Prashnikaप्रश्निका
Code
About
PhysicsSpecimenClass 12

ISC Physics 2023 Specimen Paper with Answers

The ISC Physics 2023 Specimen Paper for Class 12: all 45 questions, 70 marks in all, in printed order and in full. It is free to download: tap "Show answer" under a question to see its answer, or use the download button to save the questions as a PDF, with or without answers; "Print this paper" below prints it as it was set.

45questions
70marks
14chapters
Q1(A)(i)1 mark · MCQOpen: The surface charge density of a large conducting sheet is 17·7 × 10⁻⁶ C·m⁻²…

Choose the correct option.

The surface charge density of a large conducting sheet is $17\cdot7 \times 10^{-6}\text{ C}\cdot\text{m}^{-2}$. The electric field intensity at a point outside the sheet but close to it is:
  • (a)1 × 104 N C-1
  • (b)5 × 104 N C-1
  • (c)1 × 105 N C-1
  • (d)1 × 106 N C-1
Show answer

Answer

Correct option: (d)

Answer: (d) $1 \times 10^{6}\text{ N C}^{-1}$ Taking the printed $\sigma$ as the charge density of the sheet as a whole, the field close to it is $E=\frac{\sigma}{2\epsilon_0}=\frac{17.7\times10^{-6}}{2\times 8.85\times10^{-12}}=1\times10^{6}\text{ N C}^{-1}$.
Q1(A)(ii)1 mark · MCQOpen: If R₁ and R₂ are filament resistances of a 100 W bulb and a 50 W bulb…

Choose the correct option.

If $R_1$ and $R_2$ are filament resistances of a $100\text{ W}$ bulb and a $50\text{ W}$ bulb respectively, designed to operate on the same voltage, then:
  • (a)$R_1 = R_2$
  • (b)$R_1 = 4R_2$
  • (c)$R_2 = 4R_1$
  • (d)$R_2 = 2R_1$
Show answer

Answer

Correct option: (d)

Answer: (d) $R_2 = 2R_1$ At the same voltage $R=\frac{V^2}{P}$, so $R\propto\frac{1}{P}$. Hence $\frac{R_1}{R_2}=\frac{50}{100}=\frac{1}{2}$, i.e. $R_2=2R_1$.
Q1(A)(iii)1 mark · MCQOpen: Magnetic flux density (B) of the magnetic field at a point on the axis of a…

Choose the correct option.

Magnetic flux density ($B$) of the magnetic field at a point on the axis of a long straight solenoid is given by:
  • (a)$B = \mu_0 n I$
  • (b)$B = \frac{\mu_0 I}{2r}$
  • (c)$B = \frac{\mu_0 I}{4\pi r}$
  • (d)$B = \mu_0 I$
Show answer

Answer

Correct option: (a)

Answer: (a) $B = \mu_0 n I$ Inside a long solenoid the field on the axis is uniform and equals $\mu_0$ times the number of turns per unit length times the current.
Q1(A)(iv)1 mark · MCQOpen: Two thin lenses having optical powers of -8 D and +12 D are placed in contact…

Choose the correct option.

Two thin lenses having optical powers of $-8\text{ D}$ and $+12\text{ D}$ are placed in contact with each other. The focal length of this combination is:
  • (a)$+0\cdot25\text{ m}$
  • (b)$-0\cdot25\text{ m}$
  • (c)$+0\cdot25\text{ cm}$
  • (d)$-0\cdot25\text{ cm}$
Show answer

Answer

Correct option: (a)

Answer: (a) $+0\cdot25\text{ m}$ $P = P_1 + P_2 = -8 + 12 = +4\text{ D}$, so $F = \frac{1}{P} = \frac{1}{4} = +0.25\text{ m}$.
Q1(A)(v)1 mark · MCQOpen: Cylindrical wavefronts are produced by:

Choose the correct option.

Cylindrical wavefronts are produced by:
  • (a)a point source of light
  • (b)a line source of light
  • (c)a source at infinity
  • (d)all types of sources of light
Show answer

Answer

Correct option: (b)

Answer: (b) a line source of light A line (slit) source sends out waves whose surfaces of constant phase are co-axial cylinders.
Q1(A)(vi)1 mark · MCQOpen: The graph of de-Broglie wavelength (λ) of a moving electron versus its velocity…

Choose the correct option.

The graph of de-Broglie wavelength ($\lambda$) of a moving electron versus its velocity ($v$) is:
  • (a)(a)
  • (b)(b)
  • (c)(c)
  • (d)(d)
Figure for this question
Show answer

Answer

Correct option: (b)

Answer: (b) $\lambda=\frac{h}{mv}$, so $\lambda\propto\frac{1}{v}$: the graph is a rectangular hyperbola, falling as $v$ increases and never touching the axes.
Q1(A)(vii)1 mark · MCQOpen: ‘n’ type semiconductor is that which has

Choose the correct option.

‘n’ type semiconductor is that which has
  • (a)holes as majority carriers.
  • (b)free electrons as majority carriers.
  • (c)holes and free electrons equal in number.
  • (d)trivalent element as an impurity.
Show answer

Answer

Correct option: (b)

Answer: (b) free electrons as majority carriers. An n-type semiconductor is doped with a pentavalent impurity, which donates free electrons.
Q1(B)(i)1 mark · Short answerOpen: In an electric dipole, what is the locus of a point having zero potential?

Answer the following.

In an electric dipole, what is the locus of a point having zero potential?
Show answer

Answer

The locus of points of zero potential is the equatorial plane of the dipole: the plane perpendicular to the dipole axis through its centre (the perpendicular bisector of the line joining the charges).
Q1(B)(iii)1 mark · Short answerOpen: Give any one reason why efficiency of a transformer is always less than 1.

Answer the following.

Give any one reason why efficiency of a transformer is always less than 1.
Show answer

Answer

Any one reason: energy losses in the transformer, such as copper loss (heat $I^2R$ in the windings), eddy-current loss or hysteresis loss in the core, or flux leakage, so $P_{out}<P_{in}$ and $\eta<1$.
Q1(B)(iv)1 mark · Short answerOpen: Give an example of coherent sources of light.

Answer the following.

Give an example of coherent sources of light.
Show answer

Answer

Two virtual sources formed from a single source, e.g. the two slits $S_1$ and $S_2$ in Young's double slit experiment illuminated by one narrow slit (same frequency, constant phase difference).
Q1(B)(vi)1 mark · Short answerOpen: State the function of a moderator in a nuclear reactor.

Answer the following.

State the function of a moderator in a nuclear reactor.
Show answer

Answer

The moderator slows down the fast neutrons released in fission to thermal energies, so that they can cause further fission of $^{235}\text{U}$ (e.g. heavy water, graphite).
Q1(B)(vii)1 mark · Short answerOpen: In semiconductors, what is meant by “doping”?

Answer the following.

In semiconductors, what is meant by “doping”?
Show answer

Answer

Doping is the deliberate addition of a small amount of a suitable impurity (trivalent or pentavalent) to a pure semiconductor to increase its conductivity.
Q2(i)2 marks · DrawingOpen: You are provided with many identical capacitors each of capacitance 100 μF. How…

Answer the following.

You are provided with many identical capacitors each of capacitance $100\,\mu\text{F}$. How will you connect a minimum number of them to obtain a capacitance of $75\,\mu\text{F}$? Draw a diagram in support of your answer.

Draw: circuit diagram showing connection of identical capacitors to obtain 75 μF

Show answer

Answer

Worked out by the server: every current and potential difference

PartCurrentp.d.
C10 A0 V
C20 A0 V
C30 A0 V
C40 A0 V
Minimum number of capacitors = 4. Connect three capacitors of $100\,\mu\text{F}$ in parallel, giving $C_p = 100+100+100 = 300\,\mu\text{F}$, and join this combination in series with the fourth $100\,\mu\text{F}$ capacitor: $C=\frac{300\times100}{300+100}=75\,\mu\text{F}$. The diagram shows three capacitors C1, C2, C3 in parallel between points A and B, and capacitor C4 in series with that bank between B and C; each labelled $100\,\mu\text{F}$, the equivalent between A and C being $75\,\mu\text{F}$.
Q2(ii)2 marks · NumericalOpen: Three point charges of 50 nC each are kept at the vertices of an equilateral…

Answer the following.

Three point charges of $50\text{ nC}$ each are kept at the vertices of an equilateral triangle having each side $= 3\text{ m}$. Calculate electrostatic potential energy of the system.
Show answer

Answer

Formula used: Potential energy of two charges: U = k*q1*q2/(K*r) with k = 9e9 N m^2 C^-2, r = 3 m, q1 = 50e-9 C, q2 = 50e-9 C, so U = 7.5e-6 J

Given: $q=50\text{ nC}=50\times10^{-9}\text{ C}$ each, $r=3\text{ m}$, $k=9\times10^{9}\text{ N m}^2\text{C}^{-2}$. The system has three pairs of charges: $U=3\times\frac{kq^2}{r}=3\times\frac{9\times10^{9}\times(50\times10^{-9})^2}{3}=3\times7.5\times10^{-6}\text{ J}$.

Final answer: 2.25e-5 J

Q3(a)1 mark · Short answerOpen: With reference to free electron theory of conductors, define: Drift velocity

Answer the following.

With reference to free electron theory of conductors, define: Drift velocity
Show answer

Answer

Drift velocity is the average velocity with which the free electrons in a conductor drift (opposite to the electric field) under an applied electric field, superimposed on their random thermal motion.
Q3(b)1 mark · Short answerOpen: State any one use of a potentiometer.

Answer the following.

State any one use of a potentiometer.
Show answer

Answer

A potentiometer is used to compare the emfs of two cells (or to measure the internal resistance of a cell).
Q42 marks · Short answerOpen: Explain why a blue coloured spark is often seen in a switch when a circuit…

Answer the following.

Explain why a blue coloured spark is often seen in a switch when a circuit containing an electric iron/geyser is switched off.
Show answer

Answer

On switching off, the current in the inductive load falls very rapidly, so a large emf $\left(\varepsilon=-L\frac{dI}{dt}\right)$ is induced across the switch gap. This large emf ionises the air in the gap and produces a spark; the excited air molecules emit blue light.
Q5(i)2 marks · NumericalOpen: Two long straight wires A and B are kept parallel to each other, 5 cm apart, in…

Solve the following.

Two long straight wires A and B are kept parallel to each other, $5\text{ cm}$ apart, in vacuum. They carry currents of $5\text{ A}$ and $10\text{ A}$ respectively in the same direction as shown in Figure 1 below. Calculate the force per unit length acting on the wire B due to the current flowing in the wire A.
Figure for this question
Show answer

Answer

Formula used: Force between two parallel wires (on length l): F = mu0*I1*I2*l/(2*pi*d) with d = 0.05 m, l = 1 m, I1 = 5 A, I2 = 10 A, mu0 = 1.2566e-6 T m A^-1, so F = 2e-4 N

Given: $I_A=5\text{ A}$, $I_B=10\text{ A}$, $d=5\text{ cm}=0.05\text{ m}$, $\mu_0=4\pi\times10^{-7}\text{ T m A}^{-1}$. Force per unit length: $\frac{F}{l}=\frac{\mu_0 I_A I_B}{2\pi d}=\frac{4\pi\times10^{-7}\times5\times10}{2\pi\times0.05}=2\times10^{-4}\text{ N m}^{-1}$. The currents are in the same direction, so the force on B is attractive (towards A).

Final answer: 2e-4 N m^-1

Q5(ii)2 marks · NumericalOpen: An electron moving with a velocity of 8 × 10⁶ m/s enters a uniform and…

Solve the following.

An electron moving with a velocity of $8 \times 10^6\text{ m/s}$ enters a uniform and transverse magnetic field of $3 \times 10^{-3}\text{ T}$. Calculate the radius of the circular path described by it.
Show answer

Answer

Formula used: Radius of a charge's circle in a magnetic field: r = m*v/(q*B) with B = 3e-3 T, m = 9.1e-31 kg, q = 1.6e-19 C, v = 8e6 m s^-1, so r = 1.52e-2 m

Given: $v=8\times10^{6}\text{ m s}^{-1}$, $B=3\times10^{-3}\text{ T}$, $m=9.1\times10^{-31}\text{ kg}$, $q=1.6\times10^{-19}\text{ C}$. The magnetic force provides the centripetal force: $qvB=\frac{mv^2}{r}$, so $r=\frac{mv}{qB}=\frac{9.1\times10^{-31}\times8\times10^{6}}{1.6\times10^{-19}\times3\times10^{-3}}=1.52\times10^{-2}\text{ m}$.

Final answer: 1.52e-2 m

Q72 marks · DrawingOpen: Draw a neat and labelled ray diagram to show the formation of a primary rainbow.

Draw the following.

Draw a neat and labelled ray diagram to show the formation of a primary rainbow.

Draw: ray diagram showing the formation of a primary rainbow

Must show: spherical raindrop, incident sunlight ray, refraction and dispersion at entry, internal reflection at back surface, refraction at exit into viewer's eye, violet and red ray paths with angles

Show answer

Answer

The diagram shows a spherical raindrop. A ray of sunlight enters the drop and is refracted and dispersed at the first surface (violet bends more than red). It undergoes one total internal reflection at the back of the drop and then is refracted again on leaving the drop, towards the observer's eye. Violet and red rays are drawn separately: the violet emerges at about $40^\circ$ and the red at about $42^\circ$ to the incident sunlight direction, so red is seen on the outer edge of the bow and violet on the inner edge. Labels: sunlight, normal, angle of incidence, angle of refraction, internal reflection, violet, red, observer's eye.
Q8(i)1 mark · Short answerOpen: Depletion region

Answer the following.

Depletion region
Show answer

Answer

The depletion region is the thin region on either side of the p-n junction that is depleted of free charge carriers (electrons and holes), leaving only immobile ionised donor and acceptor atoms.
Q8(ii)1 mark · Short answerOpen: Potential barrier or barrier p.d.

Answer the following.

Potential barrier or barrier p.d.
Show answer

Answer

The potential barrier is the potential difference developed across the depletion region of a p-n junction, which opposes the further diffusion of majority charge carriers across the junction.
Q93 marks · DerivationOpen: Obtain an expression for intensity of electric field at a point in end on…

Derive the following.

Obtain an expression for intensity of electric field at a point in end on position i.e. on an axial line of an electric dipole.

Given: An electric dipole of dipole moment $p = 2ql$

To show: $E = \frac{1}{4\pi\varepsilon_0} \frac{2p}{r^3}$

Show answer

Answer

Derivation of the field on the axial line of an electric dipole.
  1. 1. Let the dipole consist of charges $+q$ and $-q$ separated by $2l$, with centre O and dipole moment $p=2ql$ directed from $-q$ to $+q$. Take a point P on the axis at distance $r$ from O, on the side of $+q$.
  2. 2. By Coulomb's law, the field at P due to $+q$ (distance $r-l$) is $E_+=\frac{1}{4\pi\varepsilon_0}\frac{q}{(r-l)^2}$, along the axis away from the dipole (along $\vec p$).
  3. 3. The field at P due to $-q$ (distance $r+l$) is $E_-=\frac{1}{4\pi\varepsilon_0}\frac{q}{(r+l)^2}$, directed towards $-q$ (opposite to $\vec p$).
  4. 4. By the superposition principle, since the two fields act along the same line, $E=E_+-E_-=\frac{q}{4\pi\varepsilon_0}\left[\frac{1}{(r-l)^2}-\frac{1}{(r+l)^2}\right]=\frac{q}{4\pi\varepsilon_0}\frac{4rl}{(r^2-l^2)^2}$.
  5. 5. For a short dipole, $l\ll r$, so $(r^2-l^2)^2\approx r^4$ and $E=\frac{1}{4\pi\varepsilon_0}\frac{4ql\,r}{r^4}=\frac{1}{4\pi\varepsilon_0}\frac{2(2ql)}{r^3}$.
  6. 6. Using $p=2ql$: $E = \frac{1}{4\pi\varepsilon_0} \frac{2p}{r^3}$, directed along the dipole moment $\vec p$.
Q10(i)3 marks · NumericalOpen: In a meter bridge circuit, resistance in the left gap is 4 Ω and an unknown…

Solve the following.

In a meter bridge circuit, resistance in the left gap is $4\,\Omega$ and an unknown resistance $R$ is in the right-hand gap as shown in Figure 2 below. The null point is found to be $40\text{ cm}$ from the left end of the wire.
Figure for this question
(a)[1.5]
Calculate the value of the unknown resistance $R$.
(b)[1.5]
What change will you make in $R$ to bring the null point to the midpoint of the wire AB?
Show answer

Answer (a)

Formula used: Metre bridge balance (l from the end of R): R/S = l/(L - l) with R = 4 ohm, L_cap = 100 cm, l_small = 40 cm, so S = 6 ohm

Given: left gap $=4\,\Omega$, $l=40\text{ cm}$, so the balancing length for $R$ is $100-40=60\text{ cm}$. At balance $\frac{4}{R}=\frac{l}{100-l}=\frac{40}{60}$, so $R=\frac{4\times60}{40}=6\,\Omega$.

Final answer: 6 ohm

Answer (b)

Formula used: Metre bridge balance (l from the end of R): R/S = l/(L - l) with R = 4 ohm, L_cap = 100 cm, l_small = 50 cm, so S = 4 ohm

For the null point at the midpoint ($l=50\text{ cm}$), $\frac{4}{R'}=\frac{50}{50}$, so $R'=4\,\Omega$. Hence $R$ must be decreased from $6\,\Omega$ to $4\,\Omega$ (by $2\,\Omega$), e.g. by connecting a resistance of $12\,\Omega$ in parallel with it.
Q10(ii)3 marks · DrawingOpen: A circuit is used to determine the internal resistance and the emf of a cell…

Solve the following.

A circuit is used to determine the internal resistance and the emf of a cell. It consists of the cell, a variable resistor, an ideal ammeter A and an ideal voltmeter V. Figure 3 shows part of the circuit with the ammeter and voltmeter missing. The variable resistor is set to be $1\cdot5\,\Omega$. When the cell converts $7\cdot2\text{ mJ}$ of energy, $5\cdot8\text{ mC}$ of charge moves completely around the circuit. The potential difference across the variable resistor is $0\cdot55\text{ V}$.
Figure 3
Figure 3
(a)[1.5]
Redraw the diagram showing the positions of the ammeter and the voltmeter.
(b)[1.5]
Calculate the emf of the cell.
Show answer

Answer (a)

Worked out by the server: every current and potential difference

PartCurrentp.d.
E10.8267 A1.24 V
R10.8267 A1.24 V
A10.8267 A0 V
V10 A1.24 V
The ammeter is connected in series with the cell and the variable resistor; the voltmeter is connected in parallel across the variable resistor only (not across the ammeter).

Answer (b)

Formula used: Work done moving a charge through a potential difference: W = q*V with W = 7.2e-3 J, q = 5.8e-3 C, so V = 1.24 V

Given: energy converted $W=7.2\text{ mJ}=7.2\times10^{-3}\text{ J}$, charge $q=5.8\text{ mC}=5.8\times10^{-3}\text{ C}$. The emf is the energy converted per unit charge: $\varepsilon=\frac{W}{q}=\frac{7.2\times10^{-3}}{5.8\times10^{-3}}=1.24\text{ V}$.

Final answer: 1.24 V

Q113 marks · DerivationOpen: Obtain an expression for magnetic flux density B at the centre of a current…

Derive the following.

Obtain an expression for magnetic flux density $B$ at the centre of a current carrying circular coil.

Given: A circular coil of radius $r$ carrying current $I$

To show: $B = \frac{\mu_0 I}{2r}$

Show answer

Answer

Derivation of the field at the centre of a circular coil.
  1. 1. Consider a circular coil of radius $r$ carrying current $I$, with centre O. Take a small current element $d\vec l$ on the coil.
  2. 2. By the Biot-Savart law, the field at O due to the element is $dB=\frac{\mu_0}{4\pi}\frac{I\,dl\sin\theta}{r^2}$.
  3. 3. Every element is tangential and so perpendicular to the radius joining it to O: $\theta=90^\circ$ and $\sin\theta=1$, giving $dB=\frac{\mu_0}{4\pi}\frac{I\,dl}{r^2}$.
  4. 4. By the right-hand grip rule, the fields of all the elements at O point the same way, perpendicular to the plane of the coil, so they add directly.
  5. 5. Integrating round the circumference: $B=\frac{\mu_0 I}{4\pi r^2}\oint dl=\frac{\mu_0 I}{4\pi r^2}(2\pi r)$.
  6. 6. Hence $B = \frac{\mu_0 I}{2r}$.
Q123 marks · DerivationOpen: Using Huygen’s wave theory, prove Snell’s law of refraction of light.

Derive the following.

Using Huygen’s wave theory, prove Snell’s law of refraction of light.

Given: A plane wavefront incident on a plane refracting surface separating two media

To show: $\frac{\sin i}{\sin r} = \frac{v_1}{v_2} = \mu$

Show answer

Answer

Proof of Snell's law using Huygens' construction.
  1. 1. Let a plane surface XY separate medium 1 (speed of light $v_1$) from medium 2 (speed $v_2$). A plane wavefront AB is incident with its ray making angle of incidence $i$ with the normal, so AB makes angle $i$ with XY.
  2. 2. Point B of the wavefront reaches the surface at C in time $t$, so $BC=v_1t$. In the same time the secondary wavelet from A travels in medium 2 a distance $AE=v_2t$.
  3. 3. The refracted wavefront is the tangent CE to the wavelet of radius $v_2t$ drawn from A, and the angle of refraction $r$ is the angle between CE and XY.
  4. 4. In right-angled triangle ABC, $\sin i=\frac{BC}{AC}=\frac{v_1t}{AC}$.
  5. 5. In right-angled triangle AEC, $\sin r=\frac{AE}{AC}=\frac{v_2t}{AC}$.
  6. 6. Dividing: $\frac{\sin i}{\sin r}=\frac{v_1}{v_2}$, which is a constant for the two media, called the refractive index $\mu$ (Snell's law): $\frac{\sin i}{\sin r} = \frac{v_1}{v_2} = \mu$.
Q13(i)3 marks · DerivationOpen: Obtain Prism formula i.e. prove that n = (sin((A + δ_m)/2))/(sin(A/2)) Where…

Derive the following.

Obtain Prism formula i.e. prove that $n = \frac{\sin\left(\frac{A + \delta_m}{2}\right)}{\sin\left(\frac{A}{2}\right)}$ Where the terms have their usual meaning.

Given: Refraction of a monochromatic ray of light through a prism of refracting angle $A$ at minimum deviation $\delta_m$

To show: $n = \frac{\sin\left(\frac{A + \delta_m}{2}\right)}{\sin\left(\frac{A}{2}\right)}$

Show answer

Answer

Derivation of the prism formula.
  1. 1. A ray PQ is incident on face AB of a prism of refracting angle $A$ at angle $i$, refracted at angle $r_1$, falls on face AC at angle $r_2$ and emerges at angle $e$, with deviation $\delta$.
  2. 2. From the geometry of the quadrilateral formed by the two normals, $r_1+r_2=A$.
  3. 3. The total deviation is $\delta=(i-r_1)+(e-r_2)=i+e-A$.
  4. 4. At minimum deviation the ray passes symmetrically through the prism (inside it parallel to the base): $i=e$ and $r_1=r_2=r$.
  5. 5. Then $A=2r$, so $r=\frac{A}{2}$, and $\delta_m=2i-A$, so $i=\frac{A+\delta_m}{2}$.
  6. 6. By Snell's law at the first face, $n=\frac{\sin i}{\sin r}$.
  7. 7. Substituting: $n = \frac{\sin\left(\frac{A + \delta_m}{2}\right)}{\sin\left(\frac{A}{2}\right)}$.
Q13(ii)3 marks · DerivationOpen: Derive Lens Maker’s formula.

Derive the following.

Derive Lens Maker’s formula.

Given: A thin convex lens bounded by spherical surfaces of radii of curvature $R_1$ and $R_2$

To show: $\frac{1}{f} = (n - 1)\left(\frac{1}{R_1} - \frac{1}{R_2}\right)$

Show answer

Answer

Derivation of the lens maker's formula.
  1. 1. Consider a thin convex lens of refractive index $n$ placed in air, with surfaces of radii of curvature $R_1$ and $R_2$, and a point object O on the principal axis at distance $u$ from the optical centre. Use the New Cartesian sign convention and the thin-lens approximation.
  2. 2. Refraction at the first surface (air to glass), forming an image $I_1$ at distance $v_1$: $\frac{n}{v_1}-\frac{1}{u}=\frac{n-1}{R_1}$.
  3. 3. $I_1$ acts as the object for the second surface (glass to air), forming the final image at distance $v$: $\frac{1}{v}-\frac{n}{v_1}=\frac{1-n}{R_2}$.
  4. 4. Adding the two equations eliminates $v_1$: $\frac{1}{v}-\frac{1}{u}=(n-1)\left(\frac{1}{R_1}-\frac{1}{R_2}\right)$.
  5. 5. For an object at infinity, $u=\infty$ and the image is formed at the focus, $v=f$, so $\frac{1}{f}=(n-1)\left(\frac{1}{R_1}-\frac{1}{R_2}\right)$.
Q14(i)2 marks · NumericalOpen: Calculate the angular width of the central maxima obtained in Fraunhofer single…

Solve the following.

Calculate the angular width of the central maxima obtained in Fraunhofer single slit diffraction experiment, when a monochromatic light of wavelength $550\text{ nm}$ falls normally on a rectangular slit of width $1\cdot1 \times 10^{-4}\text{ cm}$.
Show answer

Answer

Formula used: Single slit: angle of the nth minimum: theta = asin(n*lam/a) with a = 1.1e-6 m, n = 1, lam = 550e-9 m, so theta = 30 deg

Given: $\lambda=550\text{ nm}=5.5\times10^{-7}\text{ m}$, $a=1.1\times10^{-4}\text{ cm}=1.1\times10^{-6}\text{ m}$. The first minimum is at $\sin\theta=\frac{\lambda}{a}=\frac{5.5\times10^{-7}}{1.1\times10^{-6}}=0.5$, so $\theta=30^\circ$. Angular width of the central maximum $=2\theta=2\times30^\circ=60^\circ$ ($\approx1.05\text{ rad}$; the small-angle value $\frac{2\lambda}{a}$ would be $1\text{ rad}$).

Final answer: 60 degree

Q15(i)2 marks · GraphOpen: With reference to photoelectric effect, plot a labelled graph of stopping…

Draw the graph described below.

With reference to photoelectric effect, plot a labelled graph of stopping potential ($V_s$) versus frequency ($f$) of the incident radiation.

Draw: graph of stopping potential (Vs) versus frequency (f) of incident radiation

Show answer

Answer

What it shows: slope = h/e; intercept on the frequency axis = threshold frequency $f_0$

$V_s$ is a straight line against $f$: $eV_s=hf-hf_0$, so $V_s=\frac{h}{e}f-\frac{h}{e}f_0$. The line starts on the frequency axis at the threshold frequency $f_0$ (no emission below it) and has slope $\frac{h}{e}$, the same for all metals.
Q16(i)2 marks · Short answerOpen: State any two differences between Nuclear fusion and Nuclear fission.

Answer the following.

State any two differences between Nuclear fusion and Nuclear fission.
Show answer

Answer

1. Fission is the splitting of a heavy nucleus (e.g. $^{235}\text{U}$) into two lighter nuclei, whereas fusion is the combining of two light nuclei (e.g. hydrogen isotopes) into a heavier nucleus. 2. Fission can take place at ordinary temperatures (started by a slow neutron), whereas fusion needs a very high temperature and pressure (about $10^7$ K to $10^8$ K).
Q16(ii)1 mark · Short answerOpen: What is the essential difference between the working of a fission bomb and a…

Answer the following.

What is the essential difference between the working of a fission bomb and a nuclear reactor?
Show answer

Answer

In a fission bomb the chain reaction is uncontrolled and releases energy in a very short time, whereas in a nuclear reactor the chain reaction is controlled (by control rods and a moderator) so energy is released at a steady rate.
Q173 marks · GraphOpen: What is meant by reverse biasing of a semiconductor diode? Draw a labelled…

Draw the graph described below.

What is meant by reverse biasing of a semiconductor diode? Draw a labelled characteristic curve i.e. I - V graph for a semiconductor diode during reverse bias.

Draw: I-V characteristic curve for a semiconductor diode during reverse bias

Show answer

Answer

Reverse biasing: the p-side of the diode is connected to the negative terminal and the n-side to the positive terminal of the battery, so the external voltage acts in the same direction as the barrier potential, the depletion region widens and only a very small reverse (leakage) current of a few $\mu$A flows, due to minority carriers. This current is almost constant with voltage until the breakdown voltage is reached, when it rises sharply.
Q18(i)5 marks · NumericalOpen: An 80 Ω resistor, a 1·0 H inductor and a 40 μF capacitor are connected in…

Solve the following.

An $80\,\Omega$ resistor, a $1\cdot0\text{ H}$ inductor and a $40\,\mu\text{F}$ capacitor are connected in series to an a.c. supply of $220\text{ V}$ such that the circuit draws the maximum current. At this stage, calculate:
(a)[1]
Resonant frequency of the circuit.
(b)[1]
Capacitive reactance of the circuit.
(c)[1]
Impedance of the circuit
(d)[1]
Current flowing through the circuit.
(e)[1]
Phase difference between capacitive and inductive voltages.
Show answer

Answer (a)

Formula used: Resonant frequency: f0 = 1/(2*pi*sqrt(L*C)) with C = 40 uF, L = 1.0 H, so f0 = 25.2 Hz

At maximum current the circuit is at resonance: $f_0=\frac{1}{2\pi\sqrt{LC}}=\frac{1}{2\pi\sqrt{1.0\times40\times10^{-6}}}=25.2\text{ Hz}$.

Final answer: 25.2 Hz

Answer (b)

Formula used: Capacitive reactance: XC = 1/(2*pi*f*C) with C = 40 uF, f = 25.1646 Hz, so XC = 158 ohm

$X_C=\frac{1}{2\pi f_0C}=\frac{1}{2\pi\times25.16\times40\times10^{-6}}\approx158\,\Omega$ (equal to $X_L$ at resonance).

Final answer: 158 ohm

Answer (c)

At resonance $X_L=X_C$, so $Z=\sqrt{R^2+(X_L-X_C)^2}=R=80\,\Omega$.

Final answer: 80 ohm

Answer (d)

Formula used: Ohm's law: V = I*R with R = 80 ohm, V = 220 V, so I = 2.75 A

$I=\frac{V}{Z}=\frac{220}{80}=2.75\text{ A}$.

Final answer: 2.75 A

Answer (e)

The voltage across the inductor leads the current by $90^\circ$ and the voltage across the capacitor lags it by $90^\circ$, so the phase difference between them is $180^\circ$ ($\pi$ rad).

Final answer: 180 degree

Q18(ii)5 marks · NumericalOpen: Figure 4 below shows two thick metallic rails CD and GH kept parallel to each…

Solve the following.

Figure 4 below shows two thick metallic rails CD and GH kept parallel to each other $0\cdot8\text{ m}$ apart. They are joined to each other by a resistance wire R having a resistance of $5\,\Omega$. A thick metallic rod PQ rests on the rails. There is a uniform magnetic field $B = 0\cdot2\text{ T}$, which is perpendicular to the plane of the rails, pointing into the paper.
Figure for this question
(a)[2.5]
Calculate magnitude and direction of the current induced in the rod PQ if it is moved towards right with a constant velocity $v = 36\text{ km/hr}$.
(b)[2.5]
The rod PQ is now made to perform simple harmonic motion with a frequency of $3\text{ Hz}$ and an amplitude of $4\text{ cm}$. Calculate the maximum value of the emf induced in the rod.
Show answer

Answer (a)

Formulas used: Emf across a rod moving through a field: emf = B*l*v with B = 0.2 T, l = 0.8 m, v = 10 m s^-1, so emf = 1.6 V Ohm's law: V = I*R with R = 5 ohm, V = 1.6 V, so I = 0.32 A

Given: $B=0.2\text{ T}$, $l=0.8\text{ m}$, $v=36\text{ km h}^{-1}=10\text{ m s}^{-1}$, $R=5\,\Omega$. Induced emf $\varepsilon=Blv=0.2\times0.8\times10=1.6\text{ V}$; current $I=\frac{\varepsilon}{R}=\frac{1.6}{5}=0.32\text{ A}$. Direction: by Fleming's right-hand rule (or Lenz's law, as the enclosed flux into the paper increases) the induced current flows from Q to P in the rod, and then round the loop P to D, through R to G and back to Q, i.e. anticlockwise.

Final answer: 0.32 A

Answer (b)

Formula used: Emf across a rod moving through a field: emf = B*l*v with B = 0.2 T, l = 0.8 m, v = 0.754 m s^-1, so emf = 0.121 V

For SHM $x=a\sin\omega t$, the maximum speed is $v_{max}=a\omega=a\times2\pi f=0.04\times2\pi\times3=0.754\text{ m s}^{-1}$. Maximum emf $\varepsilon_{max}=Blv_{max}=0.2\times0.8\times0.754=0.121\text{ V}$.

Final answer: 0.121 V

Q19(i)5 marks · DerivationOpen: Using Bohr’s theory of hydrogen atom, obtain an expression for the radius of…

Answer the following.

(a)[3]
Using Bohr’s theory of hydrogen atom, obtain an expression for the radius of the $n^{\text{th}}$ orbit of an electron in an atom.
(b)[2]
Draw a labelled graph of binding energy of a nucleus per nucleon versus its mass number. Mark the region where nuclei are relatively more stable.

Draw: graph of binding energy of a nucleus per nucleon versus its mass number

Show answer

Answer (a)

Derivation of the radius of the $n^{th}$ Bohr orbit.
  1. 1. Consider an electron of mass $m$ and charge $e$ moving in a circular orbit of radius $r_n$ with speed $v$ round a nucleus of charge $+Ze$.
  2. 2. The electrostatic force provides the centripetal force: $\frac{mv^2}{r_n}=\frac{1}{4\pi\varepsilon_0}\frac{Ze^2}{r_n^2}$, so $mv^2r_n=\frac{Ze^2}{4\pi\varepsilon_0}$.
  3. 3. By Bohr's quantisation condition, the angular momentum is $mvr_n=\frac{nh}{2\pi}$, so $v=\frac{nh}{2\pi mr_n}$.
  4. 4. Substituting $v$ in step 2: $m\,r_n\frac{n^2h^2}{4\pi^2m^2r_n^2}=\frac{Ze^2}{4\pi\varepsilon_0}$, i.e. $\frac{n^2h^2}{4\pi^2mr_n}=\frac{Ze^2}{4\pi\varepsilon_0}$.
  5. 5. Hence $r_n=\frac{\varepsilon_0n^2h^2}{\pi mZe^2}$, so $r_n\propto n^2$ (for hydrogen, $Z=1$, $r_1=0.53\text{ \AA}$).

Answer (b)

Binding energy per nucleon rises steeply for light nuclei, reaches a broad maximum of about $8.8\text{ MeV}$ near $A\approx56$ (iron), then falls slowly to about $7.6\text{ MeV}$ for heavy nuclei like uranium. The nuclei in the flat region of the maximum (about $A=30$ to $A=120$, centred on $A\approx56$) are relatively the most stable.
Q19(ii)5 marks · Short answerOpen: State the postulate of Bohr’s theory regarding: (1) Quantisation of angular…

Answer the following.

(a)[2.5]
State the postulate of Bohr’s theory regarding: (1) Quantisation of angular momentum of an electron. (2) Emission of energy by an atom.
(b)[2.5]
What is meant by the following terms? (1) Mass defect of a nucleus. (2) Binding energy of a nucleus. State how these two are related to each other.
Show answer

Answer (a)

(1) Quantisation of angular momentum: the electron revolves only in those orbits for which its angular momentum is an integral multiple of $\frac{h}{2\pi}$, i.e. $mvr=\frac{nh}{2\pi}$ (n = 1, 2, 3, ...). (2) Emission of energy: an atom emits a photon when an electron jumps from a higher orbit (energy $E_i$) to a lower orbit (energy $E_f$), with $hf=E_i-E_f$.

Answer (b)

(1) Mass defect is the difference between the sum of the masses of the individual nucleons and the actual mass of the nucleus: $\Delta m=[Zm_p+(A-Z)m_n]-M$. (2) Binding energy is the energy required to separate the nucleus into its constituent nucleons (the energy released when they combine). Relation: the binding energy is the energy equivalent of the mass defect, $BE=\Delta m\,c^2$.
Q205 marks · Case basedOpen: Optical instruments are of great utility. They help us in studying very tiny…

Answer the following.

Optical instruments are of great utility. They help us in studying very tiny objects as well as very large heavenly bodies. Scientists have developed microscopes like electron microscopes which aid in studying tiny molecules of matter. They have also devised giant telescopes like Hubble telescope and James Web Space telescope which have enabled us to view distant galaxies hitherto unknown.
(i)[1]
Which optical instrument is used to study detailed structure of a virus?
(ii)[1]
What is the ability of an instrument to form an enlarged image of an object called?
(iii)[1]
Hubble telescope orbits around the earth like a satellite. What is the advantage of such a telescope over a similar one on earth’s surface?
(iv)[2]
An astronomical telescope consists of two convex lenses having focal length of $200\text{ cm}$ and $4\text{ cm}$. When it forms final image at infinity, calculate its: (a) Magnifying power (b) Length.
Show answer

Answer (i)

An electron microscope.

Answer (ii)

Magnifying power (magnification) of the instrument.

Answer (iii)

Being above the earth's atmosphere, it is free from atmospheric absorption and distortion (blurring), so it gives much clearer images and can detect radiation the atmosphere blocks.

Answer (iv)

Formulas used: Astronomical telescope in normal adjustment: m = fo/fe with fe = 4 cm, fo = 200 cm, so m = 50 Astronomical telescope in normal adjustment: m = fo/fe with fe = 4 cm, fo = 200 cm, so L = 204 cm

Given: $f_o=200\text{ cm}$, $f_e=4\text{ cm}$, final image at infinity (normal adjustment). (a) Magnifying power $m=\frac{f_o}{f_e}=\frac{200}{4}=50$. (b) Length of the telescope $L=f_o+f_e=200+4=204\text{ cm}$.

Final answer: m = 50, L = 204 cm

About this specimen paper

The ISC Physics 2023 Specimen Paper is a specimen paper for Class 12: 45 questions in printed order, 70 marks in all, asked from 14 chapters. A specimen paper is the sample question paper CISCE publishes before the exam to show the layout and style of that year’s paper. It is a good guide to the pattern you will meet.

The layout of the current Physics paper (sections, marks, choices) is in the paper pattern guide.

By section

SectionQuestionsMarks printed*
A1414
B1218
C1433
D525

By kind of question

KindQuestionsMarks printed*
Short answer1925
Numerical721
Derivation620
MCQ77
Drawing37
Graph25
Case based15

By chapter

ChapterQuestionsMarks printed*
Ray Optics and Optical Instruments514
Current Electricity610
Atoms210
Wave Optics69
Moving charges and magnetism48
Electromagnetic Induction27
Alternating Current26
Electrostatic Potential, Potential Energy and Capacitance35
Semiconductor diode35
Dual Nature of Radiation and Matter34
Nuclei34
Electric Charges and Fields24
Electromagnetic Waves22
Semiconductor Electronics: Materials, Devices and Simple Circuits22

* Marks are those printed on each question; where a question offers an either-or choice, both options are counted, so the totals can come to more than the paper’s own total.

Common questions

How many questions are in the ISC Physics 2023 Specimen Paper?

45 questions, 70 marks in all, shown in full and in printed order on this page.

Which chapters does the ISC Physics 2023 Specimen Paper ask most about?

By number of questions: Current Electricity (6), Wave Optics (6), Ray Optics and Optical Instruments (5) and Moving charges and magnetism (4).

Does this page have the answers to the ISC Physics 2023 Specimen Paper?

Tap “Show answer” under a question to see its answer. The download button saves the paper as a PDF, with or without the answers.