Prashnikaप्रश्निका
Code
About
‹ Back to the paper

Question 20

5 marks

PhysicsISC 2025 Physics Paper 1Case basedSemiconductor Electronics: Materials, Devices and Simple Circuits

Answer the following.

When a television set (scientifically known as a television receiver) is opened, many components…

When a television set (scientifically known as a television receiver) is opened, many components like semiconductor diodes, transistors, capacitors, resistors etc. can be observed on its motherboard. There are different types of diodes like photo diode, Zener diode, LED etc. found in the T.V. set. With the help of these components, a television receives audio as well as video signals.
(i)[1.5]
A semiconductor diode has two types of semiconducting materials: ‘P’ type and ‘N’ type. What is the difference between them?
(ii)[1.5]
Draw a labelled diagram of a full wave rectifier. Show graphically how its output voltage varies with time.

Draw: circuit diagram of a full wave rectifier with centre-tapped transformer, two diodes, and load resistor, along with input and output voltage waveforms

Must show: centre-tapped transformer, two p-n junction diodes D1 and D2, load resistor R_L, input AC waveform, output rectified DC waveform

(iii)[2]
What type of diode can be used as a voltage regulator?
Open in the Physics formula calculator

Answer

Answer (i)

BasisP-typeN-type
DopantTrivalent impurity (e.g. boron, aluminium)Pentavalent impurity (e.g. phosphorus, arsenic)
Majority carriersHolesElectrons
Minority carriersElectronsHoles

Answer (ii)

Worked out by the server: A full-wave rectifier with a centre-tapped transformer: D1 conducts in one half-cycle and D2 in the other, so the current through the load is always the same way and the output frequency is twice the input's.

Centre-tapped full wave rectifier: the secondary of the transformer has a centre tap, connected to one end of the load $R_L$; the two ends of the secondary connect to the anodes (p-sides) of diodes $D_1$ and $D_2$, whose cathodes (n-sides) are joined and connected to the other end of $R_L$. During one half cycle of the input $D_1$ conducts and during the other half cycle $D_2$ conducts, so the current through $R_L$ is always in the same direction. Input: a sine wave of period $T$. Output across $R_L$: only positive humps (pulsating d.c.), two humps in every period $T$, so the output frequency is twice the input frequency.

Answer (iii)

Zener diode (operated in reverse breakdown).