Prashnikaप्रश्निका
Code
About
ChemistryBoardClass 12

ISC Chemistry 2018 Question Paper with Answers

The ISC Chemistry 2018 Question Paper for Class 12: all 44 questions, 70 marks in all, in printed order and in full. It is free to download: tap "Show answer" under a question to see its answer, or use the download button to save the questions as a PDF, with or without answers; "Print this paper" below prints it as it was set.

44questions
70marks
21chapters
Q1(a)(iii)1 mark · Fill inOpen: Propan-2-ol on reaction with iodine and sodium hydroxide gives ______…

Fill in the blank with the correct word.

Propan-2-ol on reaction with iodine and sodium hydroxide gives ______ precipitate and the reaction is called ________test.
Show answer

Answer

Blanks: yellow; iodoform

Propan-2-ol with iodine and sodium hydroxide gives a yellow precipitate (of iodoform); the reaction is called the iodoform test.
Q1(b)(i)1 mark · MCQOpen: During the course of an SN1 reaction, the intermediate species formed is:

Choose the correct option.

During the course of an $\text{S}_\text{N}1$ reaction, the intermediate species formed is:
  • (1)a carbocation
  • (2)a free radical
  • (3)a carbanion
  • (4)an intermediate complex
Show answer

Answer

Correct option: (1)

Answer: (1) a carbocation In the $\mathrm{S_N1}$ mechanism the halide leaves in the slow first step, forming a planar carbocation intermediate.
Q1(b)(ii)1 mark · MCQOpen: Purification of aluminium by electrolytic refining is called:

Choose the correct option.

Purification of aluminium by electrolytic refining is called:
  • (1)Serpeck’s process
  • (2)Hoope’s process
  • (3)Hall’s process
  • (4)Baeyer’s process
Show answer

Answer

Correct option: (2)

Answer: (2) Hoope’s process Hoope’s process refines aluminium electrolytically using a three-layer molten cell; Hall’s process is for extraction from alumina.
Q1(b)(iii)1 mark · MCQOpen: An aqueous solution of urea freezes at -0·186°C, K_f for water = 1·86 K kg…

Choose the correct option.

An aqueous solution of urea freezes at $-0\cdot186^\circ\text{C}$, $K_f$ for water = $1\cdot86\text{ K kg mol}^{-1}$, $K_b$ for water = $0\cdot512\text{ K kg mol}^{-1}$. The boiling point of urea solution will be:
  • (1)$373\cdot065\text{ K}$
  • (2)$373\cdot186\text{ K}$
  • (3)$373\cdot512\text{ K}$
  • (4)$373\cdot0512\text{ K}$
Show answer

Answer

Correct option: (4)

Answer: (4) $373\cdot0512\text{ K}$ $\Delta T_f = 0\cdot186\text{ K}$, so $m = \dfrac{0\cdot186}{1\cdot86} = 0\cdot1\text{ mol kg}^{-1}$ $\Delta T_b = 0\cdot512 \times 0\cdot1 = 0\cdot0512\text{ K}$, so boiling point $= 373 + 0\cdot0512 = 373\cdot0512\text{ K}$.
Q1(b)(iv)1 mark · MCQOpen: In the dehydration of alcohols to alkenes by heating with concentrated…

Choose the correct option.

In the dehydration of alcohols to alkenes by heating with concentrated sulphuric acid, the initiation step is:
  • (1)formation of carbocation
  • (2)formation of an ester
  • (3)protonation of alcohol molecule
  • (4)elimination of water
Show answer

Answer

Correct option: (3)

Answer: (3) protonation of alcohol molecule The first step is the protonation of the alcohol by $\mathrm{H_2SO_4}$ to form an oxonium ion; loss of water then gives the carbocation.
Q1(c)4 marks · MatchOpen: Question

Match the following.

Column A
  • (i)Rate constant
  • (ii)Biodegradable polymer
  • (iii)Zwitter ion
  • (iv)Purification of colloids
Column B
  • (a)Dialysis
  • (b)Glycine
  • (c)Arrhenius equation
  • (d)PHBV
Show answer

Answer

Pairs: (i) → (c), (ii) → (d), (iii) → (b), (iv) → (a)

(i) - (c) (ii) - (d) (iii) - (b) (iv) - (a)
Q1(d)(i)2 marks · Short answerOpen: (1) Why does the density of transition elements increase from Titanium to…

Answer the following.

(1) Why does the density of transition elements increase from Titanium to Copper? (at. no. Ti = 22, Cu = 29) (2) Why is zinc not regarded as a transition element? (at. no. Zn = 30)
Show answer

Answer

(1) Because the atomic size decreases (atomic volume decreases) from Ti to Cu as the nuclear charge increases, while the atomic mass increases, so the density increases. (2) Because zinc ($3d^{10}4s^2$) has a completely filled d-orbital in its atom and in its common ion $\mathrm{Zn^{2+}}$ ($3d^{10}$), so it has no partly filled d-orbitals.
Q1(d)(ii)2 marks · IdentifyOpen: Identify the compounds A, B, C and D. CH₃CN xrightarrowH₂O/H⁺ A xrightarrowNH₃…

Answer the following.

Identify the compounds A, B, C and D. $\text{CH}_3\text{CN} \xrightarrow{\text{H}_2\text{O}/\text{H}^+} \text{A} \xrightarrow{\text{NH}_3} \text{B} \xrightarrow{\text{heat}} \text{C} \xrightarrow{\text{Br}_2/\text{KOH}} \text{D}$
Show answer

Answer

A - ethanoic acid: CH3COOH

B - ammonium ethanoate: CH3COONH4

C - ethanamide: CH3CONH2

D - methanamine: CH3NH2

A = ethanoic acid ($\mathrm{CH_3COOH}$) B = ammonium ethanoate ($\mathrm{CH_3COONH_4}$) C = ethanamide ($\mathrm{CH_3CONH_2}$) D = methanamine ($\mathrm{CH_3NH_2}$)
Q1(d)(iii)2 marks · NumericalOpen: Calculate the osmotic pressure of a solution prepared by dissolving 0·025 g of…

Answer the following.

Calculate the osmotic pressure of a solution prepared by dissolving $0\cdot025\text{ g}$ of $\text{K}_2\text{SO}_4$ in $2\cdot0\text{ litres}$ of water at $25^\circ\text{C}$ assuming that $\text{K}_2\text{SO}_4$ is completely dissociated. (mol. wt. of $\text{K}_2\text{SO}_4 = 174\text{ g mol}^{-1}$)
Show answer

Answer

Formula used: Osmotic pressure: pi = i*C*R*T with R = 0.0821 L atm K^-1 mol^-1, T = 298 K, V = 2.0 L, i = 3, M2 = 174 g mol^-1, w2 = 0.025 g, so pi = 0.00527 atm

Formula: $\pi = iCRT$ $C = \dfrac{0\cdot025\text{ g}}{174\text{ g mol}^{-1}\times 2\cdot0\text{ L}} = 7\cdot18\times10^{-5}\text{ mol L}^{-1}$ $i = 3$ (complete dissociation into $2\mathrm{K^+}$ and $\mathrm{SO_4^{2-}}$), $T = 298\text{ K}$ $\pi = 3\times 7\cdot18\times10^{-5}\text{ mol L}^{-1}\times 0\cdot0821\text{ L atm K}^{-1}\text{mol}^{-1}\times 298\text{ K} = 5\cdot27\times10^{-3}\text{ atm}$

Final answer: 0.00527 atm

Q1(d)(iv)2 marks · Coordination complexOpen: What type of isomerism is shown by the following coordination compounds…

Answer the following.

What type of isomerism is shown by the following coordination compounds: $[\text{PtCl}_2(\text{NH}_3)_4]\text{Br}_2$ and $[\text{PtBr}_2(\text{NH}_3)_4]\text{Cl}_2$ Write their IUPAC names.
Show answer

Answer

IUPAC nametetraamminedichloridoplatinum(IV) bromide and tetraamminedibromidoplatinum(IV) chloride
Isomerismgeometrical: None, optical: no
They show ionisation isomerism: in solution they give different ions ($\mathrm{Br^-}$ and $\mathrm{Cl^-}$ respectively). $[\mathrm{PtCl_2(NH_3)_4}]\mathrm{Br_2}$ = tetraamminedichloridoplatinum(IV) bromide $[\mathrm{PtBr_2(NH_3)_4}]\mathrm{Cl_2}$ = tetraamminedibromidoplatinum(IV) chloride
Q2(a)2 marks · Short answerOpen: Write the rate law expression for the reaction A + B + C → D + E, if the order…

Answer the following.

(i)[1]
Write the rate law expression for the reaction $\text{A} + \text{B} + \text{C} \rightarrow \text{D} + \text{E}$, if the order of reaction is first, second and zero with respect to A, B and C, respectively.
(ii)[1]
How many times the rate of reaction will increase if the concentration of A, B and C are doubled in the equation given in (i) above?
Show answer

Answer (i)

$\text{Rate} = k[\mathrm{A}][\mathrm{B}]^2[\mathrm{C}]^0 = k[\mathrm{A}][\mathrm{B}]^2$

Answer (ii)

The rate increases 8 times. $\text{Rate}' = k(2[\mathrm{A}])(2[\mathrm{B}])^2 = 8k[\mathrm{A}][\mathrm{B}]^2 = 8\times\text{Rate}$
Q2(b)2 marks · NumericalOpen: The rate of reaction becomes four times when the temperature changes from 293 K…

Answer the following.

The rate of reaction becomes four times when the temperature changes from $293\text{ K}$ to $313\text{ K}$. Calculate the energy of activation ($E_a$) of the reaction assuming that it does not change with temperature. ($R = 8\cdot314\text{ J K}^{-1}\text{mol}^{-1}$)
Show answer

Answer

Formula used: Arrhenius equation at two temperatures: log10(k2/k1) = Ea/(2.303*R)*(T2 - T1)/(T1*T2) with R = 8.314 J K^-1 mol^-1, T1 = 293 K, T2 = 313 K, k1 = 1, k2 = 4, so Ea = 52859.8 J mol^-1

$\log\dfrac{k_2}{k_1} = \dfrac{E_a}{2\cdot303R}\left(\dfrac{T_2-T_1}{T_1T_2}\right)$ $\log 4 = \dfrac{E_a}{2\cdot303\times 8\cdot314\text{ J K}^{-1}\text{mol}^{-1}}\times\dfrac{20\text{ K}}{293\text{ K}\times 313\text{ K}}$ $E_a = 52860\text{ J mol}^{-1}$

Final answer: 52.86 kJ mol^-1

Q3(a)1 mark · Short answerOpen: How do antiseptics differ from disinfectants?

Answer the following.

How do antiseptics differ from disinfectants?
Show answer

Answer

Antiseptics are applied to living tissues (wounds, cuts, skin) to kill or stop the growth of microorganisms, whereas disinfectants are applied to non-living objects (floors, instruments) and are too harsh for living tissues.
Q3(b)1 mark · Short answerOpen: State the role of the following chemicals in the food industry: (i) Sodium…

Answer the following.

State the role of the following chemicals in the food industry: (i) Sodium benzoate (ii) Aspartame
Show answer

Answer

(i) Sodium benzoate: a food preservative (prevents growth of microorganisms). (ii) Aspartame: an artificial sweetener (about 100 times sweeter than cane sugar, used in cold foods and soft drinks).
Q42 marks · IdentifyOpen: An aromatic organic compound [A] on heating with NH₃ and Cu₂O at high pressure…

Identify the compounds in the following.

An aromatic organic compound [A] on heating with $\text{NH}_3$ and $\text{Cu}_2\text{O}$ at high pressure gives [B]. The compound [B] on treatment with ice cold solution of $\text{NaNO}_2$ and $\text{HCl}$ gives [C], which on heating with $\text{Cu}/\text{HCl}$ gives compound [A] again. Identify the compounds [A], [B] and [C]. Write the name of the reaction for the conversion of [B] to [C].
Show answer

Answer

Equation: $\mathrm{C_{6}H_{5}NH_{2}} + \mathrm{NaNO_{2}} + 2\mathrm{HCl} \xrightarrow{\text{273-278}\text{ }\text{K}\text{ }\text{(diazotisation)}} \mathrm{C_{6}H_{5}N_{2}Cl} + \mathrm{NaCl} + 2\mathrm{H_{2}O}$

A - chlorobenzene: C6H5Cl

B - aniline: C6H5NH2

C - benzenediazonium chloride: C6H5N2Cl

A = chlorobenzene ($\mathrm{C_6H_5Cl}$) B = aniline ($\mathrm{C_6H_5NH_2}$) C = benzenediazonium chloride ($\mathrm{C_6H_5N_2^+Cl^-}$) The conversion of B to C is diazotisation.
Q7(a)2 marks · ConversionOpen: Picric acid from phenol. Ethyl chloride from diethyl ether.

How will you bring about the following conversions?

(i)[1]
Picric acid from phenol.
(ii)[1]
Ethyl chloride from diethyl ether.
Show answer

Answer (i)

Equation: $\mathrm{C_{6}H_{5}OH} + 3\mathrm{HNO_{3}} \xrightarrow{\text{conc.}\text{ }\mathrm{H_{2}SO_{4}}} \mathrm{C_{6}H_{2}(NO_{2})_{3}OH} + 3\mathrm{H_{2}O}$

Phenol is nitrated with conc. $\mathrm{HNO_3}$ in the presence of conc. $\mathrm{H_2SO_4}$ to give picric acid (2,4,6-trinitrophenol).

Answer (ii)

Equation: $\mathrm{C_{2}H_{5}OC_{2}H_{5}} + \mathrm{PCl_{5}} \xrightarrow{\text{heat}} 2\mathrm{C_{2}H_{5}Cl} + \mathrm{POCl_{3}}$

Diethyl ether is treated with phosphorus pentachloride to give ethyl chloride.
Q7(b)2 marks · ConversionOpen: Anisole from phenol. Ethyl acetate from ethanol.

How will you bring about the following conversions?

(i)[1]
Anisole from phenol.
(ii)[1]
Ethyl acetate from ethanol.
Show answer

Answer (i)

Equations: $\mathrm{C_{6}H_{5}OH} + \mathrm{NaOH} \longrightarrow \mathrm{C_{6}H_{5}ONa} + \mathrm{H_{2}O}$ $\mathrm{C_{6}H_{5}ONa} + \mathrm{CH_{3}Cl} \xrightarrow{\text{heat}} \mathrm{C_{6}H_{5}OCH_{3}} + \mathrm{NaCl}$

Phenol is converted to sodium phenoxide with NaOH, which reacts with methyl chloride (Williamson synthesis) to give anisole.

Answer (ii)

Equation: $\mathrm{C_{2}H_{5}OH} + \mathrm{CH_{3}COOH} \xrightarrow{\text{conc.}\text{ }\mathrm{H_{2}SO_{4}}\text{,}\text{ }\text{heat}} \mathrm{CH_{3}COOC_{2}H_{5}} + \mathrm{H_{2}O}$

Ethanol is heated with ethanoic acid in the presence of conc. $\mathrm{H_2SO_4}$ (esterification) to give ethyl acetate.
Q82 marks · NumericalOpen: 40% of a first order reaction is completed in 50 minutes. How much time will it…

Solve the following.

$40\%$ of a first order reaction is completed in $50\text{ minutes}$. How much time will it take for the completion of $80\%$ of this reaction?
Show answer

Answer

Formulas used: First-order integrated rate law: k = 2.303/t*log10(A0/A) with A = 60, t = 50 min, A0 = 100, so k = 0.01022 min^-1 First-order integrated rate law: k = 2.303/t*log10(A0/A) with A = 20, k = 0.01022 min^-1, A0 = 100, so t = 157.5 min

Formula: $k = \dfrac{2\cdot303}{t}\log\dfrac{[\mathrm{A}]_0}{[\mathrm{A}]}$ For $40\%$ completion: $[\mathrm{A}]_0 = 100$, $[\mathrm{A}] = 60$ $k = \dfrac{2\cdot303}{50\text{ min}}\log\dfrac{100}{60} = 1\cdot02\times10^{-2}\text{ min}^{-1}$ For $80\%$ completion: $[\mathrm{A}] = 20$ $t = \dfrac{2\cdot303}{1\cdot02\times10^{-2}\text{ min}^{-1}}\log\dfrac{100}{20} = 157\cdot5\text{ min}$

Final answer: 157.5 min

Q9(a)3 marks · NumericalOpen: The freezing point of a solution containing 5·85 g of NaCl in 100 g of water is…

Solve the following.

The freezing point of a solution containing $5\cdot85\text{ g}$ of $\text{NaCl}$ in $100\text{ g}$ of water is $-3\cdot348^\circ\text{C}$. Calculate van’t Hoff factor ‘$i$’ for this solution. What will be the experimental molecular weight of $\text{NaCl}$? ($K_f$ for water = $1\cdot86\text{ K kg mol}^{-1}$, at. wt. $\text{Na} = 23$, $\text{Cl} = 35\cdot5$)
Show answer

Answer

Formulas used: Depression of freezing point: dTf = i*Kf*m with Kf = 1.86 K kg mol^-1, M2 = 58.5 g mol^-1, w1 = 100 g, w2 = 5.85 g, dTf = 3.348 K, so i = 1.8 van 't Hoff factor from molar masses: i = M_normal/M_observed with i = 1.8, M_normal = 58.5 g mol^-1, so M_observed = 32.5 g mol^-1

Formula: $\Delta T_f = iK_f m$ $m = \dfrac{5\cdot85\text{ g}}{58\cdot5\text{ g mol}^{-1}\times 0\cdot1\text{ kg}} = 1\cdot0\text{ mol kg}^{-1}$ $i = \dfrac{3\cdot348\text{ K}}{1\cdot86\text{ K kg mol}^{-1}\times 1\cdot0\text{ mol kg}^{-1}} = 1\cdot8$ Experimental molecular weight $= \dfrac{\text{calculated molecular weight}}{i} = \dfrac{58\cdot5}{1\cdot8} = 32\cdot5\text{ g mol}^{-1}$

Final answer: i = 1.8; M = 32.5 g mol^-1

Q9(b)3 marks · NumericalOpen: An aqueous solution containing 12·48 g of barium chloride (BaCl₂) in 1000 g of…

Solve the following.

An aqueous solution containing $12\cdot48\text{ g}$ of barium chloride ($\text{BaCl}_2$) in $1000\text{ g}$ of water, boils at $100\cdot0832^\circ\text{C}$. Calculate the degree of dissociation of barium chloride. ($K_b$ for water = $0\cdot52\text{ K kg mol}^{-1}$, at. wt. $\text{Ba} = 137$, $\text{Cl} = 35\cdot5$)
Show answer

Answer

Formulas used: Elevation of boiling point: dTb = i*Kb*m with Kb = 0.52 K kg mol^-1, M2 = 208 g mol^-1, w1 = 1000 g, w2 = 12.48 g, dTb = 0.0832 K, so i = 2.667 Degree of dissociation from i: alpha = (i - 1)/(nu - 1) with i = 2.667, nu = 3, so alpha = 0.8333

$\Delta T_b = 100\cdot0832 - 100 = 0\cdot0832\text{ K}$; $M_2(\mathrm{BaCl_2}) = 137 + 2\times35\cdot5 = 208\text{ g mol}^{-1}$ $\Delta T_b = iK_b\dfrac{w_2\times1000}{M_2\times w_1}$, so $0\cdot0832 = i\times0\cdot52\times\dfrac{12\cdot48}{208\times1}$ $i = 2\cdot67$ $\mathrm{BaCl_2 \rightarrow Ba^{2+} + 2Cl^-}$, so $\nu = 3$ and $\alpha = \dfrac{i-1}{\nu-1} = \dfrac{2\cdot67-1}{2} = 0\cdot833$

Final answer: 0.833

Q103 marks · Short answerOpen: Examine the defective crystal given below and answer the question that follows…

Answer the following.

Examine the defective crystal given below and answer the question that follows:
$\text{A}^+$$\text{B}^-$$\text{A}^+$$\text{B}^-$$\text{A}^+$
$\text{B}^-$$\text{B}^-$$\text{A}^+$$\text{B}^-$
$\text{A}^+$$\text{B}^-$$\text{A}^+$$\text{A}^+$
$\text{B}^-$$\text{A}^+$$\text{B}^-$$\text{A}^+$$\text{B}^-$
State if the above defect is stoichiometric or non-stoichiometric. How does this defect affect the density of the crystal? Also, write the term used for this type of defect.
Figure for this question
Show answer

Answer

It is a stoichiometric defect: one $\mathrm{A^+}$ and one $\mathrm{B^-}$ are missing, so the crystal stays electrically neutral and the ratio of ions is unchanged. The density decreases, because ions are missing from their lattice sites while the volume stays the same. The term for this defect is Schottky defect.
Q11(a)1 mark · Short answerOpen: For ferric hydroxide sol the coagulating power of phosphate ion is more than…

Give reasons for the following.

For ferric hydroxide sol the coagulating power of phosphate ion is more than chloride ion.
Show answer

Answer

Because ferric hydroxide sol is positively charged, it is coagulated by anions; by the Hardy-Schulze rule the greater the charge on the coagulating ion the greater its power, and $\mathrm{PO_4^{3-}}$ has a higher charge than $\mathrm{Cl^-}$.
Q11(b)1 mark · Short answerOpen: Medicines are more effective in their colloidal form.

Give reasons for the following.

Medicines are more effective in their colloidal form.
Show answer

Answer

Because a colloidal medicine has a very small particle size and hence a large surface area, so it is more easily absorbed and assimilated by the body.
Q11(c)1 mark · Short answerOpen: Gelatin is added to ice creams.

Give reasons for the following.

Gelatin is added to ice creams.
Show answer

Answer

Because gelatin acts as a protective colloid: it forms a protective layer around the ice particles, preventing them from growing and coagulating, so the ice cream stays smooth.
Q12(a)1.5 marks · Coordination complexOpen: For the complex ion [Fe(CN)₆]³⁻, state: (i) the type of hybridisation. (ii) the…

Answer the following about the coordination compound.

For the complex ion $[\text{Fe}(\text{CN})_6]^{3-}$, state: (i) the type of hybridisation. (ii) the magnetic behaviour. (iii) the oxidation number of the central metal atom.
Show answer

Answer

Oxidation state3
Hybridisationd2sp3
Magnetic behaviourparamagnetic
(i) $d^2sp^3$ hybridisation (inner orbital, octahedral complex). (ii) Paramagnetic, because $\mathrm{Fe^{3+}}$ ($3d^5$) has one unpaired electron with the strong field ligand $\mathrm{CN^-}$ (low spin). (iii) Oxidation number of Fe = +3.
Q12(b)1.5 marks · Coordination complexOpen: Write the IUPAC name of [Co(en)₂Cl₂]⁺ ion and draw the structures of its…

Answer the following about the coordination compound.

Write the IUPAC name of $[\text{Co}(\text{en})_2\text{Cl}_2]^+$ ion and draw the structures of its geometrical isomers.
Show answer

Answer

IUPAC namedichloridobis(ethane-1,2-diamine)cobalt(III) ion
Isomerismgeometrical: 2, optical: yes

Worked out by the server: 2 geometrical isomer(s): trans, cis; optical isomers: yes

IUPAC name: dichloridobis(ethane-1,2-diamine)cobalt(III) ion. It shows two geometrical isomers: cis (the two Cl on adjacent positions, which is also optically active) and trans (the two Cl on opposite positions).
Q13(a)3 marks · Short answerOpen: Explain why: Mn²⁺ is more stable than Fe²⁺ towards oxidation to +3 state. (At…

Answer the following.

Explain why:
(i)[1]
$\text{Mn}^{2+}$ is more stable than $\text{Fe}^{2+}$ towards oxidation to $+3$ state. (At. no. of $\text{Mn} = 25$, $\text{Fe} = 26$)
(ii)[1]
Transition elements usually form coloured ions.
(iii)[1]
Zr and Hf exhibit similar properties. (At. no. of $\text{Zr} = 40$, $\text{Hf} = 72$)
Show answer

Answer (i)

Because $\mathrm{Mn^{2+}}$ has the stable half-filled configuration $3d^5$, whereas $\mathrm{Fe^{2+}}$ ($3d^6$) on oxidation to $\mathrm{Fe^{3+}}$ ($3d^5$) attains the half-filled stable configuration, so $\mathrm{Fe^{2+}}$ is easily oxidised.

Answer (ii)

Because they have partly filled d-orbitals, so they undergo d-d transitions: electrons absorb light of a certain wavelength from the visible region and the complementary colour is seen.

Answer (iii)

Because of the lanthanoid contraction, the atomic (ionic) radii of Zr and Hf are almost equal, so they have similar properties.
Q13(b)3 marks · CompleteOpen: Complete and balance the following chemical equations: KMnO₄ + KI + H₂SO₄ →…

Answer the following.

Complete and balance the following chemical equations:
(i)[1]
$\text{KMnO}_4 + \text{KI} + \text{H}_2\text{SO}_4 \rightarrow$ _____ + ______ + ______ + _______
(ii)[1]
$\text{K}_2\text{Cr}_2\text{O}_7 + \text{H}_2\text{SO}_4 + \text{H}_2\text{S} \rightarrow$ _____ + ______ + ______ + _______
(iii)[1]
$\text{KMnO}_4 + \text{H}_2\text{SO}_4 + \text{FeSO}_4 \rightarrow$ _____ + ______ + ______ + _______
Show answer

Answer (i)

Equation: $2\mathrm{KMnO_{4}} + 10\mathrm{KI} + 8\mathrm{H_{2}SO_{4}} \longrightarrow 6\mathrm{K_{2}SO_{4}} + 2\mathrm{MnSO_{4}} + 5\mathrm{I_{2}} + 8\mathrm{H_{2}O}$

Acidified potassium permanganate oxidises iodide to iodine.

Answer (ii)

Equation: $\mathrm{K_{2}Cr_{2}O_{7}} + 4\mathrm{H_{2}SO_{4}} + 3\mathrm{H_{2}S} \longrightarrow \mathrm{K_{2}SO_{4}} + \mathrm{Cr_{2}(SO_{4})_{3}} + 3\mathrm{S} + 7\mathrm{H_{2}O}$

Acidified potassium dichromate oxidises hydrogen sulphide to sulphur.

Answer (iii)

Equation: $2\mathrm{KMnO_{4}} + 8\mathrm{H_{2}SO_{4}} + 10\mathrm{FeSO_{4}} \longrightarrow \mathrm{K_{2}SO_{4}} + 2\mathrm{MnSO_{4}} + 5\mathrm{Fe_{2}(SO_{4})_{3}} + 8\mathrm{H_{2}O}$

Acidified potassium permanganate oxidises iron(II) sulphate to iron(III) sulphate.
Q14(a)1 mark · ArrangeOpen: Arrange the following in the increasing order of their basic strength: C₂H₅NH₂…

Arrange the following in the order asked.

Arrange the following in the increasing order of their basic strength: $\text{C}_2\text{H}_5\text{NH}_2$, $\text{C}_6\text{H}_5\text{NH}_2$, $(\text{C}_2\text{H}_5)_2\text{NH}$
Show answer

Answer

Order, first to last: C6H5NH2, C2H5NH2, (C2H5)2NH

$\mathrm{C_6H_5NH_2} < \mathrm{C_2H_5NH_2} < (\mathrm{C_2H_5})_2\mathrm{NH}$
Q14(b)1 mark · ConversionOpen: Give a balanced chemical equation to convert methyl cyanide to ethyl alcohol.

How will you bring about the following conversion?

Give a balanced chemical equation to convert methyl cyanide to ethyl alcohol.
Show answer

Answer

Equations: $\mathrm{CH_{3}CN} + 2\mathrm{H_{2}} \xrightarrow{\text{Na}\text{/}\mathrm{C_{2}H_{5}OH}\text{ }\text{(or}\text{ }\mathrm{LiAlH_{4})}} \mathrm{CH_{3}CH_{2}NH_{2}}$ $\mathrm{CH_{3}CH_{2}NH_{2}} + \mathrm{HNO_{2}} \xrightarrow{\mathrm{NaNO_{2}}\text{/}\text{HCl}\text{,}\text{ }\text{273}\text{ }\text{K}} \mathrm{CH_{3}CH_{2}OH} + \mathrm{N_{2}} + \mathrm{H_{2}O}$

Methyl cyanide is reduced to ethylamine, which is converted to ethyl alcohol with nitrous acid.
Q14(c)1 mark · ReactionOpen: What happens when benzene diazonium chloride reacts with phenol in weak…

Write the chemical equation for the following.

What happens when benzene diazonium chloride reacts with phenol in weak alkaline medium? (Give balanced equation).
Show answer

Answer

Equation: $\mathrm{C_{6}H_{5}N_{2}Cl} + \mathrm{C_{6}H_{5}OH} \xrightarrow{\text{NaOH}\text{ }\text{(weak}\text{ }\text{alkaline)}\text{,}\text{ }\text{273-278}\text{ }\text{K}} \mathrm{C_{6}H_{5}N=NC_{6}H_{4}OH} + \mathrm{HCl}$

Reaction: Coupling reaction

Product: 4-hydroxyazobenzene (p-hydroxyazobenzene)

Benzenediazonium chloride couples with phenol at the para position to give p-hydroxyazobenzene, an orange azo dye.
Q153 marks · Short answerOpen: Name the sulphide ore of Copper. Describe how pure copper is extracted from…

Answer the following.

Name the sulphide ore of Copper. Describe how pure copper is extracted from this ore.
Show answer

Answer

Equations: $2\mathrm{CuFeS_{2}} + \mathrm{O_{2}} \xrightarrow{\text{roasting}} \mathrm{Cu_{2}S} + 2\mathrm{FeS} + \mathrm{SO_{2}}$ $2\mathrm{FeS} + 3\mathrm{O_{2}} \xrightarrow{\text{roasting}} 2\mathrm{FeO} + 2\mathrm{SO_{2}}$ $\mathrm{FeO} + \mathrm{SiO_{2}} \xrightarrow{\text{silica}\text{ }\text{flux}\text{,}\text{ }\text{heat}} \mathrm{FeSiO_{3}}$ $2\mathrm{Cu_{2}S} + 3\mathrm{O_{2}} \xrightarrow{\text{air}\text{ }\text{blown}\text{,}\text{ }\text{converter}} 2\mathrm{Cu_{2}O} + 2\mathrm{SO_{2}}$ $2\mathrm{Cu_{2}O} + \mathrm{Cu_{2}S} \xrightarrow{\text{self-reduction}} 6\mathrm{Cu} + \mathrm{SO_{2}}$

The sulphide ore of copper is copper pyrites (chalcopyrite), $\mathrm{CuFeS_2}$. 1. Concentration: the crushed ore is concentrated by froth floatation. 2. Roasting: the ore is roasted in air, forming $\mathrm{Cu_2S}$ and $\mathrm{FeS}$; the iron is removed as slag ($\mathrm{FeSiO_3}$) by heating in a reverberatory furnace with silica. 3. Bessemerisation: the molten matte of $\mathrm{Cu_2S}$ is blown with air in a converter, giving blister copper, which is refined electrolytically to pure copper.
Q16(a)5 marks · NumericalOpen: Calculate the emf and Δ G° for the cell reaction at 25°C: Zn(s) | Zn²⁺(aq, 0·1…

Solve and answer the following.

(i)[3]
Calculate the emf and $\Delta G^\circ$ for the cell reaction at $25^\circ\text{C}$: $\text{Zn}(s) \mid \text{Zn}^{2+}(aq, 0\cdot1\text{ M}) \parallel \text{Cd}^{2+}(aq, 0\cdot01\text{ M}) \mid \text{Cd}(s)$ Given $E^\circ_{\text{Zn}^{2+}/\text{Zn}} = -0\cdot763\text{ V}$ and $E^\circ_{\text{Cd}^{2+}/\text{Cd}} = -0\cdot403\text{ V}$.
(ii)[2]
Define the following terms: (1) Equivalent conductivity (2) Corrosion of metals
Show answer

Answer (i)

Formulas used: Standard emf of a cell: E0cell = E0cathode - E0anode with E0anode = -0.763 V, E0cathode = -0.403 V, so E0cell = 0.36 V Nernst equation at 298 K: E = E0 - 0.0591/n*log10(Q) with Q = 10, n = 2, E0 = 0.36 V, so E = 0.3305 V Gibbs energy from emf: dG = -n*F*E with E = 0.36 V, F = 96500 C mol^-1, n = 2, so dG = -69480 J mol^-1

Cell reaction: $\mathrm{Zn + Cd^{2+} \rightarrow Zn^{2+} + Cd}$, $n = 2$ $E^\circ_{cell} = E^\circ_{cathode} - E^\circ_{anode} = -0\cdot403 - (-0\cdot763) = 0\cdot36\text{ V}$ $E_{cell} = E^\circ - \dfrac{0\cdot0591}{2}\log\dfrac{[\mathrm{Zn^{2+}}]}{[\mathrm{Cd^{2+}}]} = 0\cdot36 - \dfrac{0\cdot0591}{2}\log\dfrac{0\cdot1}{0\cdot01} = 0\cdot3305\text{ V}$ $\Delta G^\circ = -nFE^\circ = -2\times96500\text{ C mol}^{-1}\times0\cdot36\text{ V} = -69480\text{ J mol}^{-1}$

Final answer: E = 0.3305 V; dG0 = -69.48 V; kJ mol^-1

Answer (ii)

(1) Equivalent conductivity is the conductance of all the ions produced by one gram equivalent of the electrolyte dissolved in a given volume of solution, kept between two parallel electrodes 1 cm apart: $\Lambda_{eq} = \dfrac{\kappa\times1000}{N}$. (2) Corrosion is the slow eating away of a metal by the action of air, moisture or chemicals on its surface, forming its oxide, carbonate or sulphide (e.g. rusting of iron).
Q16(b)5 marks · NumericalOpen: The specific conductivity of a solution containing 5 g of anhydrous BaCl₂ (mol…

Solve and answer the following.

(i)[3]
The specific conductivity of a solution containing $5\text{ g}$ of anhydrous $\text{BaCl}_2$ (mol. wt. $= 208$) in $1000\text{ cm}^3$ of a solution is found to be $0\cdot0058\text{ ohm}^{-1}\text{cm}^{-1}$. Calculate the molar and equivalent conductivity of the solution.
(ii)[2]
What is an electrochemical series? How is it useful in predicting whether a metal can liberate hydrogen from acid or not?
Show answer

Answer (i)

Formula used: Molar conductivity: Lm = kappa/C with C = 0.02404 mol L^-1, kappa = 0.0058 S cm^-1, so Lm = 241.3 S cm^2 mol^-1

$C = \dfrac{5\text{ g}}{208\text{ g mol}^{-1}\times1\text{ L}} = 0\cdot02404\text{ mol L}^{-1}$ $\Lambda_m = \dfrac{\kappa\times1000}{C} = \dfrac{0\cdot0058\text{ ohm}^{-1}\text{cm}^{-1}\times1000\text{ cm}^3\text{L}^{-1}}{0\cdot02404\text{ mol L}^{-1}} = 241\cdot3\text{ ohm}^{-1}\text{cm}^2\text{mol}^{-1}$ For $\mathrm{BaCl_2}$ one mole = 2 equivalents, so $\Lambda_{eq} = \dfrac{241\cdot3}{2} = 120\cdot6\text{ ohm}^{-1}\text{cm}^2\text{eq}^{-1}$

Final answer: 241.3; 120.6 ohm^-1 cm^2 mol^-1; ohm^-1 cm^2 eq^-1

Answer (ii)

An electrochemical series is the arrangement of elements in the increasing order of their standard reduction potentials. A metal that is above hydrogen in the series (negative $E^\circ$, higher in the oxidation sense) can displace hydrogen from dilute acids, since it loses electrons more readily than hydrogen; a metal below hydrogen (positive $E^\circ$, e.g. Cu, Ag) cannot liberate hydrogen from acid.
Q17(a)5 marks · Short answerOpen: Explain why: (1) Nitrogen does not form pentahalides. (2) Helium is used for…

Answer the following.

(i)[3]
Explain why: (1) Nitrogen does not form pentahalides. (2) Helium is used for filling weather balloons. (3) ICl is more reactive than $\text{I}_2$.
(ii)[2]
Draw the structures of the following: (1) $\text{HClO}_4$ (2) $\text{H}_3\text{PO}_3$
Show answer

Answer (i)

1. Because nitrogen has no vacant d-orbitals in its valence shell, so it cannot expand its octet to form five bonds. 2. Because helium is non-inflammable and very light (lighter than air, next to hydrogen), so it is safe for filling weather balloons. 3. Because the I-Cl bond is weaker (polar) than the I-I bond, so ICl breaks more easily and is more reactive.

Answer (ii)

perchloric acid: HClO4

phosphonic acid: H3PO3

(1) $\mathrm{HClO_4}$: chlorine at the centre bonded to three oxygen atoms by double bonds (Cl=O) and one -OH group (tetrahedral). (2) $\mathrm{H_3PO_3}$: phosphorus at the centre bonded to one P=O, two P-OH groups and one P-H bond (tetrahedral).
Q17(b)5 marks · Short answerOpen: Explain why: (1) Mercury loses its meniscus in contact with ozone. (2) Halogens…

Answer the following.

(i)[3]
Explain why: (1) Mercury loses its meniscus in contact with ozone. (2) Halogens are coloured and the colour deepens on moving down in the group from fluorine to iodine. (3) Hydride of sulphur is a gas while hydride of oxygen is a liquid.
(ii)[2]
Complete and balance the following reactions: (1) $\text{NaCl} + \text{MnO}_2 + \text{H}_2\text{SO}_4 \rightarrow$ _______ + _______ + ________ + _____ (2) $\text{KMnO}_4 + \text{SO}_2 + \text{H}_2\text{O} \rightarrow$ _______ + _______ + __________
Show answer

Answer (i)

1. Because ozone oxidises mercury to mercurous oxide ($\mathrm{Hg_2O}$), which dissolves in mercury and sticks to glass, so mercury loses its meniscus (tailing of mercury). 2. Because halogen molecules absorb light from the visible region, exciting outer electrons to higher levels; down the group the energy gap decreases, so light of longer wavelength is absorbed and the colour deepens. 3. Because water molecules are associated by strong hydrogen bonding (oxygen is highly electronegative), whereas $\mathrm{H_2S}$ has no hydrogen bonding, so $\mathrm{H_2S}$ is a gas.

Answer (ii)

Equations: $2\mathrm{NaCl} + \mathrm{MnO_{2}} + 3\mathrm{H_{2}SO_{4}} \xrightarrow{\text{heat}} 2\mathrm{NaHSO_{4}} + \mathrm{MnSO_{4}} + 2\mathrm{H_{2}O} + \mathrm{Cl_{2}}$ $2\mathrm{KMnO_{4}} + 5\mathrm{SO_{2}} + 2\mathrm{H_{2}O} \longrightarrow \mathrm{K_{2}SO_{4}} + 2\mathrm{MnSO_{4}} + 2\mathrm{H_{2}SO_{4}}$

(1) Chlorine is evolved when sodium chloride is heated with manganese dioxide and conc. sulphuric acid. (2) Acidified potassium permanganate oxidises sulphur dioxide to sulphuric acid.
Q18(a)5 marks · ReactionOpen: Give balanced equations for the following reactions: (1) Benzaldehyde reacts…

Answer the following.

(i)[3]
Give balanced equations for the following reactions: (1) Benzaldehyde reacts with hydrazine. (2) Acetic acid reacts with phosphorous pentachloride. (3) Acetone reacts with sodium bisulphite.
(ii)[2]
Give one chemical test each to distinguish between the following pairs of compounds: (1) Ethanol and acetic acid (2) Acetaldehyde and benzaldehyde
Show answer

Answer (i)

Equations: $\mathrm{C_{6}H_{5}CHO} + \mathrm{H_{2}NNH_{2}} \longrightarrow \mathrm{C_{6}H_{5}CH=NNH_{2}} + \mathrm{H_{2}O}$ $\mathrm{CH_{3}COOH} + \mathrm{PCl_{5}} \longrightarrow \mathrm{CH_{3}COCl} + \mathrm{POCl_{3}} + \mathrm{HCl}$ $\mathrm{CH_{3}COCH_{3}} + \mathrm{NaHSO_{3}} \longrightarrow \mathrm{(CH_{3})_{2}C(OH)SO_{3}Na}$

Products: benzaldehyde hydrazone, ethanoyl chloride (acetyl chloride), sodium 2-hydroxypropane-2-sulphonate (acetone bisulphite compound)

(1) Benzaldehyde condenses with hydrazine to give benzaldehyde hydrazone. (2) Acetic acid reacts with $\mathrm{PCl_5}$ to give acetyl chloride. (3) Acetone adds sodium bisulphite to give the bisulphite addition product.

Answer (ii)

PairTestObservation
(1) Ethanol and acetic acidAdd $\mathrm{NaHCO_3}$ solutionAcetic acid gives brisk effervescence of $\mathrm{CO_2}$; ethanol gives none
(2) Acetaldehyde and benzaldehydeWarm with Fehling's solutionAcetaldehyde gives a red precipitate of $\mathrm{Cu_2O}$; benzaldehyde gives none
Q18(b)5 marks · ReactionOpen: Write chemical equations to illustrate the following name reactions: (1)…

Answer the following.

(i)[3]
Write chemical equations to illustrate the following name reactions: (1) Clemmensen’s reduction (2) Rosenmund’s reduction (3) HVZ reaction
(ii)[2]
Explain why: (1) Acetaldehyde undergoes aldol condensation, but formaldehyde does not. (2) Acetic acid is a weaker acid as compared to formic acid.
Show answer

Answer (i)

Equations: $\mathrm{CH_{3}COCH_{3}} + 2\mathrm{Zn} + 4\mathrm{HCl} \xrightarrow{\text{Zn-Hg}\text{,}\text{ }\text{conc.}\text{ }\text{HCl}} \mathrm{CH_{3}CH_{2}CH_{3}} + 2\mathrm{ZnCl_{2}} + \mathrm{H_{2}O}$ $\mathrm{CH_{3}COCl} + \mathrm{H_{2}} \xrightarrow{\text{Pd}\text{/}\mathrm{BaSO_{4}}} \mathrm{CH_{3}CHO} + \mathrm{HCl}$ $\mathrm{CH_{3}COOH} + \mathrm{Cl_{2}} \xrightarrow{\text{red}\text{ }\text{P}} \mathrm{ClCH_{2}COOH} + \mathrm{HCl}$

Reaction: Clemmensen's reduction; Rosenmund's reduction; Hell-Volhard-Zelinsky (HVZ) reaction

Products: propane, ethanal, chloroethanoic acid

(1) Clemmensen's reduction: carbonyl group reduced to $-\mathrm{CH_2-}$ with zinc amalgam and conc. HCl. (2) Rosenmund's reduction: acyl chloride reduced to aldehyde with $\mathrm{H_2}$ over $\mathrm{Pd/BaSO_4}$. (3) HVZ reaction: carboxylic acid with $\alpha$-hydrogen is halogenated at the $\alpha$-carbon with $\mathrm{Cl_2}$ and red phosphorus.

Answer (ii)

1. Because acetaldehyde has $\alpha$-hydrogen atoms, whereas formaldehyde has no $\alpha$-hydrogen, so only acetaldehyde undergoes aldol condensation. 2. Because the methyl group in acetic acid has a +I effect, which increases the electron density on oxygen and destabilises the acetate ion, whereas formic acid has no such group, so acetic acid is the weaker acid.

About this board paper

The ISC Chemistry 2018 Question Paper is a board paper for Class 12: 44 questions in printed order, 70 marks in all, asked from 21 chapters. The board paper is the exam itself: the question paper CISCE set for that year’s ISC candidates. Solve it in one sitting, in the time allowed, to see how questions are worded and how hard the real paper is.

The layout of the current Chemistry paper (sections, marks, choices) is in the paper pattern guide.

By kind of question

KindQuestionsMarks printed*
Short answer1532
Numerical722
Reaction311
Coordination complex35
Conversion35
Fill in44
MCQ44
Identify24
Match14
Complete13
Arrange11

By chapter

ChapterQuestionsMarks printed*
Electrochemistry311
Chemical Kinetics410
Aldehydes and Ketones210
Solutions49
d-and f-Block Elements38
Coordination Compounds35
Group-15 Elements15
Group-16 Elements15
General Principles and Processes of Isolation of Elements24
Phenols24
Solid State24
Surface Chemistry33
Aliphatic Amines23
Diazonium salts23
Alcohols22
Chemistry in Everyday Life22
Polymers22
Nucleic Acids12
Cyanides and Isocyanides11
Group-18 Elements11
Haloalkanes and Haloarenes11

* Marks are those printed on each question; where a question offers an either-or choice, both options are counted, so the totals can come to more than the paper’s own total.

Common questions

How many questions are in the ISC Chemistry 2018 Question Paper?

44 questions, 70 marks in all, shown in full and in printed order on this page.

Which chapters does the ISC Chemistry 2018 Question Paper ask most about?

By number of questions: Chemical Kinetics (4), Solutions (4), Electrochemistry (3) and d-and f-Block Elements (3).

Does this page have the answers to the ISC Chemistry 2018 Question Paper?

Tap “Show answer” under a question to see its answer. The download button saves the paper as a PDF, with or without the answers.