Prashnikaप्रश्निका
Code
About
ChemistryCFQClass 12

ISC Chemistry 2025 Competency Focused Questions (CFQ) with Answers

The ISC Chemistry 2025 Competency Focused Questions (CFQ) for Class 12: all 116 questions, in printed order and in full. It is free to download: tap "Show answer" under a question to see its answer, or use the download button to save the questions as a PDF, with or without answers; "Print this paper" below prints it as it was set.

116questions
21chapters
Q11 mark · MCQOpen: Which of the following reactions will NOT form an ether through Williamson's…

Choose the correct option.

Which of the following reactions will NOT form an ether through Williamson's synthesis? I: $\text{C}_2\text{H}_5\text{ONa} + \text{CH}_3\text{Br} \rightarrow$ II: $\text{C}_6\text{H}_5\text{Cl} + \text{C}_2\text{H}_5\text{ONa} \rightarrow$ III: $\text{C}_6\text{H}_5\text{ONa} + \text{CH}_3\text{I} \rightarrow$ IV: $\text{C}_2\text{H}_5\text{ONa} + (\text{CH}_3)_3\text{C—Br} \rightarrow$
  • (a)I and III
  • (b)II and III
  • (c)III and IV
  • (d)II and IV
Show answer

Answer

Official answer key

Correct option: (d)

(d) II and IV
Q31 mark · MCQOpen: For the reaction: What are X and R respectively in the given reaction?

Choose the correct option.

For the reaction: What are X and R respectively in the given reaction?
  • (a)X: Acetaldehyde, R: methyl
  • (b)X: Formaldehyde, R: methyl
  • (c)X: Acetaldehyde, R: ethyl
  • (d)X: Formaldehyde, R: ethyl
Figure for this question
Show answer

Answer

Official answer key

Correct option: (d)

(d) X: Formaldehyde R: ethyl
Q61 mark · MCQOpen: Which of the following is most basic?

Choose the correct option.

Which of the following is most basic?
  • (a)Aniline
  • (b)Ethylamine
  • (c)Ammonia
  • (d)Benzylamine
Show answer

Answer

Official answer key

Correct option: (b)

(b) Ethylamine
Q71 mark · MCQOpen: Depression in freezing point is a colligative property. At the same…

Choose the correct option.

Depression in freezing point is a colligative property. At the same concentration in aqueous solution, select the solution that will show the largest freezing point depression.
  • (a)$\text{Na}_3\text{PO}_4$
  • (b)$\text{C}_{12}\text{H}_{22}\text{O}_{11}$
  • (c)$\text{NaCl}$
  • (d)$\text{K}_2\text{SO}_4$
Show answer

Answer

Official answer key

Correct option: (a)

(a) Na3PO4
Q91 mark · MCQOpen: If Sodium nitrate is completely dissociated into cations and anions in aqueous…

Choose the correct option.

If Sodium nitrate is completely dissociated into cations and anions in aqueous solution, the change in freezing point of water ($\Delta T_f$), when $0.05\text{ mol}$ of sodium nitrate is dissolved in $1\text{ kg}$ of water is: ($K_f = 1.86\text{ K kg mol}^{-1}$)
  • (a)0.1860
  • (b)1.860
  • (c)0.0186
  • (d)0.279
Show answer

Answer

Official answer key

Correct option: (a)

(a) 0.1860
Q101 mark · MCQOpen: For a reaction A → B + C, when a student X doubled the concentration of ‘A’…

Choose the correct option.

For a reaction $\text{A} \rightarrow \text{B} + \text{C}$, when a student X doubled the concentration of ‘A’, the rate of reaction was found to increase by eight times. The unit of rate constant ($k$) will be:
  • (a)$\text{s}^{-1}$
  • (b)$\text{mol}^{-1}\text{L s}^{-1}$
  • (c)$\text{mol}^{-2}\text{L}^2\text{s}^{-1}$
  • (d)$\text{mol L}^{-1}\text{s}^{-1}$
Show answer

Answer

Official answer key

Correct option: (c)

(c) mol-2L2s-1
Q111 mark · MCQOpen: Which of the following combinations is INCORRECT regarding order and…

Choose the correct option.

Which of the following combinations is INCORRECT regarding order and molecularity of a hypothetical reaction?
  • (a)order = 2, molecularity = 1
  • (b)order = 3/2, molecularity = 2
  • (c)order = 1, molecularity = 2
  • (d)order = 1/2, molecularity = 3/2
Show answer

Answer

Official answer key

Correct option: (d)

(d) order = ½ molecularity = 3/2
Q141 mark · MCQOpen: The reaction of the compound A with NH₃ gives an aromatic amine B. This amine…

Choose the correct option.

The reaction of the compound A with $\text{NH}_3$ gives an aromatic amine B. This amine on treatment with nitrous acid forms a diazonium salt which is used in the preparation of A. Identify A and B.
  • (a)$\text{C}_6\text{H}_5\text{NH}_2$ and $\text{C}_6\text{H}_5\text{Cl}$
  • (b)$\text{C}_6\text{H}_5\text{Cl}$ and $\text{C}_6\text{H}_5\text{OH}$
  • (c)$\text{C}_6\text{H}_5\text{CN}$ and $\text{C}_6\text{H}_5\text{Cl}$
  • (d)$\text{C}_6\text{H}_5\text{Cl}$ and $\text{C}_6\text{H}_5\text{NH}_2$
Show answer

Answer

Official answer key

Correct option: (d)

(d) C6H5Cl and C6H5NH2
Q151 mark · MCQOpen: Rahul wants to prepare chloroform in the laboratory using ethanol. The correct…

Choose the correct option.

Rahul wants to prepare chloroform in the laboratory using ethanol. The correct order of preparation is:
  • (a)oxidation, liberation of $\text{Cl}_2$, hydrolysis and chlorination.
  • (b)liberation of $\text{Cl}_2$, oxidation, chlorination, hydrolysis.
  • (c)hydrolysis, oxidation, chlorination, liberation of chlorine.
  • (d)chlorination, hydrolysis, oxidation, liberation of chlorine.
Show answer

Answer

Official answer key

Correct option: (b)

(b) liberation of Cl2, oxidation, chlorination, hydrolysis.
Q161 mark · MCQOpen: The C-X bond length in haloarenes is shorter due to:

Choose the correct option.

The C-X bond length in haloarenes is shorter due to:
  • (a)resonance with Benzene ring.
  • (b)formation of carbocation.
  • (c)Van der Waals forces.
  • (d)polarisation of bond.
Show answer

Answer

Official answer key

Correct option: (a)

(a) resonance with Benzene ring.
Q181 mark · MCQOpen: The above graph indicates the variation of molar conductivity of different…

Choose the correct option.

The above graph indicates the variation of molar conductivity of different electrolytes. $\text{NaCl}$, $\text{CH}_3\text{COOH}$, $\text{KCl}$ represented as I, II, and III respectively. The order of increase in molar conductivity with concentration is:
  • (a)(II), (III), (I)
  • (b)(I), (III), (II)
  • (c)(III), (II), (I)
  • (d)(III), (I), (II)
Figure for this question
Show answer

Answer

Official answer key

Correct option: (c)

(c) III, II, and I
Q191 mark · MCQOpen: On adding silver nitrate solution to CoBr₂Cl· 4NH₃, 1 mole of light-yellow…

Choose the correct option.

On adding silver nitrate solution to $\text{CoBr}_2\text{Cl}\cdot 4\text{NH}_3$, 1 mole of light-yellow precipitate of compound X is obtained. Which of the following statement explains this?
  • (a)2 bromine atoms are linked by primary valency.
  • (b)2 bromine atoms are linked by secondary valency.
  • (c)1 bromine atom is linked by primary valency.
  • (d)1 chlorine atom is linked by primary valency.
Show answer

Answer

Correct option: (c)

Answer: (c) 1 bromine atom is linked by primary valency. The light-yellow precipitate with silver nitrate is AgBr; only the bromide outside the coordination sphere (the ionisable, primary valency) is precipitated, and 1 mole of precipitate means 1 mole of ionic bromide. The complex is $[\mathrm{CoBrCl(NH_3)_4}]\mathrm{Br}$: one bromine is ionic (primary valency) and the other bromine and the chlorine are bonded inside the sphere (secondary valency).
Q201 mark · MCQOpen: Gia applied magnetic field around [Fe(H₂O)₆]²⁺ and [Fe(CN)₆]⁴⁻, she found that…

Choose the correct option.

Gia applied magnetic field around $[\text{Fe}(\text{H}_2\text{O})_6]^{2+}$ and $[\text{Fe}(\text{CN})_6]^{4-}$, she found that $[\text{Fe}(\text{H}_2\text{O})_6]^{2+}$ is strongly attracted towards magnet. Which of the following explains this correctly? (P) $\text{CN}^-$ is a weak ligand. (Q) $\text{H}_2\text{O}$ is a weak ligand. (R) $[\text{Fe}(\text{H}_2\text{O})_6]^{2+}$ is inner orbital complex. (S) $[\text{Fe}(\text{CN})_6]^{4-}$ is low spin complex.
  • (a)Only (S)
  • (b)Both (P) and (Q)
  • (c)Only (R)
  • (d)Both (Q) and (S)
Show answer

Answer

Official answer key

Correct option: (d)

(d) Both (Q) and (S)
Q211 mark · MCQOpen: Toluene reacts with chromyl chloride in CCl₄ to give compound (X). Which of the…

Choose the correct option.

Toluene reacts with chromyl chloride in $\text{CCl}_4$ to give compound (X). Which of the following test is most likely to be shown by compound (X)?
  • (a)Yellow precipitate of iodoform
  • (b)Brick red precipitate by Fehling solution
  • (c)Silver mirror by Tollen’s test
  • (d)Orange red dye by coupling reaction
Show answer

Answer

Official answer key

Correct option: (c)

(c) Silver mirror by Tollen’s test.
Q221 mark · MCQOpen: Which of the following compound is the most and least reactive towards…

Choose the correct option.

Which of the following compound is the most and least reactive towards nucleophilic substitution reaction respectively? (I) Acetone (II) Benzaldehyde (III) Formaldehyde (IV) Acetophenone
  • (a)(III) and (IV)
  • (b)(I) and (II)
  • (c)(II) and (I)
  • (d)(IV) and (III)
Show answer

Answer

Official answer key

Correct option: (a)

(a) (III) & (IV)
Q231 mark · MCQOpen: From a plot of rate (Y-axis) and concentration (X- axis), a student concluded…

Choose the correct option.

From a plot of rate (Y-axis) and concentration (X- axis), a student concluded that the order of reaction is zero. What he must have observed in the graph?
  • (a)A parallel line with X axis.
  • (b)A line passing from the origin with positive slope.
  • (c)A line with negative slope with an intercept.
  • (d)A zig zag curve.
Show answer

Answer

Official answer key

Correct option: (a)

(a) A parallel line with X axis.
Q241 mark · Assertion-reasonOpen: Electrophilic substitution reactions in haloarenes takes place in ortho and…

Study the Assertion and Reason and choose the correct option.

Assertion: Electrophilic substitution reactions in haloarenes takes place in ortho and para positions and the major product is para substituted haloarenes.

Reason: The halogen in the ring is not ortho and para directing, and the yield is more of para because of resonance stabilisation.

  • (a)Both Assertion (A) and Reason (R) are correct, and Reason (R) is the correct explanation of the Assertion (A).
  • (b)Both Assertion (A) and Reason (R) are correct, and Reason (R) is not the correct explanation of the Assertion (A).
  • (c)Assertion (A) is true, but Reason (R) is false.
  • (d)Assertion (A) is false, but Reason (R) is true.
Show answer

Answer

Official answer key

Correct option: (c)

(c) Assertion (A) is true, but Reason (R) is false.
Q251 mark · Assertion-reasonOpen: Benzaldehyde on nitration gives Ortho and para nitro benzaldehyde.

Study the Assertion and Reason and choose the correct option.

Assertion: Benzaldehyde on nitration gives Ortho and para nitro benzaldehyde.

Reason: -CHO group in benzaldehyde shows –I effect and benzene ring shows +R effect.

  • (a)Both Assertion (A) and Reason (R) are correct, and Reason (R) is the correct explanation of Assertion (A).
  • (b)Both Assertion (A) and reason (R) are correct, but Reason (R) is not the correct explanation of Assertion (A).
  • (c)Assertion (A) is true, but Reason (R) is false.
  • (d)Assertion (A) is false, but Reason (R) is true.
Show answer

Answer

Official answer key

Correct option: (d)

(d) Assertion (A) is false, but Reason (R) is true.
Q261 mark · Assertion-reasonOpen: The half-life of a first order reaction does not depend on initial…

Study the Assertion and Reason and choose the correct option.

Assertion: The half-life of a first order reaction does not depend on initial concentration of the reactant.

Reason: The initial reaction expression is present in the expression for rate constant.

  • (a)Both Assertion (A) and Reason (R) are correct, and Reason (R) is the correct explanation of Assertion (A).
  • (b)Both Assertion(A) and Reason (R) are correct, but Reason (R) is not the correct explanation of Assertion (A).
  • (c)Assertion (A) is true, but Reason (R) is false.
  • (d)Assertion (A) is false, but Reason (R) is true.
Show answer

Answer

Official answer key

Correct option: (c)

(c) The Assertion (A) is true, but Reason (R) is false.
Q271 mark · Assertion-reasonOpen: Ethanol is less acidic than water.

Study the Assertion and Reason and choose the correct option.

Assertion: Ethanol is less acidic than water.

Reason: The electron releasing inductive effect of the ethyl group decreases the acidic character.

  • (a)Both Assertion (A) and Reason (R) are correct, and Reason (R) is the correct explanation of Assertion (A).
  • (b)Both Assertion (A) and Reason (R) are correct, but Reason (R) is not the correct explanation of Assertion (A).
  • (c)Assertion (A) is true, but Reason (R) is false.
  • (d)Assertion (A) is false, but Reason (R) is true.
Show answer

Answer

Official answer key

Correct option: (a)

(a) Assertion (A) and Reason (R) both are correct statements and Reason (R) is the correct explanation for Assertion (A).
Q281 mark · Assertion-reasonOpen: Nucleic acids are present in all living cells.

Study the Assertion and Reason and choose the correct option.

Assertion: Nucleic acids are present in all living cells.

Reason: They are not responsible for passing the genetic information from the parent cell to the new cell.

  • (a)Both Assertion (A) and Reason (R) are correct, and Reason (R) is the correct explanation of Assertion (A).
  • (b)Both Assertion (A) and Reason (R) are correct, but Reason (R) is not the correct explanation of Assertion (A).
  • (c)Assertion (A) is true, but Reason (R) is false.
  • (d)Assertion (A) is false, but Reason (R) is true.
Show answer

Answer

Official answer key

Correct option: (c)

(c) The Assertion (A) is true, but Reason (R) is false.
Q392 marks · Short answerOpen: The boiling point (b.p.) of methyl amine, ethane and methanol is 265K, 185K and…

Answer the following.

The boiling point (b.p.) of methyl amine, ethane and methanol is 265K, 185K and 333K respectively. How can one account for these different boiling points?
Show answer

Answer

Official answer key
The boiling points are directly linked with H-bond. Greater is the extent of H-bond formation, higher is the boiling point (b.p.). Methylamine, $\mathrm{CH_3NH_2}$, has two polar N-H bonds, due to which it forms intermolecular H-bond. In methanol, $\mathrm{CH_3OH}$, H-bonding is through the oxygen atom which is more electronegative than N-atom of amines. Therefore, N-H---N bonds are much weaker than O-H---O bonds. Hydrocarbons, ethane, $\mathrm{C_2H_6}$, does not have any electronegative atom.
Q402 marks · Coordination complexOpen: Do you think [Co(en)₃]³⁺ will show optical isomerism? If yes, draw the possible…

Answer the following about the coordination compound.

Do you think $[\text{Co}(\text{en})_3]^{3+}$ will show optical isomerism? If yes, draw the possible isomers and name them. If no, explain why?
Show answer

Answer

Official answer key
Isomerismgeometrical: None, optical: yes
Yes, d and l forms to be drawn, d-tris(ethylenediamine)cobalt (III) ion and l-tris(ethylenediamine)cobalt (III) ion.
Q412 marks · Short answerOpen: Based on Valence Bond Theory (VBT), discuss the hybridisation, shape and charge…

Answer the following.

Based on Valence Bond Theory (VBT), discuss the hybridisation, shape and charge on metal in $[\text{Ni}(\text{CO})_4]$ complex. Do you think, charge of copper metal will be same or different in $[\text{Cu}(\text{CO})_4]$?
Show answer

Answer

Official answer key
$sp^3$, tetrahedral, zero, yes, the charge will be zero.
Q422 marks · Short answerOpen: Two students X and Y were studying the basicity of compounds. X wrote that…

Answer the following.

Two students X and Y were studying the basicity of compounds. X wrote that ammonia is less basic than methylamine whereas Y wrote that ammonia is more basic than methylamine. According to you, whose answer is correct? How have you concluded this?
Show answer

Answer

Official answer key
X is correct. Due to +I effect of methyl group, electron density at nitrogen atom increases. This increases the availability of N to potential acid thereby increasing the basicity.
Q43(a)1 mark · DifferentiateOpen: Ethyl amine and diethyl amine.

Give a chemical test to distinguish between the following.

Ethyl amine and diethyl amine.
Show answer

Answer

Official answer key

Carbylamine test test: reagent: CHCl3 and alc. KOH, heat; positive: ethyl amine; observation: obnoxious smell of carbylamine (isocyanide); other: diethylamine does not give the test

Carbylamine test, ethyl amine will give obnoxious smell of carbylamine when treated with $\mathrm{CHCl_3}$ and alc. KOH, whereas the diethylamine would not give the test.
Q43(b)1 mark · DifferentiateOpen: Ethanol and ethyl amine.

Give a chemical test to distinguish between the following.

Ethanol and ethyl amine.
Show answer

Answer

Official answer key

Iodoform test test: reagent: I2 and KOH (NaOH), warm; positive: ethanol; observation: yellow ppt of iodoform; other: ethyl amine does not give the test

Ethanol gives iodoform test, yellow ppt with $\mathrm{I_2}$ and KOH, when heated; ethyl amine will not give this test.
Q472 marks · NumericalOpen: Find the three-fourths life, t_(3/4) of a first order reaction, k=7.4× 10⁻⁵ s⁻¹.

Solve the following.

Find the three-fourths life, $t_{3/4}$ of a first order reaction, $k=7.4\times 10^{-5}\text{ s}^{-1}$.
Show answer

Answer

Official answer key
$k=\frac{2.303}{t}\log\frac{a}{a-x}$ 3/4th life: $a-x=a-\frac{3}{4}a$ $t_{3/4}=\frac{2.303}{7.4\times10^{-5}}\log\frac{a}{\frac{1}{4}a}=\frac{2.303}{7.4\times10^{-5}}\log 4=\frac{2.303}{7.4\times10^{-5}}\times 0.6020=1.87\times10^{4}\,\mathrm{s}$

Final answer: $1.87\times10^{4}$ s

Q482 marks · Short answerOpen: Study the graph given below and label the numbers:

Answer the following.

Study the graph given below and label the numbers:
Figure for this question
Show answer

Answer

Official answer key
(1) Potential Energy (2) Reactants (3) Activation Energy (4) Products (5) Reaction Coordinate
Q492 marks · Short answerOpen: Rohan arranged three coulometers in series and passed one faraday of charge for…

Answer the following.

Rohan arranged three coulometers in series and passed one faraday of charge for a definite time to all three electrolytes as shown in the picture given below:
Figure for this question
(a)[1]
What will be ratio of number of moles of positive ions liberated at cathode in each coulometer?
(b)[1]
If he passed 4825 coulombs of charge through the electrolytes, how many gram-equivalent of copper will be deposited at the cathode?
Show answer

Answer (a)

Official answer key
1: 1: 2

Answer (b)

Official answer key
1 g-equivalent = 96500 C x g-equivalent = 4825 C $=\frac{4825}{96500}=0.05$ g-equivalent.

Final answer: 0.05 g-equivalent

Q502 marks · Short answerOpen: Yash measures the conductivity of two different solutions of 1M Ethanoic acid…

Answer the following.

Yash measures the conductivity of two different solutions of 1M Ethanoic acid and 1M HCl each at $25^\circ\text{C}$.
(a)[1]
Will he observe the same conductivity value for both the solutions? Justify your answer.
(b)[1]
What will be the effect on conductivities when he keeps on diluting the solutions? Explain with the help of a graph.
Show answer

Answer (a)

Official answer key
No, the conductivity of 1 M HCl will be greater than 1M ethanoic acid. As it is a strong acid, complete ionization will occur so the number of ions will be more.

Answer (b)

Official answer key
Graph of molar conductivity ($\lambda_m$, y-axis) against $\sqrt{C}$ (x-axis): HCl is a straight line rising slowly as the solution is diluted; $\mathrm{CH_3COOH}$ is a curve that rises very steeply at low concentration (high dilution).
Q512 marks · Short answerOpen: The standard reduction potentials of the following electrodes are given below…

Answer the following.

The standard reduction potentials of the following electrodes are given below. Answer the questions that follow:
ElectrodesSRP values
$\text{Fe}^{2+}/\text{Fe}$-0.44V
$\text{Mg}^{2+}/\text{Mg}$-2.37V
$\text{I}_2/2\text{I}^-$+0.54V
$\text{Ag}^+/\text{Ag}$+0.88V
(a)[1]
Which substance/s could be used to convert iodide ions to iodine?
(b)[1]
From the given reactions which reaction is spontaneous and why? I: $\text{Fe}^{2+} + 2\text{Ag} \rightarrow 2\text{Ag}^{+1} + \text{Fe}$ II: $\text{Fe}^{2+} + \text{Mg} \rightarrow \text{Mg}^{2+} + \text{Fe}$
Show answer

Answer (a)

Official answer key
$\mathrm{Ag^+/Ag}$

Answer (b)

Official answer key
Reaction II is spontaneous as $E^\circ_{cell}$ = positive.
Q522 marks · ArrangeOpen: From the organic compounds given below: I. Acetophenone II. Benzaldehyde III…

Answer the following.

From the organic compounds given below: I. Acetophenone II. Benzaldehyde III. Benzophenone
(a)[1]
Arrange the compounds in the decreasing order of reactivity towards addition of HCN.
(b)[1]
Give a chemical reaction when compound I is treated with compound II in the presence of a dilute alkali.
Show answer

Answer (a)

Official answer key

Order, first to last: Benzaldehyde, Acetophenone, Benzophenone

II > I > III

Answer (b)

Official answer key

Equation: $\mathrm{C_{6}H_{5}CHO} + \mathrm{C_{6}H_{5}COCH_{3}} \xrightarrow{\text{dil.}\text{ }\text{OH-}} \mathrm{C_{6}H_{5}CH(OH)CH_{2}COC_{6}H_{5}}$

Reaction: Crossed aldol (Claisen-Schmidt) condensation

Product: 3-hydroxy-1,3-diphenylpropan-1-one

Crossed aldol (Claisen-Schmidt) condensation: benzaldehyde and acetophenone with dilute alkali give $\mathrm{C_6H_5CH(OH)CH_2COC_6H_5}$ (3-hydroxy-1,3-diphenylpropan-1-one).
Q53(a)1 mark · ConversionOpen: Butan-2-one from propanoic acid.

How will you bring about the following conversion?

Butan-2-one from propanoic acid.
Show answer

Answer

Equations: $\mathrm{CH_{3}CH_{2}COOH} + \mathrm{PCl_{5}} \longrightarrow \mathrm{CH_{3}CH_{2}COCl} + \mathrm{POCl_{3}} + \mathrm{HCl}$ $2\mathrm{CH_{3}CH_{2}COCl} + \mathrm{(CH_{3})_{2}Cd} \longrightarrow 2\mathrm{CH_{3}CH_{2}COCH_{3}} + \mathrm{CdCl_{2}}$

Propanoic acid is converted to propanoyl chloride with $\mathrm{PCl_5}$, which reacts with dimethylcadmium to give butan-2-one (ethyl methyl ketone).
Q53(b)1 mark · ConversionOpen: m-chlorotoluene from benzaldehyde.

How will you bring about the following conversion?

m-chlorotoluene from benzaldehyde.
Show answer

Answer

Official answer key

Equations: $\mathrm{C_{6}H_{5}CHO} + \mathrm{Cl_{2}} \xrightarrow{\mathrm{FeCl_{3}}} \mathrm{m-ClC_{6}H_{4}CHO} + \mathrm{HCl}$ $\mathrm{m-ClC_{6}H_{4}CHO} \xrightarrow{\text{Zn-Hg}\text{/}\text{conc.}\text{ }\text{HCl}\text{,}\text{ }4\mathrm{[H]}} \mathrm{m-ClC_{6}H_{4}CH_{3}}$

Benzaldehyde $\xrightarrow{\mathrm{Cl_2/FeCl_3}}$ m-chlorobenzaldehyde $\xrightarrow{\mathrm{Zn\text{-}Hg/conc.\ HCl},\ 4[H]}$ m-chlorotoluene
Q54(a)1 mark · Short answerOpen: d-block elements exhibit larger number of oxidation state than f-block elements.

Give reasons for the following.

d-block elements exhibit larger number of oxidation state than f-block elements.
Show answer

Answer

Official answer key
d-block elements exhibit more oxidation states as the energy gap is comparable and not much, while in f-block elements the energy gap between f and d subshell is comparatively higher.
Q54(b)1 mark · Short answerOpen: Increase in atomic number does not change atomic radii among the transition…

Give reasons for the following.

Increase in atomic number does not change atomic radii among the transition elements.
Show answer

Answer

Official answer key
With increase in atomic number in transition series, the nuclear charge increases which tends to decrease the size but addition of electron in d-subshell increases the screening effect. Therefore, the increased nuclear charge is partly balanced and hence, the atomic radii does not change much.
Q552 marks · Short answerOpen: Halides of transition elements in higher oxidation states are more covalent…

Give reasons for the following.

Halides of transition elements in higher oxidation states are more covalent. Give reason.
Show answer

Answer

Official answer key
This is because in higher oxidation states the size of the metal ion decreases/more vacant d-orbitals are available for bonding. Electronegativity difference between the transition metal and the halogen tends to decrease. This results in more equal sharing of electrons between the metal and the halogen.
Q56(a)1 mark · ReactionOpen: Potassium permanganate on reaction with potassium iodide in acidic medium…

Write the chemical equation for the following.

Potassium permanganate on reaction with potassium iodide in acidic medium releases iodine gas, water and the sulphates of potassium and manganese. Give the balanced equation for the reaction.
Show answer

Answer

Equation: $2\mathrm{KMnO_{4}} + 8\mathrm{H_{2}SO_{4}} + 10\mathrm{KI} \longrightarrow 6\mathrm{K_{2}SO_{4}} + 2\mathrm{MnSO_{4}} + 8\mathrm{H_{2}O} + 5\mathrm{I_{2}}$

Potassium permanganate oxidises iodide to iodine in dilute sulphuric acid; $\mathrm{MnO_4^-}$ is reduced to $\mathrm{Mn^{2+}}$ (5 electrons) and each $\mathrm{I^-}$ gives one electron.
Q56(b)1 mark · ReactionOpen: Potassium permanganate on reaction with oxalic acid in acidic medium gives…

Write the chemical equation for the following.

Potassium permanganate on reaction with oxalic acid in acidic medium gives salts of Potassium and Manganese along with water molecules and carbon dioxide gas. Give the complete and balanced equation.
Show answer

Answer

Official answer key

Equation: $2\mathrm{KMnO_{4}} + 3\mathrm{H_{2}SO_{4}} + 5\mathrm{(COOH)_{2}} \longrightarrow \mathrm{K_{2}SO_{4}} + 2\mathrm{MnSO_{4}} + 8\mathrm{H_{2}O} + 10\mathrm{CO_{2}}$

$\mathrm{2KMnO_4+3H_2SO_4+5(COOH)_2\rightarrow K_2SO_4+2MnSO_4+8H_2O+10CO_2}$
Q57(a)1 mark · Short answerOpen: What is meant by hydroboration –oxidation reaction? Explain with an equation to…

Answer the following.

What is meant by hydroboration –oxidation reaction? Explain with an equation to show the final product formed during the reaction.
Show answer

Answer

Official answer key
It is indirect hydration of an alkene using diborane to form alcohol. $\mathrm{CH_3-CH=CH_2 \xrightarrow[H_2O_2/OH^-]{B_2H_6} CH_3CH_2-CH_2OH}$
Q57(b)1 mark · ArrangeOpen: Arrange the following in the increasing order of their acidic strength. Justify…

Answer the following.

Arrange the following in the increasing order of their acidic strength. Justify the order: Phenol, 4-methyl phenol, 3-nitrophenol.
Show answer

Answer

Official answer key

Order, first to last: 4-methyl phenol, Phenol, 3-nitrophenol

4-methyl phenol < phenol < 3-nitrophenol. Reason: +I group ($-\mathrm{CH_3}$) in phenols decreases its acidity while -I groups ($-\mathrm{NO_2}$) increases it.
Q582 marks · ConversionOpen: Using only the reagents KOH (alc. and aq), Cl₂, HBr, acidified K₂Cr₂O₇, NaOH…

How will you bring about the following conversion?

Using only the reagents KOH (alc. and aq), $\text{Cl}_2$, HBr, acidified $\text{K}_2\text{Cr}_2\text{O}_7$, NaOH and soda lime, carry out the following conversions:
(a)[1]
Propanoic acid to Ethanol.
(b)[1]
Chloropropane to propan-2-ol.
Show answer

Answer (a)

Official answer key
$\mathrm{CH_3CH_2COOH \xrightarrow{NaOH} CH_3CH_2COONa \xrightarrow{Soda\ lime} C_2H_6 \xrightarrow{Cl_2} CH_3CH_2Cl \xrightarrow{aq.\ KOH} CH_3CH_2OH}$

Answer (b)

Official answer key
$\mathrm{CH_3CH_2CH_2Cl \xrightarrow{alc.\ KOH} CH_3CH=CH_2 \xrightarrow{HBr} CH_3CH(Br)CH_3 \xrightarrow{aq.\ KOH} CH_3CH(OH)CH_3}$
Q59(a)1 mark · Short answerOpen: What is the significance of Van’t Hoff factor?

Answer the following.

What is the significance of Van’t Hoff factor?
Show answer

Answer

Official answer key
Van't Hoff factor is useful in determination of correct molecular masses of the compounds undergoing association and dissociation.
Q602 marks · Short answerOpen: Observe the following diagram and answer the questions that follows: In which…

Answer the following.

Observe the following diagram and answer the questions that follows:
Figure for this question
(a)[1]
In which direction, the flow of solvent will take place.
(b)[1]
Infer on which compartment pressure should be applied to stop the flow of solvent? What is that pressure called?
Show answer

Answer (a)

Official answer key
From compartment B to A. NaCl dissociates in aqueous solution, has a greater number of ions, shows higher osmotic pressure.

Answer (b)

Official answer key
Compartment A. Osmotic pressure
Q612 marks · NumericalOpen: 2.517 g of Naphthalene is dissolved in 150 g CS₂, the solution boils at 319.70…

Solve the following.

2.517 g of Naphthalene is dissolved in 150 g $\text{CS}_2$, the solution boils at 319.70 K. The boiling point of $\text{CS}_2$ is 319.4 K. Calculate the molecular mass of naphthalene. $K_b$ for $\text{CS}_2$ is $2.34\text{ K kg mol}^{-1}$.
Show answer

Answer

Official answer key

Formula used: Elevation of boiling point: dTb = i*Kb*m with Kb = 2.34 K kg mol^-1, w1 = 150 g, w2 = 2.517 g, dTb = 0.3 K, so M2 = 130.8 g mol^-1

$\Delta T_b = K_b \cdot m$ $\Delta T_b = K_b \times \frac{w \times 1000}{W \times M}$ $0.3 = 2.34 \times \frac{2.517 \times 1000}{150 \times M}$ $M = 130.8$

Final answer: 130.8 g mol^-1

Q622 marks · Short answerOpen: Given below are the two types of mechanism of the reaction: Why is the product…

Answer the following.

Given below are the two types of mechanism of the reaction:
Figure for this question
(a)[1]
Why is the product obtained in (A) pathway optically inactive?
(b)[1]
Investigate the effect of plane polarised light on the product of (B) pathway? Which pathway shows faster reaction?
Show answer

Answer (a)

Official answer key
Pathway A follows $S_N1$ mechanism in which attack of nucleophile on carbocation takes place from front and back side, gives racemic mixture which is optically inactive.

Answer (b)

Official answer key
The product obtained in pathway B rotates the plane polarised light in opposite direction than that of substrate. Pathway A is faster than pathway B.
Q633 marks · Short answerOpen: This box gives a list of aldehydes and ketones: CH₂O, C₂H₄O, C₃H₆O, C₃H₈O…

Answer the following.

This box gives a list of aldehydes and ketones: $\text{CH}_2\text{O}$, $\text{C}_2\text{H}_4\text{O}$, $\text{C}_3\text{H}_6\text{O}$, $\text{C}_3\text{H}_8\text{O}$, $\text{C}_2\text{H}_3\text{O}$, $\text{CHO}$. Choose the appropriate aldehyde/ ketone that reacts with $\text{CH}_3\text{MgBr}$ to form a $1^\circ$ alcohol, $2^\circ$ alcohol and a $3^\circ$ alcohol.
Show answer

Answer

Official answer key
(a) $1^\circ$ alcohol: $\mathrm{CH_2O}$ (formaldehyde) + $\mathrm{CH_3MgBr}$ then $\mathrm{H_2O}$ gives ethyl alcohol. (b) $2^\circ$ alcohol: $\mathrm{C_2H_4O}$ (acetaldehyde) + $\mathrm{CH_3MgBr}$ then $\mathrm{H_2O}$ gives iso-propyl alcohol. (c) $3^\circ$ alcohol: $\mathrm{C_3H_6O}$ (acetone) + $\mathrm{CH_3MgBr}$ then $\mathrm{H_2O}$ gives tert-butyl alcohol.
Q64(c)1 mark · Short answerOpen: The C-O bonds in ethers are polar.

Give reasons for the following.

The C-O bonds in ethers are polar.
Show answer

Answer

Official answer key
Due to the electronegativity of oxygen.
Q65(a)1 mark · True/falseOpen: The observed order of basic strength of amines is: NH₃ > (C₂H₅)₂NH > (C₂H₅)₃N.

Mention True or False and correct the wrong statements.

The observed order of basic strength of amines is: $\text{NH}_3 > (\text{C}_2\text{H}_5)_2\text{NH} > (\text{C}_2\text{H}_5)_3\text{N}$.
Show answer

Answer

Official answer key

False

Corrected: $(\mathrm{C_2H_5})_3\mathrm{N} > (\mathrm{C_2H_5})_2\mathrm{NH} > \mathrm{NH_3}$

False: $(\mathrm{C_2H_5})_3\mathrm{N} > (\mathrm{C_2H_5})_2\mathrm{NH} > \mathrm{NH_3}$
Q65(b)1 mark · True/falseOpen: +I effect is maximum in 1° amine than 3° amine.

Mention True or False and correct the wrong statements.

+I effect is maximum in $1^\circ$ amine than $3^\circ$ amine.
Show answer

Answer

Official answer key

False

Corrected: +I effect is maximum for $3^\circ$ amine than $1^\circ$ amine.

False: +I effect is maximum for $3^\circ$ amine than $1^\circ$ amine.
Q663 marks · CompleteOpen: Certain reagents are given in the form of clues: 'dehydrating agent, alkali…

Identify the clues and complete the equation.

Certain reagents are given in the form of clues: 'dehydrating agent, alkali dissolved in alcohol, Primary amine, anaesthesia, poisonous gas, salt, universal solvent'. Identify the clues and complete the equation: $-\text{NH}_2 + \underline{\hspace{2em}} + \underline{\hspace{2em}} \rightarrow \underline{\hspace{2em}} + \underline{\hspace{2em}} + \underline{\hspace{2em}}$
Show answer

Answer

Official answer key
$\mathrm{R{-}NH_2 + CHCl_3 + 3KOH_{(alc)} \rightarrow RNC + 3KCl + 3H_2O}$
Q67(a)1.5 marks · NumericalOpen: A patient was given a certain amount of iodine-131 as a part of a diagnostic…

Answer the following.

A patient was given a certain amount of iodine-131 as a part of a diagnostic procedure for thyroid disorder. Given that the half-life of radioactive $^{131}\text{I}$ is 8 days, what fraction of the initial $^{131}\text{I}$ would be present in a patient after 32 days if none of it were eliminated through natural body processes?
Figure for this question
Show answer

Answer

Official answer key
No. of half-lives = 32/8 = 4 Amount left after 4 half-lives = $[A_0]/2^4 = \frac{1}{16}[A_0]$

Final answer: $\frac{1}{16}$

Q67(b)1.5 marks · Short answerOpen: The potential energy diagram, for a multistep reaction is given below: (i)…

Answer the following.

The potential energy diagram, for a multistep reaction is given below: (i) Which step will be the rate determining step of the reaction? (ii) Which step is faster $\text{A} \rightarrow \text{B}$ or $\text{B} \rightarrow \text{C}$?
Figure for this question
Show answer

Answer

Official answer key
(i) Step 2 (ii) A to B is faster.
Q68(a)1.5 marks · Short answerOpen: Aman and Rohan were working on the kinetics involved in decomposition of…

Answer the following.

Aman and Rohan were working on the kinetics involved in decomposition of hydrogen peroxide in the presence of iodide ions. $\text{H}_2\text{O}_2(l) \rightarrow \text{H}_2\text{O} + \frac{1}{2}\text{O}_2(g)$ They both had their respective hypothesis as follows: According to Aman the rate will be affected by changing the concentrations of hydrogen peroxide and iodide ions as iodide ions are involved in the reaction. According to Rohan the rate will only be affected by changing the concentration of hydrogen peroxide. They carried out several experiments to check their respective hypothesis. Their results are shown graphically below: (i) What do you think whose hypothesis is correct and why? (ii) Do you think that the half -life of this reaction will change if concentration of hydrogen peroxide is reduced to half. Give a reason.
Figure for this question
Show answer

Answer

Official answer key
(i) Rohan's hypothesis is correct as the rate does not change with the concentration of iodide ions. (ii) No, the half-life will not change as it is a first order reaction, and its half-life is independent of its initial concentration.
Q68(b)1.5 marks · Short answerOpen: In a chemical reaction, two reactants take part. The rate of reaction is…

Answer the following.

In a chemical reaction, two reactants take part. The rate of reaction is directly proportional to the concentration of one of them and inversely proportional to the concentration of other. What will be the unit of its rate constant if the concentration terms are in mol/L?
Figure for this question
Show answer

Answer

Official answer key
It's a zero-order reaction. Unit: $\mathrm{mol\ L^{-1}\ s^{-1}}$
Q69(a)1.5 marks · Short answerOpen: Observe the structures of protein given below and answer the questions that…

Answer the following.

Observe the structures of protein given below and answer the questions that follows: (i) Which type of structures do A and B represent? (ii) How can these structures be converted to primary structure?
Figure for this question
Show answer

Answer

Official answer key
(i) A = Secondary structure; B = Quaternary structure (ii) Either by changing pH or temperature.
Q69(b)1.5 marks · ReactionOpen: Write a balanced chemical reaction of D-glucose with excess of phenyl hydrazine.

Answer the following.

Write a balanced chemical reaction of D-glucose with excess of phenyl hydrazine.
Figure for this question
Show answer

Answer

Equation: $\mathrm{C_{6}H_{12}O_{6}} + 3\mathrm{C_{6}H_{5}NHNH_{2}} \longrightarrow \mathrm{C_{18}H_{22}N_{4}O_{4}} + \mathrm{C_{6}H_{5}NH_{2}} + \mathrm{NH_{3}} + 2\mathrm{H_{2}O}$

Reaction: Osazone formation

Product: glucosazone

D-glucose reacts with three molecules of phenylhydrazine: the first forms the phenylhydrazone, the second oxidises the neighbouring $-\mathrm{CHOH}$ group (itself reduced to aniline and ammonia), and the third condenses to give glucosazone.
Q70(a)1.5 marks · Short answerOpen: Two students took the solution of same amino acid at different pH and applied…

Answer the following.

Two students took the solution of same amino acid at different pH and applied potential difference to their solutions respectively. (i) What do you think which student will observe a potential difference zero and why? (ii) What would you do in order to get a positive observation?
Figure for this question
Show answer

Answer

Official answer key
(i) Student B will observe zero potential difference as it forms zwitter ion and it does not migrate under the influence of applied electric field. (ii) Will change the pH of the solution.
Q70(b)1.5 marks · Short answerOpen: The graph given below shows the rate of enzyme-catalysed reaction with…

Answer the following.

The graph given below shows the rate of enzyme-catalysed reaction with temperature: (i) Why does the rate of reaction decrease at high temperature?
Figure for this question
Show answer

Answer

Official answer key
(i) As enzymes are globular proteins and at high temperature denaturation takes place.
Q713 marks · Short answerOpen: The molecular shape of [Ni(CO)₄] is tetrahedral while that of [Ni(CN)₄]²⁻ is…

Answer the following.

The molecular shape of $[\text{Ni}(\text{CO})_4]$ is tetrahedral while that of $[\text{Ni}(\text{CN})_4]^{2-}$ is square planar.
(a)[1.5]
Justify the shape of the two compounds.
(b)[1.5]
Find the oxidation state of Ni in each complex.
Show answer

Answer (a)

Official answer key
Oxidation state of Ni is zero in $[\mathrm{Ni(CO)_4}]$. CO is a stronger field ligand, and it can pair the unpaired electrons. The 3d orbital is now totally filled, while the 4s and 4p orbitals remain open. Therefore, exhibits $sp^3$ hybridization and tetrahedral geometry. The oxidation state of Ni in $[\mathrm{Ni(CN)_4}]^{2-}$ is +2. While in presence of $\mathrm{CN^-}$ being a stronger field ligand all the electrons are paired up. The empty 3d, 4s and two 4p orbitals undergo $dsp^2$ hybridization to make bonds with $\mathrm{CN^-}$ ligands in square planar geometry.

Answer (b)

Official answer key
Ni has 0 oxidation state in complex $[\mathrm{Ni(CO)_4}]$ and +2 oxidation state in $[\mathrm{Ni(CN)_4}]^{2-}$
Q723 marks · NumericalOpen: Nandini wants to electroplate her bracelet with silver. She gives the bracelet…

Solve the following.

Nandini wants to electroplate her bracelet with silver. She gives the bracelet to an artist.
(a)[1.5]
After electroplating she gets the information that 1.6117g of the metal is deposited when electric current of 0.2 ampere is passed for 2 hours. How will she make the confirmation that the metal deposited is silver by using the data?
(b)[1.5]
Which law is applicable to solve the problem?
Show answer

Answer (a)

Official answer key
$w = ZIt$ $1.6117=\frac{\text{At. mass}}{\text{Valency}\times 96500}\times 0.2\times 3600\times 2$ $1.6117=\frac{\text{At. mass}}{1\times 96500}\times 0.2\times 3600\times 2$ Atomic mass = 108 g The deposited metal is silver.

Final answer: 108 g

Answer (b)

Official answer key
Faraday's first law of electrolysis.
Q733 marks · Short answerOpen: 3-bromo 3-methylhexane reacts with aq. KOH to give racemic mixture of products…

Answer the following.

3-bromo 3-methylhexane reacts with aq. KOH to give racemic mixture of products.
(a)[1]
Identify the type of reaction mechanism.
(b)[1]
Draw the structure of the transition state intermediate.
(c)[1]
If Bromine is replaced by fluorine, will the reaction proceed faster or slowly? Give reason.
Show answer

Answer (a)

Official answer key
$S_N1$

Answer (b)

Official answer key

3-methylhexan-3-yl cation:

The transition state/intermediate is the tertiary carbocation: a planar $\mathrm{C^+}$ bonded to $\mathrm{CH_3}$, $\mathrm{CH_3CH_2}$ and $\mathrm{CH_2CH_2CH_3}$.
Carbocation with positively charged carbon attached to CH3, CH3CH2 and CH2CH2CH3.

Answer (c)

Official answer key
The reaction will become slow due to higher bond dissociation energy of C-F bond.
Q74(a)1.5 marks · Short answerOpen: Which will react faster by S_N2 mechanism with –OH, and why: CH₃Br or CH₃I?

Answer the following.

Which will react faster by $S_N2$ mechanism with –OH, and why: $\text{CH}_3\text{Br}$ or $\text{CH}_3\text{I}$?
Show answer

Answer

Official answer key
$\mathrm{CH_3I}$ will react faster because $\mathrm{I^-}$ is a better leaving group. It has lower bond dissociation energy. Halides show following order of reactivity: R-F < R-Cl < R-Br < R-I
Q74(b)1.5 marks · Short answerOpen: Which will react faster by S_N2 mechanism with –OH, and why: (CH₃)₃CCl or CH₃Cl?

Answer the following.

Which will react faster by $S_N2$ mechanism with –OH, and why: $(\text{CH}_3)_3\text{CCl}$ or $\text{CH}_3\text{Cl}$?
Show answer

Answer

Official answer key
$\mathrm{CH_3Cl}$, lacks bulky substituents on the carbon atom that bears the leaving group. As a result, in the $S_N2$ reaction with $\mathrm{OH^-}$, $\mathrm{CH_3Cl}$ has a faster reactivity than $(\mathrm{CH_3})_3\mathrm{CCl}$.
Q753 marks · NumericalOpen: 50 mg of Na₂SO₄ is dissolved in 3 litres of water at 27°C. What would be the…

Solve the following.

50 mg of $\text{Na}_2\text{SO}_4$ is dissolved in 3 litres of water at $27^\circ\text{C}$. What would be the osmotic pressure for the solution?
Show answer

Answer

$\mathrm{Na_2SO_4}$ dissociates completely into 3 ions, so $i = 3$. Molar mass $= 142\text{ g mol}^{-1}$; moles $= \frac{0.050}{142} = 3.52 \times 10^{-4}$; volume $= 3\text{ L}$; $T = 300\text{ K}$. $\pi = \frac{i\,n\,R\,T}{V} = \frac{3 \times 3.52\times10^{-4} \times 0.0821 \times 300}{3} = 8.67 \times 10^{-3}\text{ atm}$. (The printed key's $1.23$ atm does not follow from its own working: 50 mg is $0.050$ g.)

Final answer: 8.67e-3 atm

Q763 marks · NumericalOpen: During a study trip, students visited a lake and took out water sample which…

Solve the following.

During a study trip, students visited a lake and took out water sample which was rich in potassium chloride salt. They performed an experiment to calculate the boiling point of lake water which was found to be $100.025^\circ\text{C}$. If 500 g of the water sample was used for calculation ($K_b = 0.52\text{ K kg mol}^{-1}$) and there was 0.42 g KCl in the 500 ml sample, what is the observed molecular mass of KCl in the lake sample?
Show answer

Answer

The observed (experimental) molar mass comes straight from the boiling point elevation, with no van't Hoff factor: $\Delta T_b = 100.025 - 100 = 0.025\text{ K}$ $M_{obs} = \frac{1000 \times K_b \times w}{W \times \Delta T_b} = \frac{1000 \times 0.52 \times 0.42}{500 \times 0.025} = 17.47\text{ g mol}^{-1}$ (The calculated molar mass of KCl is 74.5 g mol$^{-1}$; the van't Hoff factor is $i = \frac{74.5}{17.47} \approx 4.3$.)

Final answer: 17.47 g mol^-1

Q773 marks · NumericalOpen: A student X was doing an experiment by taking 0.15 g acetic acid in 40 g of…

Solve the following.

A student X was doing an experiment by taking 0.15 g acetic acid in 40 g of benzene. He suddenly observed that the freezing point of the mixture is lowered by $0.40^\circ\text{C}$. Do you think that association of acetic acid has taken place? If yes, what will be degree of association ($K_f$ of benzene = $5.12\text{ K kg mol}^{-1}$)?
Show answer

Answer

$M_{obs} = \frac{1000 \times K_f \times w}{W \times \Delta T_f} = \frac{1000 \times 5.12 \times 0.15}{40 \times 0.40} = 48\text{ g mol}^{-1}$. The normal molar mass of acetic acid is 60 g mol$^{-1}$. Association (dimerisation) would make the observed mass larger than 60, but 48 is smaller, so with the data as printed association has not taken place ($i = \frac{60}{48} = 1.25 > 1$ points to dissociation, not association). (The printed key's 96 g mol$^{-1}$ and 0.75 need $\Delta T_f = 0.20\text{ K}$: then $M_{obs} = 96$, $i = 0.625$, and the degree of association of the dimer is $\alpha = 2(1 - i) = 0.75$.)

Final answer: $M_{obs} = 48\text{ g mol}^{-1} < 60$: no association

Q783 marks · Short answerOpen: Starting with acetic acid, discuss the role of one F and one Cl groups play on…

Answer the following.

Starting with acetic acid, discuss the role of one F and one Cl groups play on the acidity of the acid when they replace a hydrogen atom of $\text{CH}_3$ group of acetic acid. Answer by arranging the acids in increasing acid strength followed by explanation.
Show answer

Answer

Official answer key
$\mathrm{CH_3COOH} < \mathrm{ClCH_2COOH} < \mathrm{FCH_2COOH}$ Discussion: due to +I of $\mathrm{CH_3}$ group the -OH bond is strong hence weak acid. Due to -I effect of both F and Cl groups (F has more -I effect) the bond between O-H of carboxylic acid becomes weaker. Hence, release of $\mathrm{H^+}$ is easier.
Q793 marks · Short answerOpen: A scientist while working in the lab accidently removed the labels from the…

Answer the following.

A scientist while working in the lab accidently removed the labels from the carboxylic acid bottles and phenol. He had three bottles in which he had kept formic acid, acetic acid and phenol. Can you suggest a chemical test which he can perform to positively identify the acids so that he can label the bottles correctly?
Show answer

Answer

Official answer key
Treat small amount of compound from all bottles with the Tollen's reagent and warm. The one which gives silver mirror is formic acid. Treat small amount of the other two compounds with neutral ferric chloride solution, the acid which gives wine red colouration is acetic acid. The one which gives violet/purple solution is phenol.
Q803 marks · Case basedOpen: Geet has set-up the following galvanic cell by taking the electrolyte solution…

Read the case and answer the questions.

Geet has set-up the following galvanic cell by taking the electrolyte solution of $\text{Pb}(\text{NO}_3)_2$ and $\text{CrCl}_3$. $E^\circ = -0.13\text{ V}$ $E^\circ = -0.74\text{ V}$
Figure for this question
(a)[1]
How will you design the feasible cell by taking appropriate salt solution in place of solution A and B?
(b)[1]
What is the applicability of the above cell?
(c)[1]
Consider, salt bridge is filled with Potassium Chloride (KCl) solution. How does salt bridge maintain electrical neutrality?
Show answer

Answer (a)

Official answer key
Solution A: $\mathrm{CrCl_3}$ Solution B: $\mathrm{Pb(NO_3)_2}$

Answer (b)

Official answer key
To convert chemical energy into electrical energy by redox reaction.

Answer (c)

Official answer key
In anodic half-cell, concentration of $\mathrm{Cr^{3+}}$ increases, hence, $\mathrm{Cl^-}$ ions are migrated from salt bridge to maintain electrical neutrality. In cathodic half-cell, the concentration of $\mathrm{Pb^{2+}}$ decreases, hence, $\mathrm{K^+}$ ions are migrated from salt bridge to maintain electrical neutrality.
Q81(b)1 mark · Short answerOpen: To know the value of molar conductivity at infinite dilution for weak…

Answer the following.

To know the value of molar conductivity at infinite dilution for weak electrolyte, Kohlrausch’s law is effective. Explain.
Show answer

Answer

Official answer key
Each ion makes a definite contribution to the molar conductivity of an electrolyte at infinite dilution irrespective of the nature of the other ion present in the electrolyte.
Q81(c)1 mark · DrawingOpen: Draw the graph to show the variation of molar conductivity of a weak…

Answer the following.

Draw the graph to show the variation of molar conductivity of a weak electrolyte with concentration.
Show answer

Answer

Official answer key
Graph of molar conductivity ($\Lambda_m$) against $\sqrt{C}$ for a weak electrolyte ($\mathrm{CH_3COOH}$): a steeply falling curve that rises very sharply at very low concentration and flattens at higher concentration; it cannot be extrapolated to $\Lambda_m^\circ$.
Axes: $\Lambda_m$ (y) against $\sqrt{C}$ (x). Curve for weak electrolyte (CH3COOH): very steep rise at low concentration, falling and flattening to a nearly horizontal tail at higher concentration; dotted extension at the top showing it cannot be extrapolated.
Q823 marks · Case basedOpen: Observe the following graph for ionisation enthalpies of first, second and…

Read the case and answer the questions.

Observe the following graph for ionisation enthalpies of first, second and third transition series.
Figure for this question
(a)[1]
Why does the ionisation energy increase across a transition series?
(b)[1]
The ionisation energies are nearly equal for first and second transition series but abruptly increases for third transition series. Explain.
(c)[1]
Which element would have higher density, technetium or rhenium? Justify your answer.
Show answer

Answer (a)

Official answer key
Ionisation energy increases with increase in nuclear charge which increase with increase in atomic number. The added electron shields the added proton. The effect of increased nuclear charge is more than the shielding effect.

Answer (b)

Official answer key
In the third transition series, after lanthanum, lanthanoids have electrons entered in 4f orbital, which shows poor shielding effect, hence atomic size decreases due to lanthanoid contraction, ionisation energy increases abruptly for decreased atomic size.

Answer (c)

Official answer key
Rhenium has higher density due to decreased atomic size and increase in nuclear charge. Hence, the atomic volume decreases and electron density increases.
Q833 marks · Case basedOpen: Vitamins are required in very small amount for the healthy growth of organisms…

Read the case and answer the questions.

Vitamins are required in very small amount for the healthy growth of organisms. When a person does not get a particular vitamin in diet, she/he may suffer from certain diseases. Normal functioning of an organism can be greatly affected due to deficiency of vitamins in the body.
(a)[1]
Which vitamin deficiency causes rickets and scurvy?
(b)[1]
Do you think, all vitamins are soluble in water? Explain by giving an example.
(c)[1]
Explain avitaminosis.
Show answer

Answer (a)

Official answer key
Rickets - Vit D Scurvy - Vit C

Answer (b)

Official answer key
No, all vitamins are not water soluble. E.g. vitamin C is water soluble, but vitamin A is not soluble in water.

Answer (c)

Official answer key
Multiple deficiencies caused by lack of more than one vitamin is known as avitaminosis.
Q843 marks · Case basedOpen: The concept of Osmosis is frequently used in medical field. On the other hand…

Read the case and answer the questions.

The concept of Osmosis is frequently used in medical field. On the other hand, reverse osmosis has also found application in desalination process. Both these processes play a very useful role in the growth and development of humankind.
(a)[1]
Explain where in medical field the concept of osmosis is used.
(b)[1]
The place close to the sea can use reverse osmosis (RO) for desalination. Explain how that can be done.
(c)[1]
A saturated salt solution makes a boiled peeled egg shrink. Why?
Show answer

Answer (a)

Official answer key
In dialysis of kidneys the concept of osmosis is used.

Answer (b)

Official answer key
The sea water contains different concentrations of many salts when they are separated from pure water through semipermeable membrane, the reverse osmosis (RO) takes place and water moves out from the sea water to pure water side.

Answer (c)

Official answer key
As the salt concentration is less in egg than the saltwater solution, the water from egg moves towards saltwater solution and makes egg shrink.
Q853 marks · Case basedOpen: Chloroform was synthesised in the year 1847. It was mainly used in the medicine…

Read the case and answer the questions.

Chloroform was synthesised in the year 1847. It was mainly used in the medicine industry. When exposed to sunlight it forms a poisonous gas called phosgene. To prevent this, a small quantity of a compound which has a molecular formula $\text{C}_2\text{H}_6\text{O}$ is added.
(a)[1]
What is the chemical formula of phosgene?
(b)[1]
Which chemical is added to prevent the formation of phosgene.
(c)[1]
Where is chloroform used in the field of medicine?
Show answer

Answer (a)

Official answer key
$\mathrm{COCl_2}$

Answer (b)

Official answer key
Ethanol

Answer (c)

Official answer key
Anaesthesia
Q863 marks · Case basedOpen: Ships, being exposed to saltwater and atmospheric conditions, are highly…

Read the case and answer the questions.

Ships, being exposed to saltwater and atmospheric conditions, are highly susceptible to rust and corrosion. This is one method used to prevent corrosion. Figure 1
Figure for this question
(a)[1]
Give name of the method employed?
(b)[1]
Name the cathode and anode in this process?
(c)[1]
How is cathode protected?
Show answer

Answer (a)

Official answer key
Electrical protection.

Answer (b)

Official answer key
Anode - Magnesium and Cathode - Iron

Answer (c)

Official answer key
Anode oxidises and electrons are transferred. $\mathrm{NH^+}$ ions around the iron object and protects it from rusting.
Q873 marks · Case basedOpen: Sodium ferrocyanide is used as anti-caking agent in salts and salt substitute…

Read the case and answer the questions.

Sodium ferrocyanide is used as anti-caking agent in salts and salt substitute. Due to contact with atmospheric moisture, table salt undergoes clumping. Adding certain amount of sodium ferrocyanide can prevent this from occurring. Consider the coordination compounds $\text{Na}_4[\text{Fe}(\text{CN})_6]$ and $[\text{Fe}(\text{H}_2\text{O})_6]\text{Cl}_2$.
(a)[1]
Though cyanide is poisonous, potassium ferrocyanide is used as food additive. Explain.
(b)[1]
Which compound will be more stable $\text{Na}_4[\text{Fe}(\text{CN})_6]$ or $[\text{Fe}(\text{H}_2\text{O})_6]\text{Cl}_2$? Justify your answer.
(c)[1]
Write the hydrate isomer of $[\text{Fe}(\text{H}_2\text{O})_6]\text{Cl}_2$, which gives one mole of precipitate with $\text{AgNO}_3$ solution.
Show answer

Answer (a)

Official answer key
Cyanide in $\mathrm{Na_4[Fe(CN)_6]}$ is not ionisable in aqueous solution and hence does not show poisonous effect.

Answer (b)

Official answer key
$\mathrm{Na_4[Fe(CN)_6]}$ will be more stable as cyanide is strong ligand and stabilise the compound by pairing the electron in low energy $t_{2g}$ orbitals.

Answer (c)

Official answer key
$\mathrm{[Fe(H_2O)_5Cl]Cl.H_2O}$
Q883 marks · Case basedOpen: Food and drug administration (FDA) has approved that Ethylenediamine tetra…

Read the case and answer the questions.

Food and drug administration (FDA) has approved that Ethylenediamine tetra acetate (EDTA) is a medication in the treatment of lead poisoning. It is also used in the estimation of $\text{Ca}^{2+}$ and $\text{Mg}^{2+}$ during removal of hardness in water.
(a)[1]
Which type of a ligand is EDTA?
(b)[1]
Why EDTA is used in the treatment of lead poisoning?
(c)[1]
What is the geometry of EDTA complex?
Show answer

Answer (a)

Official answer key
Chelating ligand

Answer (b)

Official answer key
EDTA being chelating ligand forms more stable complex with heavy metal like lead.

Answer (c)

Official answer key
Octahedral
Q893 marks · Case basedOpen: Alcohol and phenols are hydroxy derivatives of hydrocarbons. Both have the…

Read the case and answer the questions.

Alcohol and phenols are hydroxy derivatives of hydrocarbons. Both have the tendency to form intermolecular hydrogen bonding. Thus, they have higher boiling point and high solubility in water. As the O-H bond is polar in nature they also exhibit acidic property. Acidic characteristic depends upon inductive effect and resonance stabilization. The position and nature of substituents also affects the acidic strength.
(a)[1]
Select from each pair as per the property mentioned in the bracket: (i) Ethanol, Methanol (most acidic) (ii) O-cresol and m-cresol (least acidic)
(b)[1]
Correct the given statement and give a reason for your answer: 'The solubility of phenol is higher than alcohol.'
(c)[1]
Compounds [X] and [Y] are functional isomers of each other with molecular formula $\text{C}_3\text{H}_8\text{O}$. (i) Draw the isomers. (ii) Which compound will have a lower boiling point and why?
Show answer

Answer (a)

Official answer key
(i) Methanol (ii) o-cresol

Answer (b)

Official answer key
The solubility of phenol is lower than alcohol. The phenyl group being more hydrophobic in nature, the tendency to form intermolecular hydrogen bonding decreases.

Answer (c)

Official answer key

propan-1-ol:

methoxyethane:

(i) X = $\mathrm{CH_3CH_2CH_2OH}$; Y = $\mathrm{CH_3CH_2OCH_3}$ (ii) Compound [Y] will have lower boiling point as it is an ether which cannot form associated molecules by intermolecular hydrogen bond.
Q903 marks · Case basedOpen: Transition metals exhibit different oxidation states in their different types…

Read the case and answer the questions.

Transition metals exhibit different oxidation states in their different types of compounds. Due to incompletely filled d-orbitals the transition metal shows variable oxidation states, magnetic property, and tendency to form complexes. The most stable oxidation state is the one that maximizes the charge without breaking the stable electronic configuration. The highest oxidation states of transition elements are observed in their fluorides and oxides.
(a)[1]
In which compound VO/ $\text{V}_2\text{O}_4$ vanadium has a stable oxidation state and why?
(b)[1]
Manganese achieves its highest oxidation state with fluorine. Correct the statement with a valid reason.
(c)[1]
Select the ion/s from the given ones that will show maximum and minimum response to the applied magnetic field: $\text{Zn}^{2+}, \text{Cu}^{2+}, \text{Mn}^{2+}$.
Show answer

Answer (a)

Official answer key
$\mathrm{V_2O_4}$, vanadium has +4 oxidation state, and it achieves inert gas configuration.

Answer (b)

Official answer key
Manganese can achieve its highest oxidation state with oxygen. Oxygen can form multiple bonds with manganese.

Answer (c)

Official answer key
Maximum: $\mathrm{Mn^{2+}}$; Minimum: $\mathrm{Zn^{2+}}$
Q913 marks · Case basedOpen: Nucleic acids are present in the nuclei of all living cells. DNA analysis is…

Read the case and answer the questions.

Nucleic acids are present in the nuclei of all living cells. DNA analysis is vital in crime scene situations. RNA is essential for most biological functions. In modern world the knowledge of RNA and DNA is vital for us.
(a)[1]
Which nitrogenous bases constitute RNA and DNA?
(b)[1]
Identify pyrimidine and purine from (a) part answer.
(c)[1]
What are the structural differences in RNA and DNA?
Show answer

Answer (a)

Official answer key
RNA - A, G, C, U DNA - A, G, C, T

Answer (b)

Official answer key
Purines - A and G Pyrimidine - T, C, U

Answer (c)

Official answer key
DNA - double stranded alpha-helix RNA - single stranded alpha helix
Q923 marks · Case basedOpen: Vapour pressure plays an important role in calculating boiling point and the…

Read the case and answer the questions.

Vapour pressure plays an important role in calculating boiling point and the freezing point of solutions. In cold countries salt is sprinkled on the road whereas while boiling egg, salt is added in water. Both these processes help the cause.
(a)[1]
Explain relative lowering of vapour pressure.
(b)[1]
How adding salt to water help in boiling of egg?
(c)[1]
Why is salt sprinkled on road during winters?
Show answer

Answer (a)

Official answer key
Pure solvent has a certain vapour pressure. When a non-volatile solute is added into pure solvent, less solvent evaporates and hence, vapour pressure decreases. The ratio between the Vapour Pressure (V.P) difference to V.P. of pure solvent is known as relative lowering of V.P.

Answer (b)

Official answer key
Addition of salt increases the boiling point of aqueous solution and eggs get more heat for cooking.

Answer (c)

Official answer key
It lowers the freezing point of ice.
Q935 marks · Case basedOpen: Water pollution caused by toxic elements is one of the most important…

Read the passage and answer the questions.

Water pollution caused by toxic elements is one of the most important environmental problems in the world. The objectives of this study were: the effects of chelating agents on heavy metals extraction from polluted water were carried out to examine Chelating agents like Ethylenediamine tetra acetate (EDTA), oxalic acid (OA) and citric acid (CA) were tested respectively. The effects of operating parameters, such as pH and extraction time were examined. Removal of metals was dependent on the concentration of extracting agent and raised with increasing concentration of chelating agents. Source: DOI : http://dx.doi.org/10.13005/ojc/330414
Figure for this question
(a)[1]
What are chelating agents?
(b)[1]
Name any two heavy metals which are considered toxic.
(c)[1]
From the above graph, arrange the order of chelating agents with respect to the % removal of toxic metals.
(d)[1]
Draw the structure of EDTA.
(e)[1]
What is the main factor on which the removal of metals depends on contaminated water using Chelating Agents?
Show answer

Answer (a)

Official answer key
Chelating agents are agents which bind with the metal and form complexes.

Answer (b)

Official answer key
Mercury/Copper/Lead

Answer (c)

Official answer key
OA>CA>EDTA

Answer (d)

Official answer key

EDTA:

Structure of EDTA: $\mathrm{(HOOCCH_2)_2N-CH_2-CH_2-N(CH_2COOH)_2}$

Answer (e)

Official answer key
Concentration of the extracting agents.
Q945 marks · Case basedOpen: Water phase change in soil causes severe damage to roads, canals, airport…

Read the passage and answer the questions.

Water phase change in soil causes severe damage to roads, canals, airport runways and other buildings. The freezing point is an important indicator to judge whether the soil is frozen or not. It is found that the addition of salt can effectively reduce the frost heave of soil. The graphs given below show the change in freezing point with different concentrations of salt and water: Source: https://www.mdpi.com/2073-4441/12/8/2232 It is clear from the graphs that as water content is high, depression is less and as the salt concentration is high, depression is more.
Figure for this question
(a)[2]
2.1g $\text{CoCl}_3\cdot 6\text{NH}_3$ (molecular weight = 267.5) was dissolved in 100 g of water. The freezing point of the solution was $-0.584^\circ\text{C}$. Assuming 100% ionization of the complex salt having coordination number 6, what will be the formula of the complex. Given that: $K_f$ for water = $1.86\text{ K kg mol}^{-1}$.
(b)[1.5]
Which salt solution is the best for de-icing? 1% NaCl or 1% $\text{CaCl}_2$ [Atomic weight of Na= 23, Ca = 40, Cl = 35.5 a.m.u]
(c)[1.5]
Equimolal concentration of two different solutes X and Y undergoes dimerization and trimerization respectively in their respective solutions. What will be the ratio of observed lowering of vapour pressure in two cases?
Show answer

Answer (a)

Official answer key
$\Delta T_f=\frac{i\times K_f\times w\times 1000}{M\times W}$ Van't Hoff factor $=\frac{0.584\times 267.5}{1.86\times 2.1\times 10}=3.99=4$ Formula $=[\mathrm{Co(NH_3)_6}]\mathrm{Cl_3}$

Final answer: 4

Answer (b)

Official answer key
1% NaCl is better for de-icing as its number of moles will be greater.

Answer (c)

Official answer key
$\frac{\Delta T_{f}X}{\Delta T_{f}Y}=\frac{3}{2}$

Final answer: 3/2

Q955 marks · Case basedOpen: The aldol condensation takes its name from aldol (3-hydroxybutanal) a name…

Read the passage and answer the questions.

The aldol condensation takes its name from aldol (3-hydroxybutanal) a name introduced by Wurtz who first prepared the beta-hydroxy aldehyde from acetaldehyde in 1872. It is a base catalysed reaction, and the product of aldol condensation undergoes dehydration of intermediate beta-aldols or beta-ketals in presence of a dilute acid to form $\alpha, \beta$ unsaturated carbonyl compound. Source: https://www.researchgate.net/publication/229950129_The_Aldol_Condensation
(a)[2]
Write the mechanism of aldol condensation starting with acetaldehyde.
(b)[1]
Name the base used highlighting the role of the base catalyst in facilitating the reaction.
(c)[2]
What is crossed aldol condensation? Name the product formed when benzaldehyde undergoes crossed aldol condensation with acetaldehyde.
Show answer

Answer (a)

Official answer key
Mechanism (base-catalysed): Step 1: $\mathrm{OH^-}$ removes an $\alpha$-hydrogen of $\mathrm{CH_3CHO}$: $\mathrm{CH_3CHO + OH^- \rightleftharpoons {}^-CH_2CHO + H_2O}$ (enolate ion). Step 2: The enolate attacks the carbonyl carbon of a second molecule of $\mathrm{CH_3CHO}$: $\mathrm{CH_3CHO + {}^-CH_2CHO \rightleftharpoons CH_3CH(O^-)CH_2CHO}$. Step 3: The alkoxide ion takes a proton from water: $\mathrm{CH_3CH(O^-)CH_2CHO + H_2O \rightleftharpoons CH_3CH(OH)CH_2CHO + OH^-}$ (aldol, 3-hydroxybutanal). Step 4: Dehydration through the $\alpha$-hydrogen: $\mathrm{CH_3CH(OH)CH_2CHO \rightleftharpoons CH_3CH=CHCHO + H_2O}$.

Answer (b)

Official answer key
Dil. NaOH/Ba(OH)$_2$ can be used as catalyst. $\mathrm{OH^-}$ from the dilute alkali attacks on the first molecule of aldehyde and removes the $\alpha$ hydrogen present in it to form an enolate ion which is resonance stabilised.

Answer (c)

Official answer key
When aldol condensation takes place between molecules of different aldehydes or different ketones or one aldehyde and one ketone. Cinnamaldehyde/ 3-phenylprop-2-enal.
Q965 marks · Case basedOpen: ‘In 1915, a senior lecturer in Biochemistry at the University of Manchester…

Read the passage and answer the questions.

‘In 1915, a senior lecturer in Biochemistry at the University of Manchester named Dr. Chaim Weizmann invented a fermented process that converts starch into acetone and butanol by using Clostridium acetobutylicum. Acetone was the key component in the production of the smokeless gunpowder (cordite) used by the Allies in World War I. Acetone was previously made from calcium acetate imported from Germany, since Allies were in war with Germany, this was no longer possible.’ Source: https://www.weizmann.ac.il/WeizmannCompass/sections/people-behind-the-science/chaim-weizmann%E2%80%99s-acetone-patent-turns-100
(a)[2]
How will you prepare acetone from calcium acetate?
(b)[2]
If butan-2-ol is oxidised by $\text{K}_2\text{Cr}_2\text{O}_7$, which ketone will be produced? Give the balanced chemical reaction.
(c)[1]
How would you obtain acetone from acetyl chloride?
Show answer

Answer (a)

Official answer key
By dry distillation of calcium acetate, we can obtain acetone $\mathrm{Ca(CH_3COO)_2 \xrightarrow{heat} CH_3COCH_3 + CaCO_3}$

Answer (b)

Official answer key
$\mathrm{CH_3CH(OH)CH_2CH_3 + [O] \rightarrow CH_3COCH_2CH_3 + H_2O}$

Answer (c)

Official answer key
$\mathrm{2CH_3COCl + (CH_3)_2Cd \rightarrow 2CH_3COCH_3 + CdCl_2}$
Q975 marks · Case basedOpen: ‘Freidrich Wilhelm Georg Kohlrausch was a German physicist who studied the…

Read the passage and answer the questions.

‘Freidrich Wilhelm Georg Kohlrausch was a German physicist who studied the electrical conductivity of electrolytic solutions. From 1875-1879 he performed numerous experiments with aqueous solutions of different salts, acids and other electrolytes. He concluded that each type of migrating ion has a specific conductivity, and it does not depend on the origin of the ion. In a simple way, his conclusions were applicable to strong electrolytes as well as more complex behaviour was observed for weak electrolytes.’ Source: https://doi.org/10.1002/elsa.202160008
(a)[1]
What did Kohlrausch mean when he said that each ion has specific conductivity which is independent of origin of ions?
(b)[2]
Explain the law proposed by Kohlrausch with example.
(c)[2]
How do you propose to calculate the molar conductivity of a weak electrolyte (acetic acid) by using his law?
Show answer

Answer (a)

Official answer key
$\mathrm{Na^+}$ ions have the same value of specific conductivity irrespective of their source being sodium sulphate or sodium nitrate.

Answer (b)

Official answer key
Correct explanation of the law with example. $\mathrm{CH_3COONa + HCl \rightarrow CH_3COOH + NaCl}$

Answer (c)

Official answer key
If molar conductivity at infinite dilution of HCl, NaCl and sodium acetate is known then molar conductivity of acetic acid at infinite dilution can be calculated using this law.

About this set of Competency Focused Questions (CFQ)

The ISC Chemistry 2025 Competency Focused Questions (CFQ) is a set of Competency Focused Questions (CFQ) for Class 12: 116 questions in printed order, asked from 21 chapters. Competency Focused Questions are practice questions published by CISCE to build application and analysis skills; they are not a full exam paper.

The layout of the current Chemistry paper (sections, marks, choices) is in the paper pattern guide.

By kind of question

KindQuestionsMarks printed*
Short answer3762
Case based1761
MCQ2323
Numerical717.5
Fill in1010
Assertion-reason55
Conversion34
Complete24
Reaction33.5
True/false33
Arrange23
Differentiate22
Coordination complex12
Drawing11

By chapter

ChapterQuestionsMarks printed*
Solutions1430
Electrochemistry1326
Coordination Compounds921
Chemical Kinetics1217
Haloalkanes and Haloarenes1017
Aldehydes and Ketones617
d-and f-Block Elements914
Aliphatic Amines811
Proteins89.5
Alcohols58
Carboxylic Acids37
Phenols44
Nucleic Acids24
Carbohydrates33.5
Aromatic aldehyde (Benzaldehyde)33
Vitamins13
Aliphatic Ethers22
Aniline11
Aryl ethers11
Cyanides and Isocyanides11
Diazonium salts11

* Marks are those printed on each question; where a question offers an either-or choice, both options are counted, so the totals can come to more than the paper’s own total.

Common questions

How many questions are in the ISC Chemistry 2025 Competency Focused Questions (CFQ)?

116 questions, shown in full and in printed order on this page.

Which chapters does the ISC Chemistry 2025 Competency Focused Questions (CFQ) ask most about?

By number of questions: Solutions (14), Electrochemistry (13), Chemical Kinetics (12) and Haloalkanes and Haloarenes (10).

Does this page have the answers to the ISC Chemistry 2025 Competency Focused Questions (CFQ)?

Tap “Show answer” under a question to see its answer. The download button saves the paper as a PDF, with or without the answers.