‹ Back to the paper
Question 18(ii)
5 marks
PhysicsISC 2026 Improvement Physics Paper 1NumericalAlternating Current
Solve the following.
A train is moving on horizontal tracks 1.2m apart with a constant velocity of 36 km/hr. Vertical…
(a)[2]
A train is moving on horizontal tracks 1.2m apart with a constant velocity of 36 km/hr. Vertical component of the earth’s magnetic field at that place is $4 \times 10^{-5}\text{ T}$. Calculate the emf induced between the two ends of the axle of the train.
(b)[2]
An ac source generates an emf 'e' given by
$e = 314 \sin (120\pi t)\text{ V}$
Calculate the root mean square value of the generated emf ($E_{\text{rms}}$).
(c)[1]
A resistor, connected to an ac supply, is carrying some current. It is desired to reduce this current by connecting an electrical device 'D' in series with it. Which device is most energy efficient: a resistor, an inductor or a capacitor? Give a reason for your answer.
Answer
Answer (a)
$v = 36\text{ km/h} = 10\text{ m s}^{-1}$. The axle (length $l=1.2$ m) cuts the vertical component of the field: $\varepsilon = B_v l v = 4\times10^{-5}\times1.2\times10 = 4.8\times10^{-4}\text{ V}$.
Final answer: 4.8e-4 V
Answer (b)
Comparing $e = 314\sin(120\pi t)$ with $e = E_0\sin\omega t$ gives $E_0 = 314$ V. $E_{rms} = \frac{E_0}{\sqrt2} = \frac{314}{1.414} \approx 222\text{ V}$.
Final answer: 222 V
Answer (c)
An inductor (a pure inductor, like a pure capacitor, consumes no average power over a cycle: the current lags the voltage by $90^\circ$ so the power factor is zero, it is wattless, and the energy stored is returned to the source). A resistor, in contrast, dissipates energy as heat ($I^2R$).