The ISC Physics 2020 Question Paper for Class 12: all 48 questions, 70 marks in all, in printed order and in full. It is free to download: tap "Show answer" under a question to see its answer, or use the download button to save the questions as a PDF, with or without answers; "Print this paper" below prints it as it was set.
A point charge ‘q’ is kept at each of the vertices of an equilateral triangle having each side ‘a’. Total electrostatic potential energy of the system is:
Answer: (c) $\left(\frac{1}{4\pi\varepsilon_0}\right)\frac{3q^2}{a}$
There are three pairs of charges, each pair a distance $a$ apart, so $U=3\times\frac{1}{4\pi\varepsilon_0}\frac{q^2}{a}$.
(a)a ferromagnetic substance behaves like a paramagnetic substance.
(b)a paramagnetic substance behaves like a diamagnetic substance.
(c)a ferromagnetic substance behaves like a diamagnetic substance.
(d)a paramagnetic substance behaves like a ferromagnetic substance.
Show answer
Answer
Correct option: (a)
Answer: (a) a ferromagnetic substance behaves like a paramagnetic substance.
Above the Curie temperature thermal agitation destroys the domain alignment of a ferromagnet.
(d)Both objective and eyepiece should have large focal length.
Show answer
Answer
Correct option: (b)
Answer: (b) Objective should have large focal length.
Magnifying power $m=f_o/f_e$ is large when $f_o$ is large and $f_e$ is small; a large $f_o$ also gives a larger image of the distant object.
The total electric flux through a closed surface is $\frac{1}{\varepsilon_0}$ times the net charge enclosed by it: $\oint \vec{E}\cdot d\vec{S}=\frac{q}{\varepsilon_0}$.
A metallic wire having a resistance of $20\ \Omega$ is bent in order to form a complete circle. Calculate the resistance between any two diametrically opposite points on the circle.
Show answer
Answer
Formula used: Two resistors in parallel: 1/R = 1/R1 + 1/R2 with R1 = 10 ohm, R2 = 10 ohm, so R = 5 ohm
Given: $R=20\ \Omega$ for the whole circle. Each semicircle between two diametrically opposite points has $R_1=R_2=10\ \Omega$, and they are in parallel: $R_{eq}=\frac{10\times10}{10+10}=5\ \Omega$.
$d\vec{B}=\frac{\mu_0}{4\pi}\frac{I\,d\vec{l}\times\vec{r}}{r^3}$, where $I\,d\vec{l}$ is the current element and $\vec{r}$ is the position vector of the point from the element.
Pair production is the conversion of a high-energy gamma-ray photon (energy at least $1.02\ \text{MeV}$) into an electron and a positron while passing near a heavy nucleus.
A uniform copper wire having a cross sectional area of $1\text{ mm}^2$ carries a current of $5\text{ A}$. Calculate the drift speed of free electrons in it.
(Free electron number density of copper = $2 \times 10^{28}/\text{m}^3$.)
Show answer
Answer
Formula used: Current and drift velocity: I = n*e*area*vd with I = 5 A, e = 1.6e-19 C, n = 2e28 m^-3, area = 1e-6 m^2, so vd = 1.5625e-3 m s^-1
Write an expression for force per unit length between two long current carrying wires, kept parallel to each other, in vacuum and hence define an ampere, the SI unit of current.
Show answer
Answer
Force per unit length between two long parallel wires carrying currents $I_1$ and $I_2$ at separation $d$ in vacuum: $\frac{F}{l}=\frac{\mu_0 I_1 I_2}{2\pi d}$.
One ampere is that steady current which, flowing in each of two infinitely long straight parallel wires $1\ \text{m}$ apart in vacuum, produces a force of $2\times10^{-7}\ \text{N}$ per metre length on each.
Figure 1 below shows a metallic rod MN of length $l = 80\text{ cm}$, kept in a uniform magnetic field of flux density $B = 0\cdot5\text{ T}$, on two parallel metallic rails P and Q. Calculate the emf that will be induced between its two ends, when it is moved towards right with a constant velocity $v$ of $36\text{ km/hr}$.
Show answer
Answer
Formula used: Emf across a rod moving through a field: emf = B*l*v with B = 0.5 T, l = 0.8 m, v = 10 m s^-1, so emf = 4 V
When current flowing through one coil changes from $0\text{ Amp}$ to $15\text{ Amp}$ in $0\cdot2\text{ s}$, an emf of $750\text{ V}$ is induced in an adjacent coil. Calculate the coefficient of mutual inductance of the two coils.
Show answer
Answer
Formula used: Mutually induced emf: emf = M*dI/dt with dI = 15 A, dt = 0.2 s, emf = 750 V, so M = 10 H
Where will you keep an object in front of a:
Concave mirror to get a real and diminished image?
Show answer
Answer
Beyond the centre of curvature of the mirror ($u > 2f = R$); the image then forms between the focus and the centre of curvature, real, inverted and diminished.
Draw a labelled graph of angle of deviation ($\delta$) versus angle of incidence ($i$) for a prism.
Draw: Graph of angle of deviation ($\delta$) versus angle of incidence (i) for a prism
Show answer
Answer
The deviation first decreases as $i$ increases, reaches a minimum value $\delta_m$ when $i=e$ (the ray passes symmetrically through the prism), and then increases again.
Moving material particles have a wave nature: a particle of momentum $p$ is associated with a matter wave of wavelength $\lambda=\frac{h}{p}=\frac{h}{mv}$.
Calculate binding energy of oxygen nucleus ($^{16}_{8}\text{O}$) from the data given below:
Mass of a proton = $1\cdot007825\text{ u}$
Mass of a neutron = $1\cdot008665\text{ u}$
Mass of ($^{16}_{8}\text{O}$) = $15\cdot994915\text{ u}$
Show answer
Answer
Formula used: Binding energy from mass defect, and per nucleon: BE = dm*c2 with c2 = 931.5 MeV u^-1, dm = 0.137005 u, so BE = 127.6 MeV
With reference to communication systems, what is meant by:
modulation?
Show answer
Answer
Modulation is the process of superimposing the low-frequency message (information) signal on a high-frequency carrier wave, by varying one of the carrier's characteristics (amplitude, frequency or phase) in accordance with the message signal.
Show that intensity of electric field $E$ at a point in broadside on position is given by:
$E = \left(\frac{1}{4\pi\varepsilon_0}\right) \frac{p}{(r^2 + l^2)^{3/2}}$,
where the terms have their usual meaning.
Given: Electric dipole in broadside on position
To show: $E = \left(\frac{1}{4\pi\varepsilon_0}\right) \frac{p}{(r^2 + l^2)^{3/2}}$
Show answer
Answer
Derivation of the field of an electric dipole at a point on its equatorial (broadside on) line.
Let the dipole consist of charges $-q$ at A and $+q$ at B, separated by $2l$, with centre O and dipole moment $p=q\times2l$. Let P be a point on the equatorial line at distance $r$ from O.
Distance of P from each charge: $BP=AP=\sqrt{r^2+l^2}$.
By Coulomb's law, the field of $+q$ at P is $E_1=\frac{1}{4\pi\varepsilon_0}\frac{q}{r^2+l^2}$, directed along BP away from B.
Similarly the field of $-q$ at P is $E_2=\frac{1}{4\pi\varepsilon_0}\frac{q}{r^2+l^2}$, directed along PA towards A; so $E_1=E_2$.
Resolve each field along and perpendicular to the equatorial line: the components perpendicular to the dipole axis (along OP) are equal and opposite, so they cancel.
The components parallel to the axis (along BA) add, so $E=E_1\cos\theta+E_2\cos\theta=2E_1\cos\theta$, where $\cos\theta=\frac{l}{\sqrt{r^2+l^2}}$.
Since $q\times2l=p$: $E = \left(\frac{1}{4\pi\varepsilon_0}\right) \frac{p}{(r^2 + l^2)^{3/2}}$, directed parallel to the axis from B towards A (opposite to $\vec{p}$).
A parallel plate capacitor is charged by a battery, which is then disconnected. A dielectric slab having dielectric constant (relative permittivity) K, is now introduced between its two plates in order to occupy the space completely.
State, in terms of K, its effect on the following:
(i)[1]
The capacitance of the capacitor.
(ii)[1]
The potential difference between its plates.
(iii)[1]
The energy stored in the capacitor.
Show answer
Answer (i)
The capacitance increases $K$ times: $C'=KC$.
Answer (ii)
The potential difference decreases to $\frac{1}{K}$ of its value: $V'=\frac{V}{K}$ (the charge $Q$ stays constant, $V=Q/C$).
Answer (iii)
The energy stored decreases to $\frac{1}{K}$ of its value: $U'=\frac{Q^2}{2C'}=\frac{U}{K}$.
$E_1$ and $E_2$ are two batteries having emfs of $3\text{V}$ and $4\text{V}$ and internal resistances of $2\ \Omega$ and $1\ \Omega$ respectively. They are connected as shown in Figure 2 below. Using Kirchhoff’s Laws of electrical circuits, calculate the currents $I_1$ and $I_2$.
Show answer
Answer
From the figure, the loop ABEF contains $E_1=3\ \text{V}$ (total resistance $2+4=6\ \Omega$), the loop CBED contains $E_2=4\ \text{V}$ (total resistance $1+7=8\ \Omega$), and $R_3=8\ \Omega$ carries $I_1+I_2$ (Kirchhoff's current law at B).
Loop ABEF (Kirchhoff's voltage law): $3-6I_1-8(I_1+I_2)=0$, i.e. $14I_1+8I_2=3$.
Loop CBED: $4-8I_2-8(I_1+I_2)=0$, i.e. $2I_1+4I_2=1$.
Solving: $I_2=0.2\ \text{A}$, $I_1=0.1\ \text{A}$.
A potentiometer circuit is shown in Figure 3 below. AB is a uniform metallic wire having length of $2\text{ m}$ and resistance of $8\ \Omega$. The batteries $E_1$ and $E_2$ have emfs of $4\text{ V}$ and $1\cdot5\text{ V}$ and their internal resistances are $1\ \Omega$ and $2\ \Omega$ respectively.
(i)[2]
When the jockey J does not touch the wire AB, calculate:
(a) the current flowing through the potentiometer wire AB.
(b) the potential gradient across the wire AB.
(ii)[1]
Now the jockey J is made to touch the wire AB at a point C such that the galvanometer (G) shows no deflection. Calculate the length AC.
Show answer
Answer (i)
Given: $E_1=4\ \text{V}$, $r_1=1\ \Omega$, $R=7\ \Omega$, wire AB: $8\ \Omega$, $2\ \text{m}$. With no current in the $E_2$ branch, total resistance $=1+7+8=16\ \Omega$.
(a) $I=\frac{E_1}{16}=\frac{4}{16}=0.25\ \text{A}$.
(b) Potential difference across AB $=I\times8=2\ \text{V}$; potential gradient $k=\frac{2\ \text{V}}{2\ \text{m}}=1\ \text{V m}^{-1}$.
Final answer: 0.25 A; 1 V/m A; V m^-1
Answer (ii)
At balance no current flows through $E_2$, so its emf equals the potential drop across AC: $E_2=k\times AC$.
$AC=\frac{E_2}{k}=\frac{1.5\ \text{V}}{1\ \text{V m}^{-1}}$
For two thin lenses kept in contact with each other, show that:
$\frac{1}{F} = \frac{1}{f_1} + \frac{1}{f_2}$
where the terms have their usual meaning.
Given: Two thin lenses of focal lengths $f_1$ and $f_2$ placed in contact
To show: $\frac{1}{F} = \frac{1}{f_1} + \frac{1}{f_2}$
Show answer
Answer
Derivation of the focal length of two thin lenses in contact.
Let two thin lenses $L_1$ and $L_2$ of focal lengths $f_1$ and $f_2$ be placed in contact, with a common principal axis, and let a point object O be placed on the axis at distance $u$ from the combination.
The first lens alone forms an image $I_1$ at distance $v_1$; by the lens formula, $\frac{1}{v_1}-\frac{1}{u}=\frac{1}{f_1}$.
The lenses are thin and in contact, so $I_1$ acts as a (virtual) object for the second lens, at the same distance $v_1$ from it.
The second lens forms the final image I at distance $v$; by the lens formula, $\frac{1}{v}-\frac{1}{v_1}=\frac{1}{f_2}$.
Adding the two equations, the term $\frac{1}{v_1}$ cancels: $\frac{1}{v}-\frac{1}{u}=\frac{1}{f_1}+\frac{1}{f_2}$.
If the combination is replaced by a single lens of focal length $F$ forming the image at the same place, $\frac{1}{v}-\frac{1}{u}=\frac{1}{F}$.
A compound microscope consists of two convex lenses having focal length of $1\cdot5\text{ cm}$ and $5\text{ cm}$. When an object is kept at a distance of $1\cdot6\text{ cm}$ from the objective, the final image is virtual and lies at a distance of $25\text{ cm}$ from the eyepiece. Calculate magnifying power of the compound microscope in this set-up.
Show answer
Answer
Formulas used: Lens formula and magnification: 1/v - 1/u = 1/f with f = 1.5 cm, u = -1.6 cm, so v = 24 cm
Compound microscope, image at the near point (sizes, no signs): m = (vo/uo)*(1 + D/fe) with D = 25 cm, fe = 5 cm, uo = 1.6 cm, vo = 24 cm, so m = 90
Given: $f_o=1.5\ \text{cm}$, $f_e=5\ \text{cm}$, $u_o=-1.6\ \text{cm}$, final image at $D=25\ \text{cm}$.
Objective: $\frac{1}{v_o}=\frac{1}{f_o}+\frac{1}{u_o}=\frac{1}{1.5}-\frac{1}{1.6}$, so $v_o=24\ \text{cm}$.
Magnifying power with the image at the near point: $m=\frac{v_o}{|u_o|}\left(1+\frac{D}{f_e}\right)=\frac{24}{1.6}\left(1+\frac{25}{5}\right)=15\times6$
In Young’s double slit experiment, the screen is kept at a distance of $1\cdot2\text{ m}$ from the plane of the slits. The two slits are separated by $5\text{ mm}$ and illuminated with monochromatic light having wavelength $600\text{ nm}$. Calculate:
(i)[1.5]
Fringe width i.e. fringe separation of the interference pattern.
(ii)[1.5]
Distance of 10th bright fringe from the centre of the pattern.
Show answer
Answer (i)
Formula used: Young's double slit: fringe width: beta = lam*D/d with lam = 6e-7 m, D_cap = 1.2 m, d_small = 5e-3 m, so beta = 1.44e-4 m
Formula used: Young's double slit: the nth bright fringe from the centre: y = n*lam*D/d with n = 10, lam = 6e-7 m, D_cap = 1.2 m, d_small = 5e-3 m, so y = 1.44e-3 m
Distance of the $n$th bright fringe: $y_n=n\beta=\frac{n\lambda D}{d}$; for $n=10$: $y_{10}=10\times1.44\times10^{-4}\ \text{m}$
Draw the energy level diagram of hydrogen atom and show the transitions responsible for:
Draw: Energy level diagram of hydrogen atom showing Lyman and Balmer transitions
Must show: Energy levels for n=1, 2, 3, ... with energies, Absorption lines of Lyman series, Emission lines of Balmer series
(i)[1.5]
absorption lines of Lyman series.
(ii)[1.5]
emission lines of Balmer series.
Show answer
Answer (i)
Energy levels of hydrogen drawn as horizontal lines with $E_n=-\frac{13.6}{n^2}\ \text{eV}$ ($n=1$: $-13.6$ eV, $n=2$: $-3.4$ eV, $n=3$: $-1.51$ eV, $n=4$: $-0.85$ eV, $n=\infty$: 0). Absorption lines of the Lyman series: upward arrows from $n=1$ to $n=2, 3, 4,\dots$
Answer (ii)
Same energy level diagram. Emission lines of the Balmer series: downward arrows from $n=3, 4, 5,\dots$ to $n=2$.
State any one difference between energy band diagram of conductors and that of insulators.
Show answer
Answer
In a conductor the valence and conduction bands overlap (no forbidden energy gap), whereas in an insulator they are separated by a large energy gap (greater than about $3\ \text{eV}$).
A $400\ \Omega$ resistor, a $3\text{ H}$ inductor and a $5\ \mu\text{F}$ capacitor are connected in series to a $220\text{ V}, 50\text{ Hz}$ ac source. Calculate the:
(1) Impedance of the circuit.
(2) Current flowing through the circuit.
(ii)[2]
Draw a labelled graph showing the variation of impedance ($Z$) of a series LCR circuit versus frequency ($f$) of the ac supply.
Draw: Graph of impedance (Z) versus frequency (f) for a series LCR circuit
Show answer
Answer (i)
Formulas used: Series LCR circuit from L, C and f: Z = sqrt(R**2 + (XL - XC)**2) with C = 5e-6 F, L = 3 H, R = 400 ohm, f = 50 Hz, so Z = 503.5 ohm
Ohm's law: V = I*R with R = 503.5 ohm, V = 220 V, so I = 0.437 A
Final answer: $Z = 503.5\ \Omega,\ I = 0.437\ \text{A}$
Answer (ii)
$Z$ falls as $f$ increases, reaches its minimum value $Z=R$ at the resonant frequency $f_0=\frac{1}{2\pi\sqrt{LC}}$ (where $X_L=X_C$), and then rises again.
When an alternating emf $e = 310 \sin(100\pi t)\text{ V}$ is applied to a series LCR circuit, current flowing through it is $i = 5 \sin(100\pi t + \pi/3)\text{ A}$.
(1) What is the phase difference between the current and the emf?
(2) Calculate the average power consumed by the circuit.
(ii)[2]
Obtain an expression for the resonant frequency ($f_0$) of a series LCR circuit.
Given: At resonance in a series LCR circuit, $X_L = X_C$
To show: $f_0 = \frac{1}{2\pi\sqrt{LC}}$
Show answer
Answer (i)
Formula used: Average power in an AC circuit (rms values): P = V*I*pf with I = 3.5355 A, V = 219.2 V, pf = 0.5, so P = 387.5 W
Given: $e=310\sin(100\pi t)$, $i=5\sin(100\pi t+\pi/3)$, so $E_0=310\ \text{V}$, $I_0=5\ \text{A}$.
(1) Phase difference between current and emf $\phi=\frac{\pi}{3}$ ($60^\circ$), the current leading the emf.
(2) $P_{av}=E_{rms}I_{rms}\cos\phi=\frac{310}{\sqrt2}\times\frac{5}{\sqrt2}\times\cos60^\circ=775\times0.5\ \text{W}$
Final answer: $\phi = \pi/3,\ P = 387.5\ \text{W}$
Answer (ii)
Derivation of the resonant frequency of a series LCR circuit.
At resonance the current is maximum and the impedance is minimum, which happens when $X_L=X_C$ (the reactances cancel and $Z=R$).
Substitute $X_L=\omega_0L$ and $X_C=\frac{1}{\omega_0C}$: $\omega_0L=\frac{1}{\omega_0C}$.
Hence $\omega_0^2=\frac{1}{LC}$, so $\omega_0=\frac{1}{\sqrt{LC}}$.
With $\omega_0=2\pi f_0$: $f_0 = \frac{1}{2\pi\sqrt{LC}}$.
Derive an expression for refraction at a single (convex) spherical surface, i.e. a relation between $u$, $v$, $R$, $n_1$ (rarer medium) and $n_2$ (denser medium), where the terms have their usual meaning.
Given: A spherical convex surface separating a rarer medium of refractive index $n_1$ from a denser medium of refractive index $n_2$
To show: $\frac{n_2}{v} - \frac{n_1}{u} = \frac{n_2 - n_1}{R}$
(ii)[1]
Name the phenomenon due to which the sun appears reddish at sunset.
Show answer
Answer (i)
Refraction at a single convex spherical surface (rarer medium $n_1$ to denser medium $n_2$), using New Cartesian sign convention and small apertures (paraxial rays).
Let XPY be a convex spherical surface of centre of curvature C and radius $R$, separating a rarer medium $n_1$ from a denser medium $n_2$. A point object O on the principal axis, at distance $u$ from the pole P, forms an image I at distance $v$ in the second medium. Take a ray OA meeting the surface at A, refracted along AI; let the angles be $\alpha$ (AO with axis), $\beta$ (AI with axis), $\gamma$ (AC with axis), and the angle of incidence $i$ and refraction $r$.
In triangle OAC, the exterior angle gives $i=\alpha+\gamma$.
In triangle AIC, the exterior angle gives $\gamma=r+\beta$, so $r=\gamma-\beta$.
By Snell's law, $n_1\sin i=n_2\sin r$; for small angles $n_1 i=n_2 r$, so $n_1(\alpha+\gamma)=n_2(\gamma-\beta)$.
For paraxial rays, with M the foot of the perpendicular from A on the axis and P close to M: $\alpha\approx\frac{AM}{MO}=\frac{AM}{-u}$ in magnitude $\frac{AM}{u}$, $\beta\approx\frac{AM}{v}$, $\gamma\approx\frac{AM}{R}$.
Applying the New Cartesian signs ($u$ negative, $v$ and $R$ positive here), $\alpha=-\frac{AM}{u}$, $\beta=\frac{AM}{v}$, $\gamma=\frac{AM}{R}$.
Substitute in $n_1(\alpha+\gamma)=n_2(\gamma-\beta)$ and divide by AM: $n_1\left(-\frac{1}{u}+\frac{1}{R}\right)=n_2\left(\frac{1}{R}-\frac{1}{v}\right)$.
Draw a labelled graph of intensity of diffracted light ($I$) versus angle ($\theta$) in the Fraunhofer diffraction experiment for a single slit diffraction.
Draw: Graph of intensity of diffracted light (I) versus angle ($\theta$) in Fraunhofer diffraction by a single slit
(ii)[1.5]
State the law of Malus.
(iii)[1.5]
How will you distinguish experimentally between ordinary light and plane polarized light?
Show answer
Answer (i)
The intensity is a maximum at $\theta=0$ (central maximum, twice as wide as the others) and is symmetric on both sides; it falls to zero at $\sin\theta=\pm\frac{n\lambda}{a}$ ($n=1,2,\dots$), with weak secondary maxima in between.
Answer (ii)
Law of Malus: when plane polarised light of intensity $I_0$ passes through an analyser, the intensity of the transmitted light is $I=I_0\cos^2\theta$, where $\theta$ is the angle between the pass axes of the polariser and analyser.
Answer (iii)
View the light through a Polaroid (analyser) and rotate it slowly in its own plane.
1. For ordinary (unpolarised) light the intensity of the transmitted light stays the same.
2. For plane polarised light the intensity varies and becomes zero twice in one complete rotation.
In a semiconductor diode, what is meant by potential barrier?
(ii)[2]
Draw a labelled circuit diagram of a Zener diode as a voltage regulator.
Draw: Circuit diagram of a Zener diode as a voltage regulator
Must show: Unregulated DC input voltage, Series resistor R_s, Zener diode connected in reverse bias across load, Load resistor R_L, Regulated DC output voltage across R_L
(iii)[1.5]
Show with the help of a diagram, how you will obtain an AND gate using only NAND gates. (Truth table is not required.)
Draw: Logic circuit showing how an AND gate is obtained using only NAND gates
Must show: First NAND gate with inputs A and B, Second NAND gate acting as inverter connected to output of first NAND gate, Final output Y = A \cdot B
Show answer
Answer (i)
The potential barrier is the potential difference developed across the p-n junction (by the diffusion of charge carriers and the immobile ions in the depletion region) which opposes further diffusion of majority carriers across the junction.
Answer (ii)
Worked out by the server: every current and potential difference
Part
Current
p.d.
E1
0.049 A
10 V
R1
0.049 A
4.9 V
Z1
0.0439 A
5.1 V
R2
0.0051 A
5.1 V
Zener diode regulator: the unregulated dc input is connected through a series resistor $R_s$ to the Zener diode, which is connected in reverse bias (cathode to the positive side) across the load $R_L$; the regulated output $V_Z$ is taken across $R_L$ (which is in parallel with the Zener diode).
Answer (iii)
An AND gate from NAND gates only: the output of the first NAND gate (inputs A and B) is fed to both inputs of a second NAND gate, which acts as a NOT gate. Output $Y=A\cdot B$.
Draw a labelled circuit diagram of a transistor acting as a common emitter amplifier. What is meant by phase reversal?
Draw: Circuit diagram of an npn or pnp transistor acting as a common emitter amplifier
Must show: Common emitter configuration with emitter grounded, Base-emitter forward biased with input signal, Collector-emitter reverse biased with output across load, Input AC signal and inverted 180 degree out-of-phase output signal
(ii)[2]
Draw the symbol of a NAND gate and write its truth table.
Draw: Logic symbol of a 2-input NAND gate
Must show: AND gate shape with inversion bubble at output, Two input lines labelled A and B, Output line labelled Y
Show answer
Answer (i)
Common emitter amplifier using an npn transistor: emitter connected to ground (common to input and output); the base-emitter junction is forward biased by $V_{BB}$ through $R_B$, with the ac input signal $V_i$ applied between base and emitter through a capacitor; the collector is connected to $V_{CC}$ through the load $R_L$ (collector-emitter reverse biased) and the amplified output $V_o$ is taken between collector and emitter through a capacitor.
Phase reversal: the output voltage is $180^\circ$ out of phase with the input voltage (when the input rises, the output falls and vice versa).
Answer (ii)
NAND gate symbol: an AND gate shape with a small circle (bubble) at the output, inputs $A$ and $B$, output $Y=\overline{A\cdot B}$.
Truth table:
A
B
Y
0
0
1
0
1
1
1
0
1
1
1
0
About this board paper
The ISC Physics 2020 Question Paper is a board paper for Class 12: 48 questions in printed order, 70 marks in all, asked from 17 chapters. The board paper is the exam itself: the question paper CISCE set for that year’s ISC candidates. Solve it in one sitting, in the time allowed, to see how questions are worded and how hard the real paper is.
The layout of the current Physics paper (sections, marks, choices) is in the paper pattern guide.
By section
Section
Questions
Marks printed*
A
12
12
B
19
26
C
11
27
D
6
30
By kind of question
Kind
Questions
Marks printed*
Numerical
12
33
Short answer
22
25
Drawing
3
13
Derivation
3
11
Graph
2
7
MCQ
5
5
One word
1
1
By chapter
Chapter
Questions
Marks printed*
Ray Optics and Optical Instruments
8
17
Current Electricity
5
11
Alternating Current
2
10
Wave Optics
3
9
Nuclei
4
5
Junction transistor
1
5
Semiconductor diode
1
5
Dual Nature of Radiation and Matter
4
4
Moving charges and magnetism
3
4
Electric Charges and Fields
2
4
Electromagnetic Induction
2
4
Electrostatic Potential, Potential Energy and Capacitance
2
4
Magnetism and Matter
3
3
Semiconductor Electronics: Materials, Devices and Simple Circuits
3
3
Atoms
1
3
Communication Systems
2
2
Electromagnetic Waves
2
2
* Marks are those printed on each question; where a question offers an either-or choice, both options are counted, so the totals can come to more than the paper’s own total.
Common questions
How many questions are in the ISC Physics 2020 Question Paper?
48 questions, 70 marks in all, shown in full and in printed order on this page.
Which chapters does the ISC Physics 2020 Question Paper ask most about?
By number of questions: Ray Optics and Optical Instruments (8), Current Electricity (5), Nuclei (4) and Dual Nature of Radiation and Matter (4).
Does this page have the answers to the ISC Physics 2020 Question Paper?
Tap “Show answer” under a question to see its answer. The download button saves the paper as a PDF, with or without the answers.