Prashnikaप्रश्निका
Code
About
PhysicsBoardClass 12

ISC Physics 2024 Question Paper with Answers

The ISC Physics 2024 Question Paper for Class 12: all 49 questions, 70 marks in all, in printed order and in full. It is free to download: tap "Show answer" under a question to see its answer, or use the download button to save the questions as a PDF, with or without answers; "Print this paper" below prints it as it was set.

49questions
70marks
15chapters
Q1(A)(i)1 mark · MCQOpen: If potential difference between the two ends of a metallic wire is doubled…

Choose the correct option.

If potential difference between the two ends of a metallic wire is doubled, drift speed of free electrons in the wire:
  • (a)remains same.
  • (b)becomes double.
  • (c)becomes four times.
  • (d)becomes half.
Show answer

Answer

Correct option: (b)

Answer: (b) becomes double. Drift speed $v_d = \frac{I}{neA} = \frac{V}{neAR}$, so $v_d \propto V$; doubling the p.d. doubles the drift speed.
Q1(A)(ii)1 mark · MCQOpen: A metre bridge is balanced with a known resistance (R) in the left hand gap and…

Choose the correct option.

A metre bridge is balanced with a known resistance (R) in the left hand gap and an unknown resistance (S) in the right hand gap. Balance point is found to be at a distance of $l\text{ cm}$ from the left hand side. When the battery and the galvanometer are interchanged, balance point will
  • (a)shift towards left.
  • (b)shift towards right.
  • (c)remain same.
  • (d)shift towards left or right depending on the values of R and S.
Show answer

Answer

Correct option: (c)

Answer: (c) remain same. The balance condition $\frac{R}{S}=\frac{l}{100-l}$ does not depend on the positions of the battery and galvanometer, so the balance point is unchanged.
Q1(A)(iii)1 mark · MCQOpen: Lorentz force in vector form is:

Choose the correct option.

Lorentz force in vector form is:
  • (a)$\vec{F} = B q v \sin\theta$
  • (b)$\vec{F} = q(\vec{v} \times \vec{B})$
  • (c)$\vec{F} = q(\vec{B} \times \vec{v})$
  • (d)$\vec{F} = \vec{v}(q \times \vec{B})$
Show answer

Answer

Correct option: (b)

Answer: (b) $\vec{F} = q(\vec{v} \times \vec{B})$ The magnetic force on a charge $q$ moving with velocity $\vec v$ in field $\vec B$ is $q(\vec v\times\vec B)$, in the direction given by the cross product.
Q1(A)(iv)1 mark · Assertion-reasonOpen: When an electric current is passed through a moving coil galvanometer, its coil…

Study the Assertion and Reason and choose the correct option.

Assertion: When an electric current is passed through a moving coil galvanometer, its coil gets deflected.

Reason: A circular coil produces a uniform magnetic field around itself when an electric current is passed through it.

  • (a)Both Assertion and Reason are true and Reason is the correct explanation for Assertion.
  • (b)Both Assertion and Reason are true but Reason is not the correct explanation for Assertion.
  • (c)Assertion is true and Reason is false.
  • (d)Assertion is false and Reason is true.
Show answer

Answer

Correct option: (c)

Answer: (c) Assertion is true and Reason is false. Assertion is true: the current-carrying coil of a galvanometer experiences a torque in the magnetic field and is deflected. Reason is false: a circular coil produces a non-uniform field around itself (it is uniform only near the centre), so it does not explain the assertion.
Q1(A)(v)1 mark · MCQOpen: When a ray of white light is incident obliquely on the first surface of a…

Choose the correct option.

When a ray of white light is incident obliquely on the first surface of a prism, then
  • (a)red colour is deviated most.
  • (b)green colour is deviated most.
  • (c)yellow colour is deviated most.
  • (d)violet colour is deviated most.
Show answer

Answer

Correct option: (d)

Answer: (d) violet colour is deviated most. Violet has the shortest wavelength and the largest refractive index in glass, so it is deviated most; red is deviated least.
Q1(A)(vi)1 mark · MCQOpen: The de-Broglie wavelength (λ) associated with a moving electron having kinetic…

Choose the correct option.

The de-Broglie wavelength ($\lambda$) associated with a moving electron having kinetic energy ($E$) is given by:
  • (a)$\frac{2h}{\sqrt{2mE}}$
  • (b)$\frac{2\sqrt{2mE}}{h}$
  • (c)$\frac{h}{\sqrt{2mE}}$
  • (d)$\sqrt{2mhE}$
Show answer

Answer

Correct option: (c)

Answer: (c) $\frac{h}{\sqrt{2mE}}$ With $p=\sqrt{2mE}$, the de Broglie wavelength is $\lambda = \frac{h}{p}=\frac{h}{\sqrt{2mE}}$.
Q1(A)(vii)1 mark · MCQOpen: The majority charge carriers in a P-type semiconductor are

Choose the correct option.

The majority charge carriers in a P-type semiconductor are
  • (a)electrons.
  • (b)holes.
  • (c)protons.
  • (d)ions.
Show answer

Answer

Correct option: (b)

Answer: (b) holes. A p-type semiconductor is doped with a trivalent impurity, which creates holes; holes are the majority charge carriers and electrons the minority carriers.
Q1(B)(i)1 mark · Short answerOpen: In an electric dipole, what is the locus of a point having zero potential?

Answer the following.

In an electric dipole, what is the locus of a point having zero potential?
Show answer

Answer

The locus of points of zero potential is the equatorial plane of the dipole: the plane perpendicular to the dipole axis passing through its centre (the perpendicular bisector of the line joining the charges).
Q1(B)(ii)1 mark · Short answerOpen: Three identical cells each of emf ‘e’ are connected in parallel to form a…

Answer the following.

Three identical cells each of emf ‘e’ are connected in parallel to form a battery. What is the emf of the battery?
Show answer

Answer

The emf of the battery is $e$, the same as that of a single cell. In parallel connection the emf does not add up; only the internal resistance falls to $r/3$.
Q1(B)(iii)1 mark · Short answerOpen: Three bulbs B₁(230 V, 40 W), B₂(230 V, 60 W) and B₃(230 V, 100 W) are connected…

Answer the following.

Three bulbs $B_1(230\text{ V}, 40\text{ W})$, $B_2(230\text{ V}, 60\text{ W})$ and $B_3(230\text{ V}, 100\text{ W})$ are connected in series to a $230\text{ V}$ supply. Which bulb glows the brightest?
Show answer

Answer

Formulas used: Electric power: P = V*I with P = 40 W, V = 230 V, so R = 1322.5 ohm Electric power: P = V*I with P = 60 W, V = 230 V, so R = 881.7 ohm Electric power: P = V*I with P = 100 W, V = 230 V, so R = 529 ohm

Bulb $B_1$ (40 W) glows the brightest. From $R = V^2/P$: $R_1 = 1322.5\ \Omega$, $R_2 = 881.7\ \Omega$, $R_3 = 529\ \Omega$. In series the same current flows, so $P = I^2R$ is greatest for the largest resistance, that of $B_1$.
Q1(B)(vi)1 mark · Short answerOpen: What is ‘Pair production’?

Answer the following.

What is ‘Pair production’?
Show answer

Answer

Pair production is the conversion of a high-energy gamma-ray photon (energy at least $1.02\text{ MeV}$) into an electron and a positron while passing near a heavy nucleus.
Q2(i)2 marks · Short answerOpen: A hollow sphere of radius R has a point charge q at its centre. Electric flux…

Answer the following.

A hollow sphere of radius R has a point charge q at its centre. Electric flux emanating from the sphere is X. How will the electric flux change, if at all, when
(a)[1]
radius of the sphere is doubled?
(b)[1]
charge q is replaced by an electric dipole?
Show answer

Answer (a)

The flux does not change; it remains $X$, since by Gauss's law $\phi = q/\varepsilon_0$ depends only on the enclosed charge and not on the radius.

Answer (b)

The flux becomes zero, since the net charge enclosed by an electric dipole is zero ($+q-q=0$).
Q2(ii)2 marks · Short answerOpen: In case of an infinite line charge, how does intensity of electric field at a…

Answer the following.

In case of an infinite line charge, how does intensity of electric field at a point change, if at all, when
(a)[1]
charge on it is doubled?
(b)[1]
distance of the point is halved?
Show answer

Answer (a)

The intensity is doubled, since $E = \frac{\lambda}{2\pi\varepsilon_0 r}\propto\lambda$.

Answer (b)

The intensity is doubled, since $E\propto \frac{1}{r}$; halving the distance doubles $E$.
Q3(i)1 mark · Short answerOpen: What is meant by the statement: “Relative permittivity of water is 81”?

Answer the following.

What is meant by the statement: “Relative permittivity of water is 81”?
Show answer

Answer

The force between two charges placed in water is $\frac{1}{81}$ of the force between them at the same separation in vacuum; that is, $\varepsilon_r = \frac{\varepsilon}{\varepsilon_0} = 81$.
Q4(ii)1 mark · Short answerOpen: Why is the core of a transformer made of soft iron and not of steel?

Answer the following.

Why is the core of a transformer made of soft iron and not of steel?
Show answer

Answer

Soft iron has low hysteresis loss (a narrow hysteresis loop, low retentivity and coercivity), so it is magnetised and demagnetised easily with little energy wasted as heat; steel has a wide loop and large loss.
Q5(ii)1 mark · Short answerOpen: What is the speed of radio waves in vacuum?

Answer the following.

What is the speed of radio waves in vacuum?
Show answer

Answer

$3\times10^{8}\text{ m s}^{-1}$, the same as the speed of all electromagnetic waves in vacuum.
Q62 marks · DrawingOpen: Draw a labelled graph showing the variation in intensity of diffracted light…

Draw the following.

Draw a labelled graph showing the variation in intensity of diffracted light with diffracting angle in a single slit Fraunhofer diffraction experiment.

Draw: labelled graph showing the variation in intensity of diffracted light with diffracting angle in a single slit Fraunhofer diffraction experiment

Must show: central maximum, secondary maxima and minima, intensity on y-axis and diffracting angle on x-axis

Show answer

Answer

The graph is a plot of intensity $I$ (y-axis) against diffracting angle $\theta$ (x-axis), symmetrical about $\theta = 0$. It shows a tall, broad central maximum at $\theta=0$, with zero-intensity minima at $\theta=\pm\frac{\lambda}{a},\pm\frac{2\lambda}{a},\pm\frac{3\lambda}{a}$ and so on; between them are weak secondary maxima, the first being only about 5% of the central one, falling in height further out. The central maximum is twice as wide as each secondary maximum.
Symmetric intensity curve with a tall central maximum, zero minima at multiples of lambda/a and weak secondary maxima; axes labelled intensity and diffracting angle.
Q7(i)2 marks · Short answerOpen: Figure 1 below is the Energy level diagram for Hydrogen atom. Study the…

Answer the following.

Figure 1 below is the Energy level diagram for Hydrogen atom. Study the transitions shown and answer the following questions.
Figure for this question
(a)[1]
State the type of spectrum obtained.
(b)[1]
Name the series of spectrum obtained.
Show answer

Answer (a)

An emission line spectrum, since the electron falls from higher levels ($n=4$ and $n=3$) to a lower level ($n=2$), emitting photons of definite energies.

Answer (b)

The Balmer series, since the transitions ($n=4\to2$ and $n=3\to2$) end on the level $n=2$.
Q7(ii)2 marks · Short answerOpen: In a nuclear reactor, state the use of the following: Graphite rods Cadmium rods

Answer the following.

In a nuclear reactor, state the use of the following:
(a)[1]
Graphite rods
(b)[1]
Cadmium rods
Show answer

Answer (a)

Graphite rods act as the moderator: they slow down the fast neutrons to thermal neutrons so that they can cause further fission.

Answer (b)

Cadmium rods act as control rods: they absorb excess neutrons and so control the rate of the chain reaction.
Q93 marks · DerivationOpen: Obtain an expression for equivalent capacitance C when three capacitors C₁, C₂…

Derive the following.

Obtain an expression for equivalent capacitance C when three capacitors $C_1$, $C_2$ and $C_3$ are connected in series.

Given: Three capacitors $C_1$, $C_2$ and $C_3$ connected in series across a potential difference V

To show: $\frac{1}{C} = \frac{1}{C_1} + \frac{1}{C_2} + \frac{1}{C_3}$

Show answer

Answer

Capacitors in series carry the same charge; the p.d.s add up.
  1. 1. Let $C_1$, $C_2$, $C_3$ be connected in series across a potential difference $V$. Each capacitor carries the same charge $Q$ (the inner plates are charged only by induction).
  2. 2. Let the p.d. across them be $V_1$, $V_2$, $V_3$. From $Q = CV$: $V_1 = \frac{Q}{C_1}$, $V_2 = \frac{Q}{C_2}$, $V_3 = \frac{Q}{C_3}$.
  3. 3. The total p.d. is the sum of the individual p.d.s: $V = V_1 + V_2 + V_3 = Q\left(\frac{1}{C_1} + \frac{1}{C_2} + \frac{1}{C_3}\right)$.
  4. 4. For the equivalent capacitor $C$ holding the same charge $Q$ at the same p.d. $V$: $V = \frac{Q}{C}$.
  5. 5. Equating steps 3 and 4: $\frac{Q}{C} = Q\left(\frac{1}{C_1} + \frac{1}{C_2} + \frac{1}{C_3}\right)$, so $\frac{1}{C} = \frac{1}{C_1} + \frac{1}{C_2} + \frac{1}{C_3}$.
Q10(i)3 marks · NumericalOpen: Figure 2 below shows two batteries E₁ and E₂ having emfs of 18 V and 10 V and…

Solve the following.

Figure 2 below shows two batteries $E_1$ and $E_2$ having emfs of $18\text{ V}$ and $10\text{ V}$ and internal resistances of $1\,\Omega$ and $2\,\Omega$ respectively. $W_1$, $W_2$ and $W_3$ are uniform metallic wires AC, FD and BE having resistance of $8\,\Omega$, $6\,\Omega$ and $10\,\Omega$ respectively. B and E are midpoints of the wires $W_1$ and $W_2$. Using Kirchhoff’s laws of electrical circuits, calculate the current flowing in the wire $W_3$.
Figure for this question
Show answer

Answer

Given: $E_1 = 18\text{ V}$, $r_1 = 1\,\Omega$; $E_2 = 10\text{ V}$, $r_2 = 2\,\Omega$. $AB = BC = 4\,\Omega$, $FE = ED = 3\,\Omega$, $BE = 10\,\Omega$. At junction B (Kirchhoff's current law): $I_3 = I_1 + I_2$. Loop ABEFA (Kirchhoff's voltage law): $18 = I_1(1+4+3) + 10I_3 \Rightarrow 8I_1 + 10I_3 = 18$. Loop CBEDC: $10 = I_2(2+4+3) + 10I_3 \Rightarrow 9I_2 + 10I_3 = 10$. Substituting $I_3 = I_1 + I_2$ and solving: $I_1 = 1\text{ A}$, $I_2 = 0$, $I_3 = 1\text{ A}$ (from B to E).

Final answer: 1 A

Q10(ii)3 marks · NumericalOpen: Figure 3 below shows a potentiometer circuit in which the driver cell D has an…

Solve the following.

Figure 3 below shows a potentiometer circuit in which the driver cell D has an emf of $6\text{ V}$ and internal resistance of $2\,\Omega$. The potentiometer wire AB is $10\text{ m}$ long and has a resistance of $28\,\Omega$. The series resistance $R_s$ is of $20\,\Omega$. Calculate:
Figure for this question
(a)[1.5]
The current $I_p$ flowing in the potentiometer wire AB when the jockey (J) does not touch the wire AB.
(b)[1.5]
Emf of the cell X if the balancing length AC is $4.5\text{ m}$.
Show answer

Answer (a)

Formulas used: Resistors in series: R = R1 + R2 + R3 with R1 = 20 ohm, R2 = 28 ohm, R3 = 2 ohm, so R = 50 ohm Ohm's law: V = I*R with R = 50 ohm, V = 6 V, so I = 0.12 A

With the jockey not touching the wire, the driver cell, $R_s$ and the wire AB are in series, so the total resistance is $20 + 28 + 2 = 50\,\Omega$ and $I_p = \frac{6}{50} = 0.12\text{ A}$.

Final answer: 0.12 A

Answer (b)

Formula used: Potential gradient of a potentiometer wire: k = V/L with L = 10 m, V = 3.36 V, so k = 0.336 V m^-1

p.d. across the wire: $V = I_pR_{AB} = 0.12\times28 = 3.36\text{ V}$. Potential gradient: $k = \frac{V}{L} = \frac{3.36}{10} = 0.336\text{ V m}^{-1}$. At balance, $E_X = k\,l = 0.336\times4.5 = 1.512\text{ V}$.

Final answer: 1.51 V

Q113 marks · DerivationOpen: Using Biot-Savart law, show that magnetic flux density ‘B’ at the centre of a…

Derive the following.

Using Biot-Savart law, show that magnetic flux density ‘B’ at the centre of a current carrying circular coil of radius R is given by: $B = \frac{\mu_0 I}{2R}$ where the terms have their usual meaning.

Given: A circular coil of radius R carrying current I, and Biot-Savart law $dB = \frac{\mu_0}{4\pi} \frac{I dl \sin\theta}{r^2}$

To show: $B = \frac{\mu_0 I}{2R}$

Show answer

Answer

Biot-Savart law applied to a circular coil.
  1. 1. Consider a circular coil of radius $R$ carrying current $I$. Take a small element $d\vec l$ of the coil. By the Biot-Savart law, the field at the centre O due to it is $dB = \frac{\mu_0}{4\pi}\frac{I\,dl\sin\theta}{r^2}$.
  2. 2. Every element is at distance $r = R$ from the centre, and $d\vec l$ is tangential while $\vec r$ is radial, so $\theta = 90^\circ$ and $\sin\theta = 1$. Hence $dB = \frac{\mu_0}{4\pi}\frac{I\,dl}{R^2}$.
  3. 3. By the right-hand rule, the field due to every element at the centre is in the same direction (perpendicular to the plane of the coil), so the magnitudes add directly: $B = \int dB = \frac{\mu_0 I}{4\pi R^2}\int dl$.
  4. 4. The sum of all the elements is the circumference: $\int dl = 2\pi R$.
  5. 5. Therefore $B = \frac{\mu_0 I}{4\pi R^2}\times 2\pi R = \frac{\mu_0 I}{2R}$.
Q12(i)1 mark · Short answerOpen: What is the direction of magnetic flux density B of the magnetic field at the…

Answer the following.

What is the direction of magnetic flux density B of the magnetic field at the point P?
Figure for this question
Show answer

Answer

The magnetic field at P is directed perpendicular to the plane of the paper, into the paper. By the right-hand thumb rule, with the thumb along the upward current, the fingers curl into the page on the right side of the wire.
Q12(iii)1 mark · Short answerOpen: Another metallic wire MN having length l and carrying a current I is now kept…

Answer the following.

Another metallic wire MN having length $l$ and carrying a current I is now kept at the point P. If the two wires are in vacuum and parallel to each other, how much force acts on the wire MN due to the current $I'$ flowing in the wire YY'?
Figure for this question
Show answer

Answer

The force on MN is $F = BIl\sin 90^\circ = \frac{\mu_0 I I' l}{2\pi r}$. It is attractive if the two currents are in the same direction and repulsive if they are opposite.
Q13(i)3 marks · DerivationOpen: Using Huygen’s wave theory, show that (for refraction of light): (sin i)/(sin…

Derive the following.

Using Huygen’s wave theory, show that (for refraction of light): $\frac{\sin i}{\sin r} = \text{Constant}$ where terms have their usual meaning. You must draw a neat and labelled diagram.

To show: $\frac{\sin i}{\sin r} = \text{Constant}$

Show answer

Answer

Huygens' construction for refraction at a plane surface.
  1. 1. Let a plane wavefront AB be incident on the plane surface XY separating a rarer medium 1 (speed $v_1$) from a denser medium 2 (speed $v_2$, $v_2 < v_1$). The angle of incidence is $i$ and the angle of refraction is $r$. Let the point A of the wavefront touch the surface at A at $t = 0$, while B reaches the surface at C after a time $t$, so $BC = v_1t$.
  2. 2. By Huygens' principle, each point on the surface becomes a source of secondary wavelets once the wavefront reaches it. During the time $t$ in which B travels to C, the wavelet from A spreads into medium 2 with radius $AE = v_2t$.
  3. 3. The tangent CE from C to this secondary wavelet is the refracted wavefront. The incident wavefront AB makes angle $i$ with the surface, so $\angle BAC = i$; the refracted wavefront CE makes angle $r$ with the surface, so $\angle ECA = r$.
  4. 4. In right-angled triangle ABC: $\sin i = \frac{BC}{AC} = \frac{v_1t}{AC}$.
  5. 5. In right-angled triangle AEC: $\sin r = \frac{AE}{AC} = \frac{v_2t}{AC}$.
  6. 6. Dividing step 4 by step 5: $\frac{\sin i}{\sin r} = \frac{v_1}{v_2}$, which is a constant for the two given media (and the given colour of light), equal to the refractive index $n$ of medium 2 with respect to medium 1.
  7. 7. Hence $\frac{\sin i}{\sin r} = \text{Constant}$ (Snell's law).
Diagram: plane wavefront AB incident on surface XY at angle i, secondary wavelet of radius v2 t about A in medium 2, refracted wavefront CE, normals and rays labelled i and r.
Q13(ii)3 marks · DerivationOpen: In Young’s double slit experiment, show that: β = (λ D)/d where the terms have…

Derive the following.

In Young’s double slit experiment, show that: $\beta = \frac{\lambda D}{d}$ where the terms have their usual meaning.

To show: $\beta = \frac{\lambda D}{d}$

Show answer

Answer

Young's double slit experiment: fringe width.
  1. 1. Let $S_1$ and $S_2$ be two coherent slits a distance $d$ apart, and let the screen be at a distance $D$ from the slits ($D \gg d$). Let P be a point on the screen at a distance $x$ from the centre O of the screen.
  2. 2. The path difference at P is $S_2P - S_1P = \frac{xd}{D}$ (for small angles, from the geometry of the two right-angled triangles).
  3. 3. For a bright fringe (constructive interference) the path difference must be a whole number of wavelengths: $\frac{x_nd}{D} = n\lambda$, so $x_n = \frac{n\lambda D}{d}$, with $n = 0, 1, 2, \dots$
  4. 4. For a dark fringe (destructive interference) the path difference is $\left(n+\frac12\right)\lambda$, so $x_n = \left(n+\frac12\right)\frac{\lambda D}{d}$.
  5. 5. The fringe width $\beta$ is the distance between two consecutive bright (or dark) fringes: $\beta = x_{n+1} - x_n = \frac{(n+1)\lambda D}{d} - \frac{n\lambda D}{d}$.
  6. 6. Therefore $\beta = \frac{\lambda D}{d}$.
Q143 marks · NumericalOpen: Figure 5 below shows a ray of monochromatic light LM incident on the first…

Solve the following.

Figure 5 below shows a ray of monochromatic light LM incident on the first surface AB of a regular (equilateral) glass prism ABC. The emergent ray grazes the adjacent surface AC. Calculate the angle of incidence. (Refractive Index of glass = 1.5)
Figure 5
Figure 5
Show answer

Answer

Formulas used: Critical angle (n1 the denser medium): C = asin(n2/n1) with n1 = 1.5, n2 = 1, so C = 41.81 deg Snell's law (r in the second medium): r = asin(n1*sin(i)/n2) with i = 27.92 deg, n1 = 1, n2 = 1.5, so r = 18.19 deg

Given: prism angle $A = 60^\circ$, $n = 1.5$. The emergent ray grazes face AC, so the angle of emergence is $90^\circ$ and the angle of incidence $r_2$ at N is the critical angle $C$. At N: $\sin r_2 = \frac{1}{n} = \frac{1}{1.5}$, so $r_2 = 41.8^\circ$. In a prism, $r_1 + r_2 = A$, so $r_1 = 60^\circ - 41.8^\circ = 18.2^\circ$. At M (Snell's law): $\sin i = n\sin r_1 = 1.5\times\sin 18.2^\circ = 0.468$. Hence $i = 27.9^\circ$.

Final answer: 27.9 degrees

Q15(i)1 mark · Short answerOpen: A student is performing an experiment to determine focal length of a convex…

Answer the following.

A student is performing an experiment to determine focal length of a convex lens by using lens formula i.e., by no parallax method. The examiner gives some instructions to the student. The student responds to each instruction as per her understanding of the experiment. State whether the student's response is correct or incorrect. Give a reason for your answer. EXAMINER: Image formed by the lens is magnified. Reduce the size of the image. STUDENT moves the lens towards the object pin.
Show answer

Answer

Incorrect. The image is magnified, so the object pin lies between $f$ and $2f$ of the lens. To reduce the size of the image the lens should be moved away from the object pin (so that $u > 2f$); moving it towards the pin increases the magnification.
Q15(ii)1 mark · Short answerOpen: A student is performing an experiment to determine focal length of a convex…

Answer the following.

A student is performing an experiment to determine focal length of a convex lens by using lens formula i.e., by no parallax method. The examiner gives some instructions to the student. The student responds to each instruction as per her understanding of the experiment. State whether the student's response is correct or incorrect. Give a reason for your answer. EXAMINER: Plot a graph of $(1/v)$ against $(1/u)$. STUDENT takes $(1/v)$ on Y axis and $(1/u)$ on X axis.
Show answer

Answer

Correct. In a graph of one quantity "against" another, the second quantity ($1/u$) goes on the X axis and the first ($1/v$) on the Y axis; the straight line then cuts the Y axis at $1/f$.
Q15(iii)1 mark · Short answerOpen: A student is performing an experiment to determine focal length of a convex…

Answer the following.

A student is performing an experiment to determine focal length of a convex lens by using lens formula i.e., by no parallax method. The examiner gives some instructions to the student. The student responds to each instruction as per her understanding of the experiment. State whether the student's response is correct or incorrect. Give a reason for your answer. EXAMINER: Write the relation between the optical power ($P$) and the focal length ($f$) of the convex lens. STUDENT writes $P = 2f$.
Show answer

Answer

Incorrect. The optical power of a lens is the reciprocal of its focal length, $P = \dfrac{1}{f}$ (with $f$ in metres), not $P = 2f$.
Q16(i)1.5 marks · Short answerOpen: In an experiment on photo electric effect, how does stopping potential change…

Answer the following.

In an experiment on photo electric effect, how does stopping potential change, if at all, when intensity of incident monochromatic UV radiation is increased?
Show answer

Answer

The stopping potential does not change; it depends only on the frequency of the incident radiation and the metal, not on the intensity ($eV_0 = h\nu - \phi_0$). Increasing the intensity only increases the number of photoelectrons emitted per second (the photocurrent).
Q16(ii)1.5 marks · Short answerOpen: Ultraviolet light is incident on metals P, Q and R, having work functions 8 eV…

Answer the following.

Ultraviolet light is incident on metals P, Q and R, having work functions $8\text{ eV}$, $2\text{ eV}$ and $4\text{ eV}$ respectively. (a) Which metal has lowest threshold frequency for photoelectric effect? (b) For which metal is the value of $E_{\max}$ minimum? (Note: $E_{\max}$ is maximum kinetic energy of the emitted photoelectrons.)
Show answer

Answer

(a) Metal Q: threshold frequency $\nu_0 = \frac{\phi_0}{h}$, which is lowest for the lowest work function ($2\text{ eV}$). (b) Metal P: $E_{\max} = h\nu - \phi_0$ is least for the metal with the largest work function ($8\text{ eV}$), for the same incident UV light.
Q17(i)1.5 marks · Short answerOpen: What is meant by forward biasing of a semiconductor diode?

Answer the following.

What is meant by forward biasing of a semiconductor diode?
Show answer

Answer

In forward biasing the p-side of the diode is connected to the positive terminal and the n-side to the negative terminal of the battery. This reduces the potential barrier and the width of the depletion region, so a large forward current flows.
Q17(ii)1.5 marks · DrawingOpen: Draw a labelled characteristic curve (I-V graph) for a semiconductor diode…

Answer the following.

Draw a labelled characteristic curve (I-V graph) for a semiconductor diode during forward bias.

Draw: labelled characteristic curve (I-V graph) for a semiconductor diode during forward bias

Must show: knee voltage / threshold voltage, forward voltage on x-axis, forward current in mA on y-axis

Show answer

Answer

A graph of forward current $I$ (mA, y-axis) against forward voltage $V$ (volt, x-axis). The current is almost zero up to the knee (threshold) voltage (about $0.7\text{ V}$ for silicon, $0.3\text{ V}$ for germanium), then rises steeply and almost linearly with a small increase of voltage. The knee voltage is marked on the x-axis.
Forward I-V curve: almost zero current up to knee voltage, then a steep rise; axes forward voltage (V) and forward current (mA).
Q18(i)5 marks · NumericalOpen: A 220 V, 50 Hz ac source is connected to a coil having coefficient of…

Answer the following.

(a)[2.5]
A $220\text{ V}$, $50\text{ Hz}$ ac source is connected to a coil having coefficient of self-inductance of $1\text{ H}$ and a resistance of $400\,\Omega$. Calculate: (1) the reactance of the coil. (2) the impedance of the coil. (3) the current flowing through the coil.
(b)[2.5]
Draw a labelled graph showing variation of impedance (Z) of a series LCR circuit vs frequency (f) of the ac supply. Mark the resonant frequency as $f_0$.

Draw: labelled graph showing variation of impedance (Z) of a series LCR circuit vs frequency (f) of the ac supply

Must show: impedance Z on y-axis, frequency f on x-axis, minimum impedance Z = R at resonant frequency f0

Show answer

Answer (a)

Formulas used: Inductive reactance: XL = 2*pi*f*L with L = 1 H, f = 50 Hz, so XL = 314.2 ohm Impedance of a series LCR circuit (leave out the reactance it doesn't have): Z = sqrt(R**2 + (XL - XC)**2) with R = 400 ohm, XL = 314.2 ohm, so Z = 508.6 ohm Ohm's law: V = I*R with R = 508.6 ohm, V = 220 V, so I = 0.4325 A

(1) Reactance of the coil: $X_L = 2\pi fL = 2\pi\times50\times1 = 314.2\,\Omega$. (2) Impedance: $Z = \sqrt{R^2 + X_L^2} = \sqrt{400^2 + 314.2^2} = 508.6\,\Omega$. (3) Current: $I = \frac{V}{Z} = \frac{220}{508.6} = 0.433\text{ A}$.

Final answer: 0.433 A

Answer (b)

A graph of impedance $Z$ (y-axis) against frequency $f$ (x-axis) for a series LCR circuit. $Z$ falls from a high value at low frequency (capacitive, $X_C$ large) to a minimum value $Z = R$ at the resonant frequency $f_0 = \frac{1}{2\pi\sqrt{LC}}$, then rises again for $f > f_0$ (inductive). The curve is a U-shape (a dip) with the minimum at $f_0$, and $R$ is marked on the $Z$ axis.
U-shaped Z-f curve with its minimum Z = R at f0 = 1/(2 pi sqrt(LC)); axes impedance Z and frequency f.
Q18(ii)5 marks · NumericalOpen: When current flowing through a solenoid decreases from 5 A to 0 in 20…

Answer the following.

(a)[2.5]
When current flowing through a solenoid decreases from $5\text{ A}$ to 0 in $20\text{ milliseconds}$, an emf of $500\text{ V}$ is induced in it. (1) What is this phenomenon called? (2) Calculate coefficient of self-inductance of the solenoid.
(b)[2.5]
(1) RMS value of an alternating current flowing in a circuit is $5\text{ A}$. Calculate its peak value. (2) State any one difference between a direct current (dc) and an alternating current (ac).
Show answer

Answer (a)

Formula used: Self-induced emf: emf = L*dI/dt with dI = 5 A, dt = 0.02 s, emf = 500 V, so L = 2 H

(1) The phenomenon is self-induction. (2) $|\varepsilon| = L\frac{dI}{dt}$, so $L = \frac{\varepsilon\,dt}{dI} = \frac{500\times20\times10^{-3}}{5} = 2\text{ H}$.

Final answer: 2 H

Answer (b)

Formula used: rms and peak values: rms = peak/sqrt(2) with rms = 5 A, so peak = 7.071 A

(1) Peak value $I_0 = \sqrt{2}\,I_{rms} = \sqrt2\times5 = 7.07\text{ A}$. (2) A direct current has a constant direction (and magnitude), whereas an alternating current changes its direction periodically (and its magnitude varies with time).
Q19(i)5 marks · DerivationOpen: On the basis of Bohr’s theory, derive an expression for the radius of the…

Answer the following.

(a)[2.5]
On the basis of Bohr’s theory, derive an expression for the radius of the $n^{\text{th}}$ orbit of an electron of hydrogen atom.

Given: Bohr's postulates: $mvr = \frac{nh}{2\pi}$ and $\frac{mv^2}{r} = \frac{1}{4\pi\varepsilon_0}\frac{e^2}{r^2}$

To show: $r_n = \frac{\varepsilon_0 n^2 h^2}{\pi m e^2}$

(b)[2.5]
Calculate the energy released in the following nuclear fusion reaction: ${}^2_1\text{H} + {}^2_1\text{H} \to {}^4_2\text{He} + \text{energy}$ Mass of ${}^2_1\text{H} = 2.014102\text{ u}$ Mass of ${}^4_2\text{He} = 4.002604\text{ u}$
Show answer

Answer (a)

Radius of the nth Bohr orbit of hydrogen.
  1. 1. An electron of mass $m$ and charge $e$ moves in a circular orbit of radius $r_n$ with speed $v$ around the nucleus (charge $+e$). The electrostatic attraction provides the centripetal force: $\frac{mv^2}{r_n} = \frac{1}{4\pi\varepsilon_0}\frac{e^2}{r_n^2}$, so $mv^2 = \frac{e^2}{4\pi\varepsilon_0 r_n}$.
  2. 2. By Bohr's quantisation condition, the angular momentum is an integral multiple of $\frac{h}{2\pi}$: $mvr_n = \frac{nh}{2\pi}$, so $v = \frac{nh}{2\pi m r_n}$.
  3. 3. Substitute $v$ from step 2 in step 1: $m\left(\frac{nh}{2\pi m r_n}\right)^2 = \frac{e^2}{4\pi\varepsilon_0 r_n}$, that is $\frac{n^2h^2}{4\pi^2 m r_n^2} = \frac{e^2}{4\pi\varepsilon_0 r_n}$.
  4. 4. Solving for $r_n$: $r_n = \frac{n^2h^2\,4\pi\varepsilon_0}{4\pi^2 m e^2}$.
  5. 5. Hence $r_n = \frac{\varepsilon_0 n^2 h^2}{\pi m e^2}$, so $r_n \propto n^2$.

Answer (b)

Mass defect $\Delta m = 2(2.014102) - 4.002604 = 0.025600\text{ u}$. Energy released $E = \Delta m\times931.5\text{ MeV u}^{-1} = 0.025600\times931.5 = 23.85\text{ MeV}$.

Final answer: 23.8 MeV

Q19(ii)5 marks · NumericalOpen: Calculate mass defect and binding energy of ²⁰₁₀Ne nucleus, given: Mass of…

Answer the following.

(a)[1.5]
Calculate mass defect and binding energy of ${}^{20}_{10}\text{Ne}$ nucleus, given: Mass of ${}^{20}_{10}\text{Ne} = 19.992397\text{ u}$ Mass of ${}^1_1\text{H} = 1.007825\text{ u}$ Mass of ${}^1_0\text{n} = 1.008665\text{ u}$
(b)[1.5]
State the Bohr’s postulate of angular momentum of an electron.
(c)[2]
(1) What is the velocity of an electron in the $3^{\text{rd}}$ orbit of hydrogen atom if its velocity in the $1^{\text{st}}$ orbit is $v_0$? (2) Radius of the $1^{\text{st}}$ orbit of hydrogen atom is $r_0$. What will be the radius of the $4^{\text{th}}$ orbit?
Show answer

Answer (a)

Ne-20 has $Z = 10$ protons and $N = 10$ neutrons. Mass defect $\Delta m = 10(1.007825) + 10(1.008665) - 19.992397 = 10.07825 + 10.08665 - 19.992397 = 0.172503\text{ u}$. Binding energy $= \Delta m\times931.5 = 0.172503\times931.5 = 160.7\text{ MeV}$.

Final answer: 160.7 MeV

Answer (b)

Bohr's postulate: an electron revolves only in those orbits for which its angular momentum is an integral multiple of $\frac{h}{2\pi}$: $mvr = \frac{nh}{2\pi}$, where $n = 1, 2, 3, \dots$

Answer (c)

(1) $v_n \propto \frac{1}{n}$, so $v_3 = \frac{v_0}{3}$. (2) $r_n \propto n^2$, so $r_4 = 4^2r_0 = 16r_0$.

Final answer: $\frac{v_0}{3}$ and $16r_0$

Q205 marks · Case basedOpen: There are two types of optical instruments: Microscopes and Telescopes…

Answer the following.

There are two types of optical instruments: Microscopes and Telescopes. Microscopes are used to magnify very tiny objects whereas telescopes are used to study distant objects. Both of them deploy convex lenses. In his telescope, Newton used a large parabolic mirror to collect light from the stars and reduce aberrations.
(i)[1]
Rohit observed the launch of Chandrayan 3 with the help of an optical instrument. Name the instrument used by him.
(ii)[1]
State any one advantage of a reflecting telescope over a refracting telescope.
(iii)[1]
Which instrument is used to study the structure of a virus?
(iv)[1]
What is the ability of an optical instrument to form enlarged images called?
(v)[1]
What is the difference between a compound microscope and an astronomical telescope (refracting type), as far as their lenses are concerned?
Show answer

Answer (i)

Telescope; distant objects such as a rocket launch are viewed with a telescope.

Answer (ii)

A reflecting telescope is free from chromatic aberration (a mirror does not disperse light); it also gives brighter images since a large mirror can be used.

Answer (iii)

Electron microscope.

Answer (iv)

Magnifying power (magnification).

Answer (v)

In a compound microscope the objective has a very small focal length and aperture, and the eyepiece has a larger focal length ($f_o < f_e$). In an astronomical telescope the objective has a large focal length and a large aperture, and the eyepiece has a small focal length ($f_o > f_e$).

About this board paper

The ISC Physics 2024 Question Paper is a board paper for Class 12: 49 questions in printed order, 70 marks in all, asked from 15 chapters. The board paper is the exam itself: the question paper CISCE set for that year’s ISC candidates. Solve it in one sitting, in the time allowed, to see how questions are worded and how hard the real paper is.

The layout of the current Physics paper (sections, marks, choices) is in the paper pattern guide.

By section

SectionQuestionsMarks printed*
(not tagged)33
A1414
B1318
C1430
D525

By kind of question

KindQuestionsMarks printed*
Short answer2833.5
Numerical624
Derivation517
MCQ66
Case based15
Drawing23.5
Assertion-reason11

By chapter

ChapterQuestionsMarks printed*
Ray Optics and Optical Instruments612
Current Electricity610
Wave Optics49
Moving charges and magnetism68
Alternating Current37
Atoms27
Nuclei27
Semiconductor diode56
Electric Charges and Fields46
Dual Nature of Radiation and Matter45
Electromagnetic Induction15
Electrostatic Potential, Potential Energy and Capacitance24
Electromagnetic Waves22
Magnetism and Matter11
Semiconductor Electronics: Materials, Devices and Simple Circuits11

* Marks are those printed on each question; where a question offers an either-or choice, both options are counted, so the totals can come to more than the paper’s own total.

Common questions

How many questions are in the ISC Physics 2024 Question Paper?

49 questions, 70 marks in all, shown in full and in printed order on this page.

Which chapters does the ISC Physics 2024 Question Paper ask most about?

By number of questions: Ray Optics and Optical Instruments (6), Current Electricity (6), Moving charges and magnetism (6) and Semiconductor diode (5).

Does this page have the answers to the ISC Physics 2024 Question Paper?

Tap “Show answer” under a question to see its answer. The download button saves the paper as a PDF, with or without the answers.