The continuous graph below shows variation of emf versus time when applied to a component X. The…
(a)[3]
The continuous graph below shows variation of emf versus time when applied to a component X. The dotted line graph is that of current versus time.
(1) Identify the component X.
(2) Calculate the root mean square value of the current ($I_{\text{rms}}$) flowing in the circuit.
(3) Calculate the value of the opposition (in ohm) offered by the component X to the flow of current through it.
(b)[2]
Obtain an expression for the resonant frequency ($f_{0}$) for a series LCR circuit.
(1) The current reaches its maximum 90° (a quarter period, 100 s of the 400 s period) before the emf, i.e. the current leads the emf by $\pi/2$. Hence X is a capacitor.
(2) Peak current from the graph $I_0 \approx 30$ A, so $I_{rms} = \frac{I_0}{\sqrt2} = \frac{30}{1.414} \approx 21.2$ A.
(3) Peak emf $E_0 = 50$ V, so the opposition is the capacitive reactance $X_C = \frac{E_0}{I_0} = \frac{50}{30} \approx 1.67\ \Omega$.
Final answer: 21.2 A
Answer (b)
Resonant frequency of a series LCR circuit.
In a series LCR circuit the impedance is $Z = \sqrt{R^2+(X_L-X_C)^2}$, with $X_L = \omega L$ and $X_C = \frac{1}{\omega C}$.
At resonance the current is maximum and the impedance is minimum ($Z=R$), which happens when $X_L = X_C$.
So $\omega_0 L = \frac{1}{\omega_0 C}$, giving $\omega_0^2 = \frac{1}{LC}$, i.e. $\omega_0 = \frac{1}{\sqrt{LC}}$.
Since $\omega_0 = 2\pi f_0$: $f_{0} = \frac{1}{2\pi \sqrt{LC}}$