(v)[1]
Why is a nuclear fusion reaction also known as a thermonuclear reaction?
(vi)[1]
What is the physical significance of the fact that total energy of an orbiting electron is negative?
(vii)[1]
State any one limitation of Bohr's theory of hydrogen atom.
Show answer

Answer (iv)

The minimum energy of the gamma-ray photon must equal the rest-mass energy of the proton and antiproton pair: $E_{\min} = 2 m_{p} c^{2}$ Given $m_{p} = 1\cdot67 \times 10^{-27}\text{ kg}$ and $c = 3 \times 10^{8}\text{ m s}^{-1}$: $E_{\min} = 2 \times (1\cdot67 \times 10^{-27}\text{ kg}) \times (3 \times 10^{8}\text{ m s}^{-1})^{2}$ $E_{\min} = 3\cdot34 \times 10^{-27} \times 9 \times 10^{16}\text{ J} = 3\cdot006 \times 10^{-10}\text{ J} \approx 3\cdot01 \times 10^{-10}\text{ J}$ (or $\approx 1879\text{ MeV}$)

Final answer: $3.01 \times 10^{-10}$ J

Answer (v)

Nuclear fusion requires extremely high temperatures (millions of kelvins) to provide the fusing nuclei with enough thermal kinetic energy to overcome their strong electrostatic Coulomb repulsion. Because high thermal energy is required to initiate and sustain the reaction, it is known as a thermonuclear reaction.

Answer (vi)

The negative total energy signifies that the electron is bound to the nucleus by attractive electrostatic forces, forming a stable bound system. External energy must be supplied to liberate the electron from the atom.

Answer (vii)

Bohr's theory is applicable only to hydrogen and single-electron (hydrogen-like) ions; it cannot explain the spectra of multi-electron atoms.
Q205 marks · Case basedOpen: Annie, a student of Physics, began her experiment by fabricating a p-n junction…

Answer the following.

Annie, a student of Physics, began her experiment by fabricating a p-n junction diode from an extrinsic semiconductor crystal, leading to the formation of a depletion region and a potential barrier at the interface. She then measured resistance of the diode in the linear region of the V-I characteristic curve. She also studied its characteristics during forward bias and reverse bias. Finally, she designed a circuit to convert ac voltage to dc voltage.
Read the scenario given below and answer the questions that follow.
(i)[1]
Which instrument was used by Annie to measure current flowing through the diode during its reverse bias?
(ii)[1]
How did Annie obtain an extrinsic semiconductor from an intrinsic semiconductor?
(iii)[1]
What is meant by potential barrier?
(iv)[2]
Draw a labelled circuit diagram of a half wave rectifier.

Draw: labelled circuit diagram of a half wave rectifier

Must show: ac supply or transformer, p-n junction diode, load resistor RL, dc output across RL

Show answer

Answer (i)

A microammeter ($\mu\text{A}$) was used to measure the very small reverse current flowing through the diode.

Answer (ii)

Annie obtained an extrinsic semiconductor by doping the pure (intrinsic) semiconductor—that is, by adding a controlled, minute quantity of a suitable impurity (such as trivalent or pentavalent atoms) into the intrinsic semiconductor lattice.

Answer (iii)

Potential barrier is the potential difference established across the depletion layer of a p-n junction due to the accumulation of immobile ions, which opposes and prevents further diffusion of majority charge carriers across the junction.

Answer (iv)

A labelled circuit diagram of a half-wave rectifier shows an ac mains source connected to the primary of a step-down transformer. The secondary coil is connected in series with a single p-n junction diode (anode connected to the upper terminal of the secondary) and a load resistor $R_L$ connected to the lower terminal. The pulsating dc output voltage is taken across the load resistor $R_L$.
Diagram for this answer

About this board paper

The ISC Physics 2026 Question Paper is a board paper for Class 12: 42 questions in printed order, 70 marks in all, asked from 14 chapters. The board paper is the exam itself: the question paper CISCE set for that year’s ISC candidates. Solve it in one sitting, in the time allowed, to see how questions are worded and how hard the real paper is.

The layout of the current Physics paper (sections, marks, choices) is in the paper pattern guide.

By section

SectionQuestionsMarks printed*
A1414
B1118
C1233
D525

By kind of question

KindQuestionsMarks printed*
Numerical1536
Short answer1121
Derivation39
MCQ66
Drawing36
Graph15
Case based15
Assertion-reason11
One word11

By chapter

ChapterQuestionsMarks printed*
Current Electricity613
Moving charges and magnetism612
Ray Optics and Optical Instruments611
Alternating Current210
Nuclei210
Dual Nature of Radiation and Matter57
Semiconductor diode37
Wave Optics37
Electric Charges and Fields25
Electrostatic Potential, Potential Energy and Capacitance23
Electromagnetic Waves22
Atoms11
Electromagnetic Induction11
Magnetism and Matter11

* Marks are those printed on each question; where a question offers an either-or choice, both options are counted, so the totals can come to more than the paper’s own total.

Common questions

How many questions are in the ISC Physics 2026 Question Paper?

42 questions, 70 marks in all, shown in full and in printed order on this page.

Which chapters does the ISC Physics 2026 Question Paper ask most about?

By number of questions: Current Electricity (6), Moving charges and magnetism (6), Ray Optics and Optical Instruments (6) and Dual Nature of Radiation and Matter (5).

Does this page have the answers to the ISC Physics 2026 Question Paper?

Tap “Show answer” under a question to see its answer. The download button saves the paper as a PDF, with or without the answers.