Prashnikaप्रश्निका
Code
About
PhysicsBoardClass 12

ISC Physics 2023 Question Paper with Answers

The ISC Physics 2023 Question Paper for Class 12: all 43 questions, 70 marks in all, in printed order and in full. It is free to download: tap "Show answer" under a question to see its answer, or use the download button to save the questions as a PDF, with or without answers; "Print this paper" below prints it as it was set.

43questions
70marks
14chapters
Q1(A)(i)1 mark · MCQOpen: A hollow sphere of radius R has a point charge Q at its centre. Electric flux…

Choose the correct option.

A hollow sphere of radius $R$ has a point charge $Q$ at its centre. Electric flux emanating from it is $\phi$. If both the charge and the radius of the sphere be doubled, electric flux emanating from the sphere will:
  • (a)remain the same.
  • (b)become $2\phi$
  • (c)become $4\phi$
  • (d)become $8\phi$
Show answer

Answer

Correct option: (b)

Answer: (b) become $2\phi$ By Gauss's law $\phi = Q/\epsilon_0$, which does not depend on the radius, so doubling $Q$ doubles the flux.
Q1(A)(ii)1 mark · MCQOpen: An electric current (I) flowing through a metallic wire is gradually increased…

Choose the correct option.

An electric current ($I$) flowing through a metallic wire is gradually increased. The graph of heating power ($P$) developed in it versus the current ($I$) is:
  • (a)(a)
  • (b)(b)
  • (c)(c)
  • (d)(d)
Figure for this question
Show answer

Answer

Correct option: (c)

Answer: (c) the graph in (c), a curve rising from the origin with increasing slope $P = I^2R$, so $P \propto I^2$: the graph is a parabola through the origin.
Q1(A)(iii)1 mark · MCQOpen: A circular coil has radius 'r', number of turns 'N' and carries a current 'I'…

Choose the correct option.

A circular coil has radius '$r$', number of turns '$N$' and carries a current '$I$'. Magnetic flux density '$B$' at its centre is:
  • (a)$B = \mu_0 NI$
  • (b)$B = \mu_0 NI / 2r$
  • (c)$B = \mu_0 NI / 4\pi r$
  • (d)$B = \mu_0 NI / 4r$
Show answer

Answer

Correct option: (b)

Answer: (b) $B = \mu_0 NI / 2r$ The field at the centre of a circular coil of $N$ turns is $B = \mu_0 NI/2r$.
Q1(A)(iv)1 mark · MCQOpen: If an object is placed at a distance of 10 cm in front of a concave mirror of…

Choose the correct option.

If an object is placed at a distance of $10\text{ cm}$ in front of a concave mirror of focal length $20\text{ cm}$, the image formed will be:
  • (a)real and $20\text{ cm}$ in front of the mirror.
  • (b)real and $6\cdot67\text{ cm}$ in front of the mirror.
  • (c)virtual and $20\text{ cm}$ behind the mirror.
  • (d)virtual and $6\cdot67\text{ cm}$ behind the mirror.
Show answer

Answer

Correct option: (c)

Answer: (c) virtual and $20\text{ cm}$ behind the mirror. With $u = -10\text{ cm}$ and $f = -20\text{ cm}$, $v = +20\text{ cm}$; the positive sign means the image is virtual and behind the mirror (object lies between the pole and the focus).
Q1(A)(v)1 mark · MCQOpen: What type of wavefronts are associated with a source at infinity?

Choose the correct option.

What type of wavefronts are associated with a source at infinity?
  • (a)Cylindrical wavefronts
  • (b)Plane wavefronts
  • (c)Spherical wavefronts
  • (d)All types of wavefronts
Show answer

Answer

Correct option: (b)

Answer: (b) Plane wavefronts A source at infinity is very far away, so a small portion of its spherical wavefront appears plane.
Q1(A)(vi)1 mark · MCQOpen: Matter waves are:

Choose the correct option.

Matter waves are:
  • (a)waves associated with moving particles.
  • (b)waves associated with stationary particles.
  • (c)waves associated with any charged particles.
  • (d)waves associated with electrons only.
Show answer

Answer

Correct option: (a)

Answer: (a) waves associated with moving particles. A moving particle of momentum $p$ has an associated wavelength $\lambda = h/p$; a stationary particle has $p = 0$.
Q1(A)(vii)1 mark · MCQOpen: With an increase in the temperature, electrical conductivity of a semiconductor:

Choose the correct option.

With an increase in the temperature, electrical conductivity of a semiconductor:
  • (a)decreases.
  • (b)increases.
  • (c)does not change.
  • (d)first increases and then decreases.
Show answer

Answer

Correct option: (b)

Answer: (b) increases. On heating, more electrons move from the valence band to the conduction band, so the number of charge carriers increases and conductivity rises.
Q1(B)(i)1 mark · Short answerOpen: What is meant by an equipotential surface?

Answer the following.

What is meant by an equipotential surface?
Show answer

Answer

An equipotential surface is a surface on which the electric potential has the same value at every point.
Q1(B)(ii)1 mark · Short answerOpen: In case of metals, what is the relation between current density (J), electrical…

Answer the following.

In case of metals, what is the relation between current density ($J$), electrical conductivity ($\sigma$) and electric field intensity ($E$)?
Show answer

Answer

$\vec{J} = \sigma \vec{E}$, that is, the current density is directly proportional to the electric field, with the electrical conductivity $\sigma$ as the constant of proportionality.
Q1(B)(iii)1 mark · Short answerOpen: What is meant by “Motional emf”?

Answer the following.

What is meant by “Motional emf”?
Show answer

Answer

Motional emf is the emf induced across the ends of a conductor because of its motion in a magnetic field ($\epsilon = Blv$ for a rod moving perpendicular to the field).
Q1(B)(iv)1 mark · Short answerOpen: What is meant by a microscope in normal use?

Answer the following.

What is meant by a microscope in normal use?
Show answer

Answer

A microscope is in normal use when the final image is formed at the least distance of distinct vision (near point, $D = 25\text{ cm}$) from the eye.
Q1(B)(v)1 mark · Short answerOpen: In a single slit Fraunhofer diffraction experiment, how does the angular width…

Answer the following.

In a single slit Fraunhofer diffraction experiment, how does the angular width of central maximum change when the slit width is increased?
Show answer

Answer

The angular width of the central maximum, $2\theta = 2\lambda/a$, decreases when the slit width $a$ is increased (it is inversely proportional to $a$).
Q2(i)2 marks · NumericalOpen: Calculate equivalent capacitance of the circuit shown in Figure 1 given below:

Solve the following.

Calculate equivalent capacitance of the circuit shown in Figure 1 given below:
Figure 1
Figure 1
Show answer

Answer

Formulas used: Capacitors in parallel: C = C1 + C2 + C3 with C1 = 50 uF, C2 = 50 uF, so C = 100 uF Two capacitors in series: 1/C = 1/C1 + 1/C2 with C1 = 100 uF, C2 = 25 uF, so C = 20 uF

Given: $C_1 = C_2 = 50\ \mu\text{F}$ in parallel, in series with $C_3 = 25\ \mu\text{F}$. $C_p = C_1 + C_2 = 50 + 50 = 100\ \mu\text{F}$ $\dfrac{1}{C_{eq}} = \dfrac{1}{C_p} + \dfrac{1}{C_3} = \dfrac{1}{100} + \dfrac{1}{25}$, so $C_{eq} = 20\ \mu\text{F}$

Final answer: 20 μF

Q2(ii)2 marks · NumericalOpen: Calculate electric potential at a point P which is at a distance of 9 cm from a…

Solve the following.

Calculate electric potential at a point P which is at a distance of $9\text{ cm}$ from a point charge of $50\mu\text{C}$.
Show answer

Answer

Formula used: Potential of a point charge: V = k*q/(K*r) with k = 9e9 N m^2 C^-2, q = 50 uC, r = 9 cm, so V = 5e6 V

Given: $q = 50\ \mu\text{C} = 50\times10^{-6}\text{ C}$, $r = 9\text{ cm} = 0.09\text{ m}$, $k = 9\times10^{9}\text{ N m}^2\text{ C}^{-2}$. $V = \dfrac{kq}{r} = \dfrac{9\times10^{9}\times 50\times10^{-6}}{0.09}$

Final answer: 5e6 V

Q3(i)1 mark · Short answerOpen: Write balancing condition of a Wheatstone bridge.

Answer the following.

Write balancing condition of a Wheatstone bridge.
Show answer

Answer

Formula used: Balanced Wheatstone bridge: P/Q = R/S with P = 10 ohm, Q = 20 ohm, R = 30 ohm, so S = 60 ohm

A Wheatstone bridge is balanced (no current through the galvanometer) when $\dfrac{P}{Q} = \dfrac{R}{S}$, that is, the ratio of resistances in the two arms on one side equals that on the other side.
Q42 marks · Short answerOpen: When an electric current is passed through a wire or a coil, a magnetic field…

Answer the following.

When an electric current is passed through a wire or a coil, a magnetic field is produced. Is the reverse phenomenon possible i.e., can a magnetic field produce an electric current? Explain with the help of an appropriate example.
Show answer

Answer

Yes, a changing magnetic field can produce an electric current; this is electromagnetic induction. Example: when a bar magnet is moved towards or away from a coil connected to a galvanometer, the magnetic flux linked with the coil changes, an emf is induced and the galvanometer deflects; the deflection stops when the magnet is at rest.
Q5(i)2 marks · NumericalOpen: A long straight wire AB carries a current of 5 A. P is a proton travelling with…

Solve the following.

A long straight wire AB carries a current of $5\text{ A}$. P is a proton travelling with a velocity of $2 \times 10^6\text{ m/s}$, parallel to the wire, $0\cdot2\text{ m}$ from it and in a direction opposite to the current, as shown in Figure 2 below. Calculate the force which magnetic field of the current carrying conductor AB exerts on the proton.
Figure 2
Figure 2
Show answer

Answer

Formulas used: Field of a long straight wire: B = mu0*I/(2*pi*r) with I = 5 A, r = 0.2 m, mu0 = 1.2566e-6 T m/A, so B = 5e-6 T Magnetic force on a moving charge: F = q*v*B*sin(theta) with B = 5e-6 T, q = 1.6e-19 C, v = 2e6 m/s, theta = 90 deg, so F = 1.6e-18 N

Given: $I = 5\text{ A}$, $v = 2\times10^{6}\text{ m s}^{-1}$, $r = 0.2\text{ m}$, $q = 1.6\times10^{-19}\text{ C}$. $B = \dfrac{\mu_0 I}{2\pi r} = \dfrac{4\pi\times10^{-7}\times5}{2\pi\times0.2} = 5\times10^{-6}\text{ T}$ $F = qvB\sin 90^\circ = 1.6\times10^{-19}\times2\times10^{6}\times5\times10^{-6} = 1.6\times10^{-18}\text{ N}$ The field at P is into the plane of the paper, so the force is perpendicular to the wire, directed away from it (repulsion).

Final answer: 1.6e-18 N

Q5(ii)2 marks · NumericalOpen: A moving coil galvanometer of resistance 55 Ω produces a full scale deflection…

Solve the following.

A moving coil galvanometer of resistance $55\,\Omega$ produces a full scale deflection for a current of $250\text{ mA}$. How will you convert it into an ammeter having a range of $0 - 3\text{ A}$?
Show answer

Answer

Formula used: Shunt to turn a galvanometer into an ammeter: S = Ig*G/(I - Ig) with G = 55 ohm, I = 3 A, Ig = 0.25 A, so S = 5 ohm

Connect a low resistance (shunt) $S$ in parallel with the galvanometer. Given: $G = 55\ \Omega$, $I_g = 250\text{ mA} = 0.25\text{ A}$, $I = 3\text{ A}$. $S = \dfrac{I_g G}{I - I_g} = \dfrac{0.25\times55}{3 - 0.25} = 5\ \Omega$

Final answer: 5 ohm

Q6(i)1 mark · Short answerOpen: State how vectors E⃗, B⃗ and c⃗ are oriented in an electromagnetic wave.

Answer the following.

State how vectors $\vec{E}$, $\vec{B}$ and $\vec{c}$ are oriented in an electromagnetic wave.
Show answer

Answer

$\vec{E}$, $\vec{B}$ and the direction of propagation $\vec{c}$ are mutually perpendicular: $\vec{E}$ and $\vec{B}$ are perpendicular to each other and both are perpendicular to $\vec{c}$, which is along $\vec{E}\times\vec{B}$.
Q8(i)1 mark · Short answerOpen: What is meant by “Forbidden band” of energy levels?

Answer the following.

What is meant by “Forbidden band” of energy levels?
Show answer

Answer

The forbidden band (energy gap, $E_g$) is the range of energies between the top of the valence band and the bottom of the conduction band in which no electron can have an energy.
Q93 marks · DerivationOpen: Show that intensity of electric field at a point in broadside position of an…

Derive the following.

Show that intensity of electric field at a point in broadside position of an electric dipole is given by: $E = \left(\frac{1}{4\pi\epsilon_0}\right) \frac{p}{(r^2 + l^2)^{3/2}}$ where the terms have their usual meaning.

To show: $E = \left(\frac{1}{4\pi\epsilon_0}\right) \frac{p}{(r^2 + l^2)^{3/2}}$

Show answer

Answer

Let the dipole have charges $+q$ and $-q$ separated by $2l$, with dipole moment $p = 2ql$. Let P be a point on the equatorial (broadside) line at distance $r$ from the centre O of the dipole.
  1. Each charge is at distance $\sqrt{r^2 + l^2}$ from P, so by Coulomb's law the magnitude of the field due to each is $E_+ = E_- = \dfrac{1}{4\pi\epsilon_0}\dfrac{q}{r^2 + l^2}$.
  2. $E_+$ acts along the line from $+q$ to P and $E_-$ along the line from P to $-q$; each makes an angle $\theta$ with the equatorial line, where $\cos\theta = \dfrac{l}{\sqrt{r^2 + l^2}}$.
  3. Resolve each field: the components perpendicular to the dipole axis are equal and opposite, so they cancel (principle of superposition).
  4. The components parallel to the axis are in the same direction (parallel to $-\vec p$) and add: $E = E_+\cos\theta + E_-\cos\theta = 2E_+\cos\theta$.
  5. $E = 2\cdot\dfrac{1}{4\pi\epsilon_0}\dfrac{q}{r^2 + l^2}\cdot\dfrac{l}{\sqrt{r^2 + l^2}} = \dfrac{1}{4\pi\epsilon_0}\dfrac{2ql}{(r^2 + l^2)^{3/2}}$.
  6. Since $p = 2ql$: $E = \left(\dfrac{1}{4\pi\epsilon_0}\right)\dfrac{p}{(r^2 + l^2)^{3/2}}$, directed opposite to $\vec p$.
Q10(i)3 marks · NumericalOpen: Eight identical cells, each of emf 2 V and internal resistance 3 Ω, are…

Solve the following.

Eight identical cells, each of emf $2\text{ V}$ and internal resistance $3\,\Omega$, are connected in series to form a row. Six such rows are connected in parallel to form a battery. This battery is now connected to an external resistor R of resistance $6\,\Omega$. Calculate:
(a)[1]
emf of the battery.
(b)[1]
internal resistance of the battery.
(c)[1]
current flowing through R.
Show answer

Answer (a)

Emf of the battery equals the emf of one row of 8 cells in series: $E = nE_0 = 8\times2 = 16\text{ V}$.

Final answer: 16 V

Answer (b)

Internal resistance of one row $= 8\times3 = 24\ \Omega$; six such rows in parallel give $r = \dfrac{24}{6} = 4\ \Omega$.

Final answer: 4 ohm

Answer (c)

Formula used: A cell of emf E and internal resistance r with external R (V is the terminal p.d.): E = I*(R + r) with E = 16 V, R_cap = 6 ohm, r_small = 4 ohm, so I = 1.6 A

$I = \dfrac{E}{R + r} = \dfrac{16}{6 + 4} = 1.6\text{ A}$

Final answer: 1.6 A

Q10(ii)3 marks · NumericalOpen: In the circuit shown in Figure 3 below, E₁ and E₂ are batteries having emfs of…

Solve the following.

In the circuit shown in Figure 3 below, $E_1$ and $E_2$ are batteries having emfs of $25\text{ V}$ and $26\text{ V}$. They have an internal resistance of $1\,\Omega$ and $5\,\Omega$ respectively. Applying Kirchhoff’s laws of electrical networks, calculate the currents $I_1$ and $I_2$.
Figure 3
Figure 3
Show answer

Answer

Applying Kirchhoff's loop rule (with the currents marked in the figure; at B the current $I_1 + I_2$ passes through the $2\ \Omega$ resistor): Loop HJBCDEGH: $25 - 1\times I_1 - 4I_1 - 2(I_1 + I_2) = 0$, so $7I_1 + 2I_2 = 25$ ... (1) Loop ABCDEFA: $26 - 5I_2 - 3I_2 - 2(I_1 + I_2) = 0$, so $2I_1 + 10I_2 = 26$, i.e. $I_1 + 5I_2 = 13$ ... (2) From (2), $I_1 = 13 - 5I_2$. Putting in (1): $91 - 35I_2 + 2I_2 = 25$, so $I_2 = 2\text{ A}$ and $I_1 = 3\text{ A}$.

Final answer: $I_1 = 3\text{ A}$, $I_2 = 2\text{ A}$ A

Q113 marks · DerivationOpen: Using Ampere’s circuital law, obtain an expression for magnetic flux density…

Derive the following.

Using Ampere’s circuital law, obtain an expression for magnetic flux density ‘$B$’ at a point near an infinitely long and straight conductor, carrying a current $I$.
Show answer

Answer

Magnetic flux density near a long straight current-carrying conductor by Ampere's circuital law.
  1. Consider a long straight conductor carrying a current $I$. By symmetry, $B$ has the same magnitude at every point at distance $r$ from the wire, and its direction is tangential to a circle of radius $r$ about the wire (right-hand rule).
  2. Choose a circular Amperian loop of radius $r$ in a plane perpendicular to the wire, with the wire through its centre.
  3. At every point of the loop $\vec B$ is parallel to $d\vec l$ and constant in magnitude, so $\oint \vec B\cdot d\vec l = B\oint dl = B(2\pi r)$.
  4. By Ampere's circuital law, $\oint \vec B\cdot d\vec l = \mu_0 I$, where $I$ is the current enclosed by the loop.
  5. Hence $B(2\pi r) = \mu_0 I$.
  6. $B = \dfrac{\mu_0 I}{2\pi r}$
Q123 marks · DerivationOpen: Using Huygen’s wave theory of light, show that the angle of incidence is equal…

Derive the following.

Using Huygen’s wave theory of light, show that the angle of incidence is equal to the angle of reflection. Draw a neat and labelled diagram.
Show answer

Answer

Consider a plane wavefront AB incident obliquely on a plane reflecting surface. The end A of the wavefront touches the surface first; the disturbance at B has still to travel the distance BC to reach the surface at C. If this takes time $t$, then $BC = vt$, where $v$ is the speed of light in the medium. Diagram (drawn): incident wavefront AB, reflected wavefront CE, the reflecting surface, the wavelet from A as a semicircle of radius AE touching CE at E, with angles $i$ and $r$ marked.
  1. The plane wavefront AB meets the reflecting surface first at A; the disturbance from B reaches the surface at C after time $t$, so $BC = vt$.
  2. By Huygens' principle, in the same time $t$ the secondary wavelet from A spreads as a hemisphere of radius $AE = vt$ in the same medium.
  3. The tangent drawn from C to this wavelet touches it at E; CE is the reflected wavefront.
  4. Angle of incidence $i = \angle BAC$ and angle of reflection $r = \angle ECA$ (each wavefront makes the same angle with the surface as its ray makes with the normal).
  5. In triangles ABC and CEA: $\angle ABC = \angle CEA = 90^\circ$ (a wavefront is perpendicular to its ray), AC is common and $BC = AE = vt$.
  6. So the triangles are congruent (RHS), hence $\angle BAC = \angle ECA$, i.e. $i = r$: the angle of incidence equals the angle of reflection.
Q13(i)3 marks · DerivationOpen: For any prism, obtain a relation between angle of the prism (A), angle of…

Derive the following.

For any prism, obtain a relation between angle of the prism ($A$), angle of minimum deviation ($\delta_m$) and refractive index of its material ($\mu$ or $n$).
Show answer

Answer

Relation between the angle of the prism, the angle of minimum deviation and the refractive index.
  1. A ray PQ is incident on face AB of a prism of angle $A$ at angle $i$, refracts at angle $r_1$, strikes face AC at angle $r_2$ inside the prism and emerges at angle $e$. The angle of deviation is $\delta = (i - r_1) + (e - r_2) = i + e - A$.
  2. From the geometry of the quadrilateral formed by the two normals and the faces, $r_1 + r_2 = A$.
  3. At minimum deviation the ray passes symmetrically through the prism (parallel to the base), so $i = e$ and $r_1 = r_2 = r$.
  4. Then $A = r_1 + r_2 = 2r$, so $r = \dfrac{A}{2}$.
  5. Also $\delta_m = i + e - A = 2i - A$, so $i = \dfrac{A + \delta_m}{2}$.
  6. By Snell's law, $n = \dfrac{\sin i}{\sin r}$, therefore $n = \dfrac{\sin\left(\dfrac{A + \delta_m}{2}\right)}{\sin\left(\dfrac{A}{2}\right)}$.
Q13(ii)3 marks · DerivationOpen: Obtain an expression for refraction at a single convex spherical surface i.e…

Derive the following.

Obtain an expression for refraction at a single convex spherical surface i.e., the relation between $\mu_1$ (rarer medium), $\mu_2$ (denser medium), object distance $u$, image distance $v$ and the radius of curvature $R$.
Show answer

Answer

Refraction at a single convex spherical surface separating a rarer medium of refractive index $\mu_1$ from a denser medium of refractive index $\mu_2$. Let P be the pole, C the centre of curvature, O a point object on the principal axis and I its image. Take all angles small (paraxial rays) and use the New Cartesian sign convention.
  1. Let a ray OM from O strike the surface at M and refract along MI. Draw the normal CM. Let the angle of incidence be $i$, the angle of refraction $r$, and let $\angle MOP = \alpha$, $\angle MCP = \gamma$, $\angle MIP = \beta$. Let MN be the perpendicular from M on the axis, of length $h$.
  2. In triangle OMC, the exterior angle gives $i = \alpha + \gamma$.
  3. In triangle MCI, the exterior angle gives $\gamma = r + \beta$, so $r = \gamma - \beta$.
  4. By Snell's law for small angles, $\mu_1 i = \mu_2 r$, so $\mu_1(\alpha + \gamma) = \mu_2(\gamma - \beta)$.
  5. For paraxial rays, N is very close to P, so $\alpha \approx \dfrac{h}{PO}$, $\beta \approx \dfrac{h}{PI}$ and $\gamma \approx \dfrac{h}{PC}$.
  6. With the New Cartesian convention, $PO = -u$, $PI = +v$ and $PC = +R$. Substituting, $\mu_1\left(\dfrac{h}{-u} + \dfrac{h}{R}\right) = \mu_2\left(\dfrac{h}{R} - \dfrac{h}{v}\right)$.
  7. Dividing by $h$ and rearranging: $\dfrac{\mu_2}{v} - \dfrac{\mu_1}{u} = \dfrac{\mu_2 - \mu_1}{R}$.
Q14(ii)2 marks · NumericalOpen: In Young’s double slit experiment, the distance of the 4^(th) bright fringe…

Answer the following.

In Young’s double slit experiment, the distance of the $4^{\text{th}}$ bright fringe from the centre of the interference pattern is $1\cdot5\text{ mm}$. The distance between the slits and the screen is $1\cdot5\text{ m}$ and the wavelength of light used is $500\text{ nm}$. Calculate the distance between the two slits.
Show answer

Answer

Formula used: Young's double slit: the nth bright fringe from the centre: y = n*lam*D/d with n = 4, y = 1.5 mm, lam = 500 nm, D_cap = 1.5 m, so d_small = 2e-3 m

Given: $n = 4$, $y_4 = 1.5\text{ mm} = 1.5\times10^{-3}\text{ m}$, $D = 1.5\text{ m}$, $\lambda = 500\text{ nm} = 5\times10^{-7}\text{ m}$. $y_n = \dfrac{n\lambda D}{d}$, so $d = \dfrac{n\lambda D}{y_n} = \dfrac{4\times5\times10^{-7}\times1.5}{1.5\times10^{-3}} = 2\times10^{-3}\text{ m}$

Final answer: $2\times10^{-3}$ m

Q153 marks · NumericalOpen: Monochromatic light of wavelength 396 nm is incident on the surface of a metal…

Solve the following.

Monochromatic light of wavelength $396\text{ nm}$ is incident on the surface of a metal whose work function is $1\cdot125\text{ eV}$. Calculate:
(i)[1.5]
the energy of an incident photon in $\text{eV}$.
(ii)[1.5]
the maximum kinetic energy of photoelectrons in $\text{eV}$.
Show answer

Answer (i)

$E = \dfrac{hc}{\lambda} = \dfrac{6.63\times10^{-34}\times3\times10^{8}}{396\times10^{-9}\times1.6\times10^{-19}} = 3.14\text{ eV}$

Final answer: 3.14 eV

Answer (ii)

By Einstein's photoelectric equation, $K_{max} = E - W_0 = 3.14 - 1.125 = 2.01\text{ eV}$

Final answer: 2.01 eV

Q163 marks · Short answerOpen: Name any two essential parts of a nuclear reactor. State the function of any…

Answer the following.

Name any two essential parts of a nuclear reactor. State the function of any one of them.
Show answer

Answer

Essential parts (any two): 1. Moderator (heavy water, graphite) 2. Control rods (cadmium, boron) Function of the moderator: it slows down the fast neutrons produced in fission to thermal energies, so that they can cause further fission of $^{235}\text{U}$. (Function of control rods: they absorb excess neutrons and so control the rate of the chain reaction.)
Q173 marks · DrawingOpen: Draw a labelled circuit diagram of a full wave rectifier. Show graphically how…

Draw the following.

Draw a labelled circuit diagram of a full wave rectifier. Show graphically how the output voltage varies with time.

Draw: labelled circuit diagram of a full wave rectifier and graph of output voltage varying with time

Must show: centre-tapped secondary of transformer, two diodes D1 and D2, load resistor RL, graph showing pulsating dc output voltage with time

Show answer

Answer

Worked out by the server: A full-wave rectifier with a centre-tapped transformer: D1 conducts in one half-cycle and D2 in the other, so the current through the load is always the same way and the output frequency is twice the input's.

Circuit: the primary of a transformer is connected to the ac source. The secondary has a centre tap (O). The ends of the secondary are connected to the anodes of diodes $D_1$ and $D_2$; their cathodes are joined together and connected to one end of the load resistor $R_L$, whose other end goes to the centre tap O. Output across $R_L$ is taken between the joined cathodes and O. Graph: output voltage (vertical axis) against time (horizontal axis) is a series of positive half-sine pulses, one for every half cycle of the input (pulsating dc, frequency twice that of the input).
Q18(i)5 marks · NumericalOpen: A 60 Ω resistor, a 1·0 H inductor and a 4μF capacitor are connected in series…

Solve the following.

A $60\,\Omega$ resistor, a $1\cdot0\text{ H}$ inductor and a $4\mu\text{F}$ capacitor are connected in series to an ac supply generating an emf $e = 300\sin(500t)\text{ V}$. Calculate:
(a)[2]
impedance of the circuit.
(b)[1.5]
peak value of the current flowing through the circuit.
(c)[1.5]
phase difference between the current and the supply voltage.
Show answer

Answer (a)

Formula used: Inductive reactance: XL = 2*pi*f*L with L = 1 H, f = 79.58 Hz, so XL = 500 ohm

$\omega = 500\text{ rad s}^{-1}$ $X_L = \omega L = 500\times1.0 = 500\ \Omega$ $X_C = \dfrac{1}{\omega C} = \dfrac{1}{500\times4\times10^{-6}} = 500\ \Omega$ $Z = \sqrt{R^2 + (X_L - X_C)^2} = \sqrt{60^2 + 0} = 60\ \Omega$ (the circuit is in resonance)

Final answer: 60 ohm

Answer (b)

Peak emf $e_0 = 300\text{ V}$. $i_0 = \dfrac{e_0}{Z} = \dfrac{300}{60} = 5\text{ A}$

Final answer: 5 A

Answer (c)

Formula used: Phase angle of a series LCR circuit (current lags by phi): phi = atan((XL - XC)/R) with R = 60 ohm, XC = 500 ohm, XL = 500 ohm, so phi = 0 deg

$\tan\phi = \dfrac{X_L - X_C}{R} = \dfrac{500 - 500}{60} = 0$, so $\phi = 0^\circ$

Final answer: 0 degree

Q18(ii)5 marks · NumericalOpen: An ac generator generates an emf which is given by e = 311sin(240π t) V…

Solve the following.

(a)[2]
An ac generator generates an emf which is given by $e = 311\sin(240\pi t)\text{ V}$. Calculate: (1) frequency of the emf. (2) r.m.s. value of the emf.
(b)[3]
The primary coil of a transformer has $60$ turns whereas its secondary coil has $3000$ turns. (1) If a $220\text{ V}$ ac voltage is applied to the primary coil, how much emf is induced in the secondary coil? (2) If a current of $5\text{ A}$ flows in the primary coil, how much current will flow in a load in the secondary coil? State the assumption you have made regarding the transformer, in this calculation.
Show answer

Answer (a)

Formula used: rms and peak values: rms = peak/sqrt(2) with peak = 311 V, so rms = 219.9 V

Comparing with $e = e_0\sin\omega t$: $e_0 = 311\text{ V}$ and $\omega = 240\pi\text{ rad s}^{-1}$. (1) $f = \dfrac{\omega}{2\pi} = \dfrac{240\pi}{2\pi} = 120\text{ Hz}$ (2) $e_{rms} = \dfrac{e_0}{\sqrt2} = \dfrac{311}{1.414} = 220\text{ V}$

Final answer: $f = 120\text{ Hz}$, $e_{rms} = 220\text{ V}$

Answer (b)

Formulas used: Ideal transformer: Vs/Vp = Ns/Np with Ip = 5 A, Np = 60, Ns = 3000, Vp = 220 V, so Vs = 11000 V Ideal transformer: Vs/Vp = Ns/Np with Ip = 5 A, Np = 60, Ns = 3000, Vp = 220 V, so Is = 0.1 A

(1) $\dfrac{V_s}{V_p} = \dfrac{N_s}{N_p}$, so $V_s = 220\times\dfrac{3000}{60} = 11000\text{ V}$ (2) For an ideal transformer, $V_pI_p = V_sI_s$, so $I_s = I_p\dfrac{N_p}{N_s} = 5\times\dfrac{60}{3000} = 0.1\text{ A}$ Assumption: the transformer is ideal, with 100% efficiency (no energy loss, so input power equals output power).

Final answer: $V_s = 11000\text{ V}$, $I_s = 0.1\text{ A}$

Q19(i)5 marks · Short answerOpen: Name the series of lines of hydrogen spectrum which lies in the (1) ultraviolet…

Answer the following.

(a)[1]
Name the series of lines of hydrogen spectrum which lies in the (1) ultraviolet region. (2) visible region.
(b)[1]
How much is the angular momentum of an electron when it is orbiting in the second Bohr orbit of hydrogen atom?
(c)[3]
With reference to Nuclear Physics, answer the following questions. (1) What is meant by “Isotopes”? (2) Define $1\text{ u}$ (where u stands for unified atomic mass unit).
Show answer

Answer (a)

(1) Ultraviolet region: Lyman series. (2) Visible region: Balmer series.

Answer (b)

Formula used: Angular momentum in the nth orbit: L = n*h/(2*pi) with h = 6.63e-34 J s, n = 2, so L = 2.11e-34 J s

$L = \dfrac{nh}{2\pi}$; for $n = 2$, $L = \dfrac{2\times6.63\times10^{-34}}{2\pi} = \dfrac{h}{\pi} = 2.11\times10^{-34}\text{ J s}$

Final answer: $2.11\times10^{-34}$ J s

Answer (c)

(1) Isotopes are atoms of the same element (same atomic number $Z$) having different mass numbers $A$, i.e. different numbers of neutrons. (2) $1\text{ u}$ is one-twelfth the mass of a carbon-12 atom ($1\text{ u} = 1.66\times10^{-27}\text{ kg}$).
Q19(ii)5 marks · DerivationOpen: Using Bohr’s Theory of hydrogen atom, obtain an expression for the velocity of…

Answer the following.

(a)[3]
Using Bohr’s Theory of hydrogen atom, obtain an expression for the velocity of an electron in $n^{\text{th}}$ orbit of an atom.
(b)[2]
What is meant by “binding energy per nucleon” of a nucleus? State its physical significance.
Show answer

Answer (a)

Velocity of the electron in the $n^{th}$ Bohr orbit of an atom of atomic number $Z$.
  1. Let an electron (mass $m$, charge $e$) revolve with speed $v$ in a circular orbit of radius $r$ round a nucleus of charge $+Ze$.
  2. The electrostatic force provides the centripetal force: $\dfrac{mv^2}{r} = \dfrac{1}{4\pi\epsilon_0}\dfrac{Ze^2}{r^2}$, so $mv^2r = \dfrac{Ze^2}{4\pi\epsilon_0}$ ... (1)
  3. By Bohr's quantisation condition, angular momentum is an integral multiple of $\dfrac{h}{2\pi}$: $mvr = \dfrac{nh}{2\pi}$ ... (2)
  4. Divide (1) by (2): $v = \dfrac{Ze^2}{4\pi\epsilon_0}\cdot\dfrac{2\pi}{nh}$.
  5. Hence the velocity in the $n^{th}$ orbit is $v = \dfrac{Ze^2}{2\epsilon_0 nh}$ (for hydrogen, $Z = 1$: $v = \dfrac{e^2}{2\epsilon_0 nh}$).

Answer (b)

Binding energy per nucleon is the binding energy of a nucleus divided by its number of nucleons ($BE/A$), i.e. the average energy needed to remove one nucleon from the nucleus. Significance: it is a measure of the stability of the nucleus; the higher the binding energy per nucleon, the more stable the nucleus.
Q205 marks · Case basedOpen: There are two types of lenses: Converging lenses and Diverging lenses…

Answer the following.

There are two types of lenses: Converging lenses and Diverging lenses, depending on whether they converge or diverge an incident beam of light. They are also called convex or concave lenses. Lenses are usually made of glass. Convex lenses are more popular as they form a real image of an object. They are widely used in our daily life, for instance, in microscopes, telescopes, projectors, cameras, spectacles etc. Microscopes are used to view small and nearby objects whereas telescopes are used to see distant objects.
(i)[1]
State any one factor on which focal length of a lens depends.
(ii)[1]
Give an example where a convex lens behaves like a diverging lens.
(iii)[1]
What type of lens is used in a camera?
(iv)[1]
Write an expression for magnifying power of a compound microscope when its final image lies at the least distance of distinct vision ($D$).
(v)[1]
State any one difference between a reflecting telescope and a refracting telescope.
Show answer

Answer (i)

Focal length depends on the refractive index of the material of the lens (any one: radii of curvature of its surfaces, refractive index of the surrounding medium, wavelength of light).

Answer (ii)

A convex lens behaves like a diverging lens when it is placed in a medium of higher refractive index than that of the lens, e.g. a glass convex lens immersed in carbon disulphide.

Answer (iii)

A convex (converging) lens is used in a camera.

Answer (iv)

$m = \dfrac{v_o}{u_o}\left(1 + \dfrac{D}{f_e}\right)$ (in magnitude), where $v_o$ and $u_o$ are the image and object distances for the objective and $f_e$ is the focal length of the eyepiece.

Answer (v)

A reflecting telescope uses a concave mirror as its objective, whereas a refracting telescope uses a convex lens as its objective (any one: a mirror is free from chromatic aberration; a mirror can be made much larger).

About this board paper

The ISC Physics 2023 Question Paper is a board paper for Class 12: 43 questions in printed order, 70 marks in all, asked from 14 chapters. The board paper is the exam itself: the question paper CISCE set for that year’s ISC candidates. Solve it in one sitting, in the time allowed, to see how questions are worded and how hard the real paper is.

The layout of the current Physics paper (sections, marks, choices) is in the paper pattern guide.

By section

SectionQuestionsMarks printed*
A1414
B1218
C1233
D525

By kind of question

KindQuestionsMarks printed*
Numerical1029
Short answer1523
Derivation620
MCQ77
Case based15
One word33
Drawing13

By chapter

ChapterQuestionsMarks printed*
Ray Optics and Optical Instruments615
Current Electricity610
Alternating Current210
Atoms210
Wave Optics58
Moving charges and magnetism48
Electrostatic Potential, Potential Energy and Capacitance35
Semiconductor Electronics: Materials, Devices and Simple Circuits44
Dual Nature of Radiation and Matter24
Electric Charges and Fields24
Nuclei24
Electromagnetic Induction23
Semiconductor diode13
Electromagnetic Waves22

* Marks are those printed on each question; where a question offers an either-or choice, both options are counted, so the totals can come to more than the paper’s own total.

Common questions

How many questions are in the ISC Physics 2023 Question Paper?

43 questions, 70 marks in all, shown in full and in printed order on this page.

Which chapters does the ISC Physics 2023 Question Paper ask most about?

By number of questions: Ray Optics and Optical Instruments (6), Current Electricity (6), Wave Optics (5) and Moving charges and magnetism (4).

Does this page have the answers to the ISC Physics 2023 Question Paper?

Tap “Show answer” under a question to see its answer. The download button saves the paper as a PDF, with or without the answers.